Page 1 of 1
					
				need steel or alloy wheels
				Posted: Sun Nov 08, 2015 9:44 am
				by Hutchvibe
				I'm looking for a set of 16" wheels in clean serviceable condition for a set of winter tires.  I am near Allentown pa and willing to travel as much as a couple hundred miles for a clean set at a fair price.  I would even consider 3 wheels and complete the set off of e-bay if necessary. Reply thru this thread and we can make contact if you have them for sale. Thanks  in advance,  
 Hutch
			 
			
					
				Re: need steel or alloy wheels
				Posted: Sun Nov 08, 2015 9:57 am
				by vibenvy
				
			 
			
					
				Re: need steel or alloy wheels
				Posted: Sun Nov 08, 2015 10:08 am
				by kumquat
				What year/model?
			 
			
					
				Re: need steel or alloy wheels
				Posted: Sun Nov 08, 2015 10:59 am
				by Chiadog
				Consider finding compatible 15" rims on craigslist and saving about 25% every time you buy new tires, plus much smoother ride as a bonus! Tirerack, etc. also sell tire/wheel packages, ready to use.
			 
			
					
				Re: need steel or alloy wheels
				Posted: Sat Nov 14, 2015 3:26 pm
				by Hutchvibe
				2005 Base.
			 
			
					
				Re: need steel or alloy wheels
				Posted: Sat Nov 14, 2015 3:31 pm
				by Hutchvibe
				I've heard of dropping down to a 15 for winter tires.  What model would be compatible?  I would of course need the same bolt pattern and the offset would also need to match.  Any suggestions?
			 
			
					
				Re: need steel or alloy wheels
				Posted: Sat Nov 14, 2015 4:41 pm
				by gtv237
				You can get steelies pretty cheap from auto shop suppliers like key-stone. The place my shop uses can get just about any steel wheel for $25, new!
			 
			
					
				Re: need steel or alloy wheels
				Posted: Sat Nov 14, 2015 4:42 pm
				by jayoldschool
				I use 15s for winter as well.  Our cars share the bolt pattern with many VWs.  All MKIV cars: Beetle, Golf, etc.
			 
			
					
				Re: need steel or alloy wheels
				Posted: Mon Nov 16, 2015 9:11 am
				by runningslow
				A good source for factory 15" Toyota steelies would be from a Corolla (03-08 for sure).
			 
			
					
				Re: need steel or alloy wheels
				Posted: Fri Apr 15, 2016 9:02 am
				by Gloffer
				I have a set that you can have for free. You will be responsible for actual shipping cost. They're a little rusty, but NOT bent and have NOT been abused. Otherwise, they're going to the dump within the next few weeks.
			 
			
					
				Re: need steel or alloy wheels
				Posted: Wed Apr 20, 2016 1:28 pm
				by WestC4
				Hey gloffer, do you still have those steel wheels/rims?