GenVibe - Community for Pontiac Vibe Enthusiasts

Here's a couple of variations to updated our logo/sticker. I think it's more updated and not quite as "Flintstones" looking. What do you think? UPDATE: Here's another couple... If you like, which one?

Attached files

i like the idea of it, but don't care for DOT spelled out. i would suggest putting the genvibe and a small logo in red for the dot and then com.

First off, don't like 'em! Second, they WILL be more expensive to make! Third, I have my Flintstone's one on my car and it's staying there! Nice try though....

It looks good, but between the old one and yours, I too like the current logo. I think you should take out the word "dot" and just put a period in there. You also may want to change the 1zz and 2zz enthusiasts to something about Pontiac Vibe enthusiasts. Just a suggestion.

I agree, the flinstones look isn't cutting it...I pulled the GVC decals off my windows a day or two ago because I just was not liking the look of that logo anymore...

I like these alot. i would also put these on my vibe. The flintstone ones look a little too kiddy. These are more of a upbeat and fresh design.I wouldn't spell out the "dot" cause people may think that it's a different site. I know it's hard to say but some people just have no common sense.

I like the general look of these logos as well - minus the DOT spelled-out. Personally, and as a few have already mentioned, I do not care to put the GenVibe decal on my vehicle due to the 'elementary' look of the current GenVibe logo - a more modern and 'high-tech' looking logo would be preferred. The MatrixVibe.Net logo is good looking - as it incorporates a nice clean font and the tach.I'll see what would need to be done to get a new logo design started - preferrably through suggestions and input from GenVibe members. Updates will follow soon.

oh boy, another contest?

Thanks for the input, guys. I'll do some concepts without the "dot"There reason for "1ZZ and 2ZZ enthusiasts" is because of our bothers and sisters with matrices and celicas that frequent the board. In all standards, the matrixvibe.net logo is horrible. More than one font can be used in a design if done with skill. But a logo is different story. Take for example, any major company you know of. How many fonts/typefaces? Plus, the matrixvibe.net logo is way over done. I've seen sooo many boards and clubs with the "tach" design. Cliche... Our cars are different. Let's show it!

It would be fine if it were not the exact same logo as Grand Valley State University here in Michigan!

Attached files

cheater!!

HOLY CRAP! Where did that come from! That freakin' sucks!!!!! Back to Illustrator I go...I can't believe that! It happens so often. Come up with an idea and of course it's already been done...nothing new under the sun, I guess...And I don't appreciate being called a cheater/theif. I pride myslef in coming up with new and original ideas. Sometimes, they're just not. This is what I do for a living, so, I take it quite seriously. Just tryig to give us a new, updated look.

On the "1ZZ and 2ZZ" thing, I guess it depends on why you want the new logo. If you want to attract new members that have more than just a general knowledge about the car already, then they'll know what you mean by 1ZZ and 2ZZ. If you want to attract the average current or prospective Vibe owner, they probably wouldn't know what that means, and then not being a ZZ enthusiast, they might not bother checking out the site. I'm not particularly a 1ZZ or 2ZZ enthusiast myself. I just like the car.

Here, I did this real quick. What do ya think?

Attached files

quote:oh boy, another contest?Probably not this time - we'll take suggestions, examples, etc.quote:Plus, the matrixvibe.net logo is way over done. I've seen sooo many boards and clubs with the "tach" design. Cliche... I agree - I've seen it elsewhere, I was just comparing it to our logo.quote:If you want to attract the average current or prospective Vibe owner, they probably wouldn't know what that means, and then not being a ZZ enthusiast, they might not bother checking out the site. I agree here as well. Something more general - or not even necessary as GenVibe.com works - gets the point across and hopefully a new Vibe/Matrix member will check out the site.

Not being self-centered but IF we did make a new logo for a decal/sticker, would everyone put it on their cars? There isn't too many people with them now! Just a thought!

I really like those, just take out the "dot" like they said. I like how they are more sharper looking, not the cartoony look.Later,

I think the "Genvibe.com" part is a little too small. It would be hard to see on the car when driving by.

Something like this maybe?

Attached files

How about something that matches the font of the vibe logo? here's a rough cut at something like that, not as close to the badges as I wanted, but close enough to get the idea across.

Attached files

that's a heck of an idear! maybe a little spicing up, but what says vibe better than the vibe font?

DAMN.....i wish more people liked your idea SAVED, b/c i love them....so sophisticated...even the dotcom spelt out is something i am seeing very young and stylish companies start to encorporate into their own logos. even the zz enthusiast part is great b/c it reeks goofy when you try to write a sentence about forums and info for pontiac vibes and fit it all on a sticker.if they went into production.....i'd have four!Saved....real nice quality job you did there....in a marketing class i you would have recieved high marks for those as they are exactly what companies are trying, but struggling to come up with!!now....as for this one: well i have to admit something like this is way more likely to go into production as it is simple and easy to make and peeps really cant hate anything about it......i do like the vibe font idea....very clever.....i'd have this on my car....just not as exciting as the ones Saved made up.

OK - I'll take the risk of being attacked: what does 1zz and 2zz stand for? Where did it come from?

nah....we wont attack you....1zz and 2zz are the factory codes for our engines.....its kind of a big deal b/c corollas, matrix', celicas, MR2s...they all have our engine in them so it relates us to them. 1zz is the 140hp engine or as toyota would have you think; 130hp....the 2zz is 180hp.

I wouldn't like the one that matches the font of the Vibe on the car due to the fact that soon i'm gonna take those off. possibly this week-end. Need a nice hot day.

quote:How about something that matches the font of the vibe logo? here's a rough cut at something like that, not as close to the badges as I wanted, but close enough to get the idea across. Now that I like!

Guess I should add my two cents. Check these out... maybe we could have some choices?

Attached files Genvibe.doc (19.5 KB) 

Well, I don't have the fonts you used, so it looks pretty ho hum.Where can I get fontdinerdotcomRen & StimpyDeftone StylusGood Times Showcard gothic

DisneyDJ:You need to embed the fonts in teh document if anyone else is going to be able to see them...I'm not installing any new fonts on my system -- 2000 is too many as it is...

Let's try it this way... sorry.

Attached files

The fourth one almost looks Pontiac-esque...but honestly, I think nothing makes a worse logo than just using a fun font (as it appears was done with the current one...)

I would agree...

Yours is good saved...but I'm unsure how I feel about .com being spelled out, and i don't like the 1zz and 2zz line...How about JUST genvibe.com? Wonder how THAT would look...

quote:This one I like the best so far.

ehhhh....kinda big and plain for car window...i dont want to be a rolling ad for genvibe. and i cant figure out if those 3 triangles at the right are supposed to be something?????

quote:This one I like the best so far.Back to my original post....quote:Not being self-centered but IF we did make a new logo for a decal/sticker, would everyone put it on their cars? There isn't too many people with them now! Just a thought! That looks hard and expensive to make! But I agree this is the best one so far....

personally, i think they are all cool!

I think it's too bad this didn't get discussed prior to the shirt design contest.

msmyer:No harder than the current sticker to make...maybe a dollar or two more expensive. whoa.

No harder than the current sticker...

saved, i do like the color scheme and also the whole eye appealing look to it better than any other ones. however, i stick with the dot com being .com and wonder about the case. i tend to prefer the lowercase when refering to anything .com-ish. i like your 1zz and 2zz enthusiasts as well, because it gives a better notion of the enthusiasts part. people will most likely assume you're talking about a vibe since it would be on a vibe... one would think. can you play around with the case a little more?

Just when I get my so called "flintstone" decals in my back windows... now we want to change them?

quote:How about something that matches the font of the vibe logo? here's a rough cut at something like that, not as close to the badges as I wanted, but close enough to get the idea across. That's the only one I've seen so far that I'd consider putting on MY car. Anybody know where to get a copy of this font, or what it's called??

I agree. It would be cool if that one could be made into an actual badge like the current "vibe" badge. I'd do that for sure!

I've got connections that can make these stickers for us. I'll contact him tomorrow and see what kinda price we're talking.

I agree that the current logo is a bit...how do you put it....not ever gonna be on my window. However as I am superficial (and a sucky speller) I would prefer any of the new designs to grace my back window. I like to race and show of my car as most of you do. I like the aggresive looks and would prefer that the new emblem or logo be multicolored, not huge as to block out the sun. The black and red go great. Lots of great ideas have been put forward definately would buy one of the new designs in whatever style it comes out in but please no dot com one word is good. Just my two pennies.

i agree whole heartedly with you, celtic. i would not put the current sticker anywhere near my vibe. i've always been a fan of red/black/white color combo. whatever it is, i'd probably get it. i think the genvibe.com logo in font like the badging is a NEAT idea, but dont think i'd put that on my car either. still a bit cheesy for my tastes. i like a clean smooth look, san serif and not scripty.

quote:This one I like the best so far.This one I like but when I initially read it I read it as an M where the "V" would be and it bugs me. When I just glance at something (especially on the road) I want it to be easy to read.

I like those ones alot, especially the little "V" inside the "G" idea, although I don't remember what the current ones look like... -=Paul=-

just screwing around

Attached files