Page 1 of 1
WTB 2009 Pontioac Vibe hitch
Posted: Mon Jun 04, 2018 9:48 am
by Glenpointe
Just purchased a bike and now looking for a hitch. If you have a hitch for sale and fits 2009 Vibe, let me know. Thanks, Glen
Re: WTB 2009 Pontioac Vibe hitch
Posted: Tue Jun 05, 2018 3:07 am
by zbyers
the hitch is the same as for the 2003-2008 vibe. the biggest difference is if you have a second gen GT, you'll need to cut or remove the black....flair thing off the back bumper.
Drawtite or Curt both make decent hitches for the vibe. Usually the drawtite is a 6 bolt (3 per side), while Curt is a 4 bolt. Some prefer the 6 bolt. I like the looks of my Curt hitch vs. my drawtite; but the drawtite doesn't hit my muffler so there is no rattling.
Re: WTB 2009 Pontioac Vibe hitch
Posted: Sat Jun 09, 2018 5:35 am
by Glenpointe
I have a 2009 Vibe with 2.4L engine (not a GT). Do I need to modify anything in order to install the hitch? Thanks,
Re: WTB 2009 Pontioac Vibe hitch
Posted: Sat Jun 09, 2018 10:45 am
by tpollauf
Check out this posting a few years ago ....
viewtopic.php?f=11&t=46116&p=519221&hil ... ch#p519221
You'll likely need to tap & clean out the threads so the installation goes smooth! Let us know how it goes!
Re: WTB 2009 Pontioac Vibe hitch
Posted: Mon Jun 11, 2018 7:24 am
by runningslow
I'd recommend the Curt 12221. The key with a 2nd Gen GT is to make sure the hitch will clear the fascia on the bumper. The 12221 should clear just fine. The Curt 12234 will also fit, but would require some bumper trimming.
Also, as was said, unless the car is pristine underneath, the only thing you'll probably need to do is run a tap through the threads to clean them out first. I didn't have to on my Florida Vibe, but I surprisingly needed to on my Texas car. The threads were grody. I made my own tap from an extra bolt and cut slots down the threads with a Dremel. Worked well enough for a one time job.
Re: WTB 2009 Pontioac Vibe hitch
Posted: Fri Jul 20, 2018 9:17 pm
by Vibester04
I have a brand new never installed Curt 12221 that I can ship out to you. Worth 200 US, will sell for 150. Has original hardware and plastic wrap. PM me if interested
Re: WTB 2009 Pontioac Vibe hitch
Posted: Sun Sep 23, 2018 6:08 pm
by Transylvania
I have a Curt hitch for sale that came with my 2010 Vibe. Let me know if you are still interested and will send pictures.
Re: WTB 2009 Pontioac Vibe hitch
Posted: Fri Oct 26, 2018 11:01 am
by XYooper906
I'm also looking for a used Curt 12221 to put on my 09 Vibe GT.
If you have one, please post your price including shipping to 30215.
For comparison, a new one is about $100 w/free shipping on eBay. Thought I'd check here beforehand.
Thanks!
Steve K.
Fayetteville, GA