GenVibe - Community for Pontiac Vibe Enthusiasts

hi i was wondering if these rims i saw on Kijiji would fit on my 2003 Pontiac vibe. they are 17inch rims dont know about the bolt pattern. any input would be great. thanks.http://img1.classistatic.com/c....jpegh ... /c....jpeg

Attached files

No those wont fit, they are for a 4 bolt but with two sizes drilled in. You need a 5 bolt by 100mm 5X100

Quote, originally posted by moonstonemike »No those wont fit, they are for a 4 bolt but with two sizes drilled in. You need a 5 bolt by 100mm 5X100^What they said. And it looks like he has the same wheels in grey.

I agree with the other two. Need a 5x100.

K thanks guys, so any input on if these rims will fit, guy said he took them off a pontiac, not sure what make though. there 16inchhttp://img1.classistatic.com/c....jpeg

Those look like they're off a Bonneville, and the Bonnie has a 5-114 bolt pattern, so unfortunately, no. Most Toyota rims as well as Scion rims will fit, though. Many on the board here have OEC TC rims on their Vibes, and they look good. EDIT: Lovemyraffe has TC rims on his Vibe, in his sig.

thanks alot i must be gettin annoying haha.any idea if these will fit, five bolt but there 18inch.http://img1.classistatic.com/c....jpeg

Oh not at all... Ask the seller for the bolt pattern. The Vibe's is 5x100. If it is 5x100, than it will work. 5x114, no. That will not work.

k thanks alot, these have a 5bolt gm pattern there 17inch and came off an aztec.any chance of them fitting?http://img1.classistatic.com/c....jpeg

Nope. From Pontiac, Grand Am and Sunfire rims will work. No other rims form Pontiac will work.

k great thanks, so will any 5 x 100 bolt rims fit.

Yes, ANY 5x100 bolt pattern rims will work.

k awesome so these rims should fit for sure.there 18inch 5x100/5x114.3http://toronto.kijiji.ca/c-car...43451

Yep, those'll work!

awesome thanks alot.so these ones should be good as well im assuminghttp://toronto.kijiji.ca/c-car...03349

Bolt pattern is not the only important thing.Offset too, as a wheel can endup too far inside the wheel well or to much outside. Here is a chart http://forums.genvibe.com/zerothread?id=41523Center bore of the wheel too, on Vibe its 54.1mm anything smaller will not even fit and bigger might require a center ring to prevent vibration.

Probibly should also mention tire size could kick your spedo off too. You need a different profile to in the end the OD is still the same as before.