Page 1 of 1
Has anyone wired the e-Manage Ultimate
Posted: Sat Sep 22, 2007 9:12 am
by mac99d
Has anyone wired the e-Manage Ultimate to their vibe or matrix yet? If so do you have any pics of it I can get? I think I have it figured out but want to make sure. Help would be much appreciated. Thanks.
Re: Has anyone wired the e-Manage Ultimate (mac99d)
Posted: Fri Oct 12, 2007 1:44 am
by Petrucci914
Did you have any luck wiring this thing? I was looking at maybe getting the regular e-manage with the boomslang harness if I decide to part with the Unichip completely.
Re: Has anyone wired the e-Manage Ultimate (mac99d)
Posted: Fri Oct 12, 2007 2:00 am
by BlueCrush
Hey, Jason. You turbo'd yet?
Re: Has anyone wired the e-Manage Ultimate (BlueCrush)
Posted: Fri Oct 12, 2007 3:29 am
by kevera
I'm curious about this too.BLAQJAQ was asking me about this,Does anyone have a wiring diagram for the ecu.
Re: Has anyone wired the e-Manage Ultimate (kevera)
Posted: Fri Oct 12, 2007 3:32 am
by Petrucci914
I would just get the boomslang harness. NO WAY am I attempting to wire up that beast. But I wouldn't ge the ultimate, I'd get the standard one. That and the boomslang harness would be pretty close to the price of the unichip. And since you have to dynotune both if you're FI, it may be worth to go with the emanage.
Re: Has anyone wired the e-Manage Ultimate (Petrucci914)
Posted: Fri Oct 12, 2007 5:03 am
by kevera
It's not for me,it's for BLAQJAQ.Does anyone have the pin-out for the ECU.I am capable of wiring one up,that's what I do for a living.I'm not wasting my money on any of these piggy's because the gains are minimal.
Re: Has anyone wired the e-Manage Ultimate (kevera)
Posted: Thu Oct 18, 2007 10:31 am
by mac99d
It is done. My car now has a turbo, and Yes I have some pic’s of the ECU pin out
Posted: Thu Oct 18, 2007 12:53 pm
by coldmm803
congrats on the turbo, how about some vids of it
Re: (coldmm803)
Posted: Thu Oct 18, 2007 8:15 pm
by Raven
Or a couple of pics of the engine. What turbo setup are you using?
Re: (Sunny)
Posted: Fri Oct 19, 2007 12:11 am
by mac99d
Don't have a Vid camera, but as soon as I can upload my pics I will share them. It Really sucks because I leave for Iraq next week. I was working really hard just to get it running before I left, and I almost lost hope when it was not running right. It ended up being my mistake, on injector one I had it on the wrong channel Blue /red not light blue red. now I just need to put a few miles on my new clutch it is a center force duel friction. So any ideas on where else I can up load my pics photobucket is taking forever. I will up load on matrix owners too.
Re: (mac99d)
Posted: Fri Oct 19, 2007 2:19 am
by drunkenmaxx
i use imagecave.com, it seems to work much faster than photobucket.
Re: (drunkenmaxx)
Posted: Fri Oct 19, 2007 3:24 am
by BlueCrush
Look forward to seeing pics of the Turbo. I'm assuming it is a Turbo-Kit's set-up? If so, you should be pushing 250+/- whp on your Vibe GT. Nice!!!
Re: (BlueCrush)
Posted: Fri Oct 19, 2007 6:57 am
by mac99d
here we go, the wiring