Page 1 of 1
Have I gone too far?
Posted: Thu Jun 17, 2004 1:38 pm
by engine1
Just thought i'd ask. The old Hurst Pistol Grip Shifter!
http://pics.xs.to/pics/04065/hurst.jpg Piaa 115dB Dual Tone Horns (400hz and 500hz respectively)
http://pics.xs.to/pics/04065/horn.jpg Piaa Die-Cut Decals to flank the rearview mirror
http://pics.xs.to/pics/04065/piaa.jpg http://pics.xs.to/pics/04065/piaafrontal.jpg
Re: Have I gone too far? (engine1)
Posted: Thu Jun 17, 2004 1:42 pm
by ragingfish
That shifter is funny as hell! Nice touch. What kinda PIAA lighting are ya running there?
Re: Have I gone too far? (ragingfish)
Posted: Thu Jun 17, 2004 1:44 pm
by engine1
Every exterior light except for the front turns.
Re: Have I gone too far? (engine1)
Posted: Thu Jun 17, 2004 1:47 pm
by engine1
I don't think you can even get that shifter anymore from Hurst, it's not in any catalogues i've seen lately. Lol its alot of fun tho!!!!!
Re: Have I gone too far? (engine1)
Posted: Thu Jun 17, 2004 1:57 pm
by ragingfish
Quote, originally posted by engine1 » Every exterior light except for the front turns. What system though? Did you upgrade to HID? Or are you just running their bulbs?
Re: Have I gone too far? (ragingfish)
Posted: Thu Jun 17, 2004 2:04 pm
by engine1
Just the bulbs! I cant afford the true HID system, although these are the nastiest headlights ever; 135w highbeam....people get out of the way after one flash, those who don't wish they had lol!!
Re: Have I gone too far? (engine1)
Posted: Thu Jun 17, 2004 2:32 pm
by ragingfish
So you upgraded the wiring then?How difficult was that to do?I'd love to put even 100w bulbs in, but last time I tried that, before I understood anythign on this car, I smelled burning...
Re: Have I gone too far? (engine1)
Posted: Thu Jun 17, 2004 10:48 pm
by ArcsVibe
Love the shifter
Re: Have I gone too far? (ArcsVibe)
Posted: Thu Jun 17, 2004 10:58 pm
by drunkenmaxx
hey man, go with what you know. if you think it's cool, then screw everyone else!i think that stuff is cool, very unique!
Posted: Fri Jun 18, 2004 1:27 am
by Atomb
with that much leverage on the shifter and full hand grip, i'm amazed you're not punching a hole into your dash when shifting into 3rd!
Re: Have I gone too far? (ragingfish)
Posted: Fri Jun 18, 2004 4:47 am
by engine1
No wiring changes at all. These only draw max 60 watts of power, no more than a conventional bulb, Piaa (and most others) uses different gases to acheive the desired brilliance. These will do no harm to your harness what so ever. I have used very cheap World Light bulbs in my wifes car and burnt out one h/l socket, but you will never have a problem with Piaa products. Even the horns required no relay or major wiring hassle, i just used two power taps, jacked into the OE power to the horn, made up a couple of wires to go from the stock wire to the two horns and Piaa supplied the premade grond harness, pretty slick.
