Page 1 of 1

revised part-out thread

Posted: Mon Sep 12, 2016 9:36 am
by thebarber
ok, i pulled apart the vibe and these are the pieces im selling as theyre easy to get off etc.

if you want some random trim piece you can have it cheap, but it'll have to wait for the next time i go to the car

so

stainless axleback. looks exactly like TRD, but no engraving. (corzryde has a TRD and is local to me, which is why i say it)
100usd/125cad picked up
Image

roof rail caps NO BROKEN CLIPS.
is $10usd/15cad each +shipping reasonable? if not, make an offer
Image

2003 XRS/GT ecu. PnP to a 2004 for 6200rpm lift.
$100usd/125cad shipped
Image
Image

6 speed knob. leather worn off a bit when i bought the car. still in good shape otherwise.
$30usd/40cad + shipping
Image
Image
Image

kenwood HU/car mount/harness. will take an mp3 stick. pnp into any 2003-2008
$40usd/50cad + shipping
Image

storage drawer. $5usd/5cad +shipping
Image
Image

vibe 03-08 roof rack delete kit. everyone know these fibreglass pieces fit terribly when you buy them. ive trimmed/modified these to fit perfectly. painted black. comes with stainless extended mounting bolts (8).
$150usd shipped to lower 48, 125cad picked up.
Image

$5usd/5cad + shipping
Image

$5usd/5cad +shipping
Image

cruise stalk
$5usd/5cad + shipping
Image

lower shifter console. drawer stays closed pretty well, iirc.
10usd/15cad picked up
Image

oem tweeters and covers.
SOLD

i have TWO oem shift boots, one with rips/holes one without
$10usd/15cad for both
Image

steering column plastics
FREE
Image

upper grills. i have TWO sets. 1.5 sets shown. i also think i have ONE decent pair of lowers
10usd/15cad per pair
Image

oem roof rail crossbars.
$80usd shipped per pair/60CAD picked up
Image

2003 XRS/GT cluster. ~124xxx MILES. speedo in MPH.
$80usd shipped/ $75cad picked up
Image

oem mats. hole in DS front, iirc
$10usd/15cad for the set
Image

carbon fibre stubby antenna
$5usd/5cad + shipping
Image

i have TWO 2zzge engine covers. good shape, just filthy
$10usd/15cad
Image

K&N typhoon intake. filter needs cleaning. MAF included
sold

2zzge engine
~124xxx miles. runs well, pulls hard.
$650usd picked up, 900CAD

c60 transmission
~124xxx miles. need to take 1-2 shifts at redline easy. would make a good 6speed swap for a 1zz
300USD, 400CAD

2zzge fidanza flywheel.
sold

exedy clutch (good for 1zz or 2zz).
sold

OEM Suspension with 90k miles on it. everything assembled with struts caps etc for easy swap.
sold

STILL IN THE CAR:
leather steering wheel - - i'll take it out when i send the car to the wreckers.

GONE/UNAVAILABLE
coilovers
green winters - you can have them for free if you swap something else onto the car

Re: revised part-out thread

Posted: Mon Sep 12, 2016 9:59 am
by thebarber
i also have a 2zz alternator ($40usd/50cad)
2zz intake manifold ($50usd/60cad)
TWO 2zz throttle bodies (100usd/120cad)
2zz exhaust manifold NOT port matched ($50usd/60cad)

Re: revised part-out thread

Posted: Mon Sep 12, 2016 4:49 pm
by Fatpaul
Hey man I want the tweeter setup, shoot me a pm and let's get this done!

Re: revised part-out thread

Posted: Tue Sep 13, 2016 3:08 am
by thebarber
one 2003 ecu SOLD
tweeters/covers SOLD

Re: revised part-out thread

Posted: Tue Sep 13, 2016 4:54 pm
by Fatpaul
......

Re: revised part-out thread

Posted: Fri Sep 16, 2016 11:41 am
by ptjoe
Hello, do you have the cruise control module available? It sits behind the instrument cluster.

Re: revised part-out thread

Posted: Sun Sep 18, 2016 4:40 am
by thebarber
ptjoe wrote:Hello, do you have the cruise control module available? It sits behind the instrument cluster.
i should, yes

Re: revised part-out thread

Posted: Tue Sep 20, 2016 6:46 am
by Tmontague
Anyone know if the stock suspension will fit on my '05 awd vibe without lowering it's height? If so i'll buy them


Barber, I'm also interested in buying the air recirculate servo from you. Located behind glove box on left size held on by 2 10mm or 7/16 bolts. I can pick up

Re: revised part-out thread

Posted: Tue Sep 20, 2016 8:36 am
by morrisangelo
GT air intake tubing BEFORE the air box (down in the LF wheel well under battery)?

Re: revised part-out thread

Posted: Tue Sep 20, 2016 11:03 am
by thebarber
morrisangelo wrote:GT air intake tubing BEFORE the air box (down in the LF wheel well under battery)?
car came with SRI, but im sure i have the tubing before the airbox from another GT/XRS. hows $10usd plus shipping?
Tmontague wrote:Anyone know if the stock suspension will fit on my '05 awd vibe without lowering it's height? If so i'll buy them


Barber, I'm also interested in buying the air recirculate servo from you. Located behind glove box on left size held on by 2 10mm or 7/16 bolts. I can pick up
oem suspension sold. only the fronts will fit awd

if you want to pull the air recirc, its yours

Re: revised part-out thread

Posted: Tue Sep 20, 2016 11:31 am
by Tmontague
sounds good, let me know when works for you
trevor.montague[AT]hotmail.com

Re: revised part-out thread

Posted: Thu Sep 22, 2016 8:29 am
by morrisangelo
YES, $10 + shipping works for the complete OEM GT air intake tubing leading into the airbox. Let me know a total and how to pay.
Thanks, Harvey

Re: revised part-out thread

Posted: Thu Sep 22, 2016 5:18 pm
by Khaj
mats available? how much shipped to Florida? zip code 32907
Also, do you have the outside driver door handle available? Mine's snapped.

Re: revised part-out thread

Posted: Fri Sep 23, 2016 6:50 am
by thebarber
Khaj wrote:mats available? how much shipped to Florida? zip code 32907
Also, do you have the outside driver door handle available? Mine's snapped.
have mats, handle too big a pain

shipping likely not cheap due to size and weight of package...i would guess 60CAD to ship

Re: revised part-out thread

Posted: Fri Sep 23, 2016 6:52 am
by thebarber
intake sold
stock suspension sold
flywheel sold
clutch sold

Re: revised part-out thread

Posted: Fri Sep 23, 2016 9:45 am
by thebarber
transmission sold

Re: revised part-out thread

Posted: Fri Sep 23, 2016 6:48 pm
by Khaj
thebarber wrote:
Khaj wrote:mats available? how much shipped to Florida? zip code 32907
Also, do you have the outside driver door handle available? Mine's snapped.
have mats, handle too big a pain

shipping likely not cheap due to size and weight of package...i would guess 60CAD to ship
nevermind. Not worth it to me. thanks!

Re: revised part-out thread

Posted: Sun Sep 25, 2016 7:06 pm
by thebarber
Khaj wrote:
thebarber wrote:
Khaj wrote:mats available? how much shipped to Florida? zip code 32907
Also, do you have the outside driver door handle available? Mine's snapped.
have mats, handle too big a pain


shipping likely not cheap due to size and weight of package...i would guess 60CAD to ship
nevermind. Not worth it to me. thanks!
Pretty well what I figured