Hello,Thank you for your help.

Hello,In idle and N the RPM range is normal, however when the noise / vibration stars you can see the RPM needle move very very slightly only when I feel the vibration or hear the noise. The noise is Noise___Pause___Noise_____Pause. Thank you.

Update – 1. When the engine is cold and I turn on the car, everything is perfect, no noise no vibration.2. If I drive the car at 100 Kph for 15 minutes and I park it and put it in N, I get only the sound – now the sound sounds like a minute rattling. It is coming from the middle of the engine ar...

Hello,The vibration is defiantly coming from the engine. You can just feel it in the steering wheel while the car is idling and the vibration matches the hum sound the is emanated every time I feel the vibration.Could it be from the transmission as it still rotates while in park ?Could it be from th...

Hello,Do you think the torque converter is causind the vibration? I have not checked the fluid because the car is 12 month old. However I will look at it tomorrow.Can worn out fluid cause the vibration?Thank you.

Hello,I have 2009 Vibe GT (2.4L, Automatic) with 50,000 kilometers. I purchased the car new and since new the oil used was Synthetic Castrol GTX . The car is stock without any modifications on it. All the 50,000 kilometers are highway.Today I noticed that while the car is parked (in park) and the en...

Greetings,Thank you for your comments. So to summarize: Mobile 1 with a Toyota filter?

Greetings,I have a 2005 Vibe which will be due for its first Oil change soon. I usually always use synthetic oil. I change my oil at Costco, where it is around 45 CND for Castrol GTX and a Fram filter. The vehicle I had before was older and did not have any problems running on Synthetic Oil. I have ...

Greetings,I understand in regards to the transmission. In regards to the badges: I would take them off the same way many do: heat up the badges area, use fishing line to take them off, then paint cleaner to dissolve the glue. Is there a better way? I mean no matter what you do you will have small su...

Greetings Everybody,Thank you for your advice.I have received the car back (1.2 weeks) and it was fixed. The synchro gear between 1st and 2nd was changed as well as the 1st and 2nd gears. The car runs fine. No noise or vibration, everything is fine. I want to take the badges off my car and I was won...

Greetings,The issue is as fallows. I drive 50 000 K a year so the warranty will be gone in 2 years. The reason why I want a new tanny is because the car was practically delivered damaged to me. The car does not drive (can't shift up to second or down to it from third) When I brought the car to the d...

Greetings,After two days, the dealer told me the synchro gears are faulty. They said they will take apart the transmission to check it and change the synchro gears. To me this is unacceptable as it means a "rebuilt" transmission. They told me that even if they did replace the transmission ...

Greetings,Thank you for your replies. I have brought the car to the dealer. The problem was getting worse as it started to grind from 3rd to 2nd as well. I was told unofficially that they would change the transmission; however they still did not give me a definite answer as they are still taking the...

Greetings,5 days a go I have purchased a base 5 speed 2005 Pontiac Vibe. The car runs fine, however: If I drive normally and shift from 1st to 2nd, I hear a horrible grinding noise (the type you hear when you lift your foot off the clutch and the gear is not in place), If I press the clutch and wait...

Greetings,5 days a go I have purchased a base 5 speed 2005 Pontiac Vibe. The car runs fine, however: If I drive normally and shift from 1st to 2nd, I hear a horrible grinding noise (the type you hear when you lift your foot off the clutch and the gear is not in place), If I press the clutch and wait...