Page 1 of 1

emanage..

Posted: Sun Feb 06, 2011 4:36 am
by 04chargedvibe
So ive been reading old post and everyons opinion on the emanage and unichip ect. and i just cant seem to make up my mind on which would be best to get if i went ahead with getting one. I hate to open another topic on this after reading all the old post but.. id like a few more opinions..

Re: emanage.. (04chargedvibe)

Posted: Sun Feb 06, 2011 5:37 am
by Salsa Guy
So you running a TRD SC or Turbo?

Re: emanage.. (rmckinjr)

Posted: Sun Feb 06, 2011 6:02 am
by 04chargedvibe
running the S/C and thinking about switching to a intake. have dc header and custom exauhst

Re: emanage.. (04chargedvibe)

Posted: Sun Feb 06, 2011 9:45 pm
by Salsa Guy
Unichip is perhaps the easist to install. People have sworn by them and at them. The come with a preconfigured tune. It can be adjusted but only by a Unichip Tuner (they cost about $800). Greddy EMB/EMU is certainly more expensive after the buying the unit (about $700 new) then a wiring harness (about $300). Then either you need to tune it or have someone else do it. THere's other options out there like AEM, Comcon and etc.

Re: emanage.. (rmckinjr)

Posted: Mon Feb 07, 2011 1:23 am
by BlueCrush
The Camcon, alone, cannot be used with the S/C. It can only be used as an add-on with the TRD S/C ECU or E-manage(s). The Camcon cannot adjust ignition timing. It can only adjust A/F ratio and Intake Cam position setting.