Page 1 of 1
need part # for airbox!
Posted: Tue Jul 30, 2002 10:00 am
by savedbyzero
Want to purchase a new intake hose incase i f' mine up while installing custom intake...any help?
Re: need part # for airbox! (savedbyzero)
Posted: Tue Jul 30, 2002 10:07 am
by d_m_kolb
I can help but I'm confused on what your doing?
Re: need part # for airbox! (d_m_kolb)
Posted: Tue Jul 30, 2002 11:12 am
by savedbyzero
custom intake...might cut around the sensor in order to afix bracket to new pipe...or does the whole piece of tube that the MAF sensor is mounted on come out of both sides(i now it does form the S-tube to the sensor, but not sure about in to the airbox) if it does, then i can just use rubber hose and clamps to attach it. plus i can reinstall a stock airbox if i need to take it in for work and avoid being hassled by the shop for a void warranty...
Re: need part # for airbox! (savedbyzero)
Posted: Wed Jul 31, 2002 9:42 am
by savedbyzero
(bump to top)help me out here, guys!
Re: need part # for airbox! (savedbyzero)
Posted: Fri Aug 02, 2002 1:05 pm
by savedbyzero
come on d-m-kolb! you're let me down here! got the number by chance? i've looked but no luck! i might try to call the aprts department tomorrow. hmmm. i'm a genious.
Re: need part # for airbox! (savedbyzero)
Posted: Sat Aug 03, 2002 5:35 am
by d_m_kolb
Take your intake tubing apart and see what it looks like and what peices come apart and which ones don't. I did this with mine and that way you'll know what you need and where to start.As for a part number for the filter I have a killer filter you should use for your custom CAI. Plus it's a new design that sucks in air from the top and not just the sides. MORE AIR FLOW!!!! I have the part # posted in my Custom CAI topic in the engine forum.
Re: need part # for airbox! (savedbyzero)
Posted: Sun Mar 07, 2004 3:31 pm
by ragingfish
I know this thread is about two years old, but thought I'd throw this out there:DUCT, FRONT AIR INTAKE 88969117 31.09
Re: need part # for airbox! (ragingfish)
Posted: Sun Mar 07, 2004 6:15 pm
by scherry2
better late than never. LOL
Re: need part # for airbox! (ragingfish)
Posted: Mon Jan 22, 2007 2:16 am
by jjhendri
Hi Ragingfish is this really the part # for the stock airbox for the vibe gt. I hot an '03, and one of the clips broke off. Can't tell if I did or if it was done when it went in for service. The $31.09 posted was that the dealer's price?Quote, originally posted by ragingfish »I know this thread is about two years old, but thought I'd throw this out there:DUCT, FRONT AIR INTAKE 88969117 31.09jjhendri
Re: need part # for airbox! (jjhendri)
Posted: Mon Jan 22, 2007 5:01 am
by scherry2
no its not you need the lower housing which is #88969104 there was no price in my lists. you'll have to go to the dealer or gmpartsdirect.com which list it as;GM PART # 88969104 CATEGORY: All PACK QTY: 1CORE CHARGE: $0.00GM LIST: $88.55OUR PRICE: $52.48 or go to toyota and see how much cheaper it is there.
Re: need part # for airbox! (scherry2)
Posted: Thu Jan 25, 2007 3:56 am
by jjhendri
scherry2 thanks for the info will post the price compare of gm vs toyoQuote, originally posted by scherry2 »no its not you need the lower housing which is #88969104 there was no price in my lists. you'll have to go to the dealer or gmpartsdirect.com which list it as;GM PART # 88969104 CATEGORY: All PACK QTY: 1CORE CHARGE: $0.00GM LIST: $88.55OUR PRICE: $52.48 or go to toyota and see how much cheaper it is there.