GenVibe - Community for Pontiac Vibe Enthusiasts

For anyone familiar with the Mr Grille products:From the looks of things the Mr Grille billet grill mounts over the OEM grill. Can it be adapted to replace the OEM instead of being zip tied to it? Or would there be too much clearance causing it to rattle around?

I have one on my '03, it zip ties. unless you manufacture some kind of brackets. which would be alot of work.

For an '06 it replaces the 2 large upper grilles, it bolts to the 2 small lower grilles and zip ties to the center lower grille. It's a big job to do the 2 large grilles, you pretty much need to remove the bumper. I never installed the 2 upper ones on my '06. I actually prefer the zip tie method I had on my '04. It was easy to install or remove and was very secure.

Quote, originally posted by Raven »For an '06 it replaces the 2 large upper grilles, it bolts to the 2 small lower grilles and zip ties to the center lower grille. Sorry, should have specified. I meant for the 03/04.

Zip ties, works excellent.

The only hard part of this project is the brackets.How to integrate them without looking like (removed).I've been toying with this project for a while now(with mesh),can't get past the bracket issue.But I'm not the greatest fabricator.

I had them on my 2004, with the zip ties it held well its still holding no issue and its been what like 3-4 years.

Quote, originally posted by northvibe »with the zip ties it held well its still holding no issue and its been what like 3-4 years.Yeah, my only issue is that I didn't want to buy the OEM grills. Quote, originally posted by kevera »I've been toying with this project for a while now(with mesh),can't get past the bracket issue.But I'm not the greatest fabricator. Nor am I. Back to the old drawing board.

oh I guess i didnt read the first post lol. On the 05+ it replaces the top two I think....YUP top two are replaced entirelyhttp://forums.genvibe.com/zerothread?id=22787