Page 1 of 1
2004 Vibe GT premium radio harnesses
Posted: Sun Dec 31, 2006 8:52 am
by smoozdog
Can anyone tell me exactly what the other wiring harness goes to (not the 24-pin) with the premium (Moon and Tunes) head unit? I am assuming it goes to a separate amp(?). If anyone has wiring schematics on this, please post them. Thanks
Attached files stereo.pdf (204.8 KB)
Posted: Sun Dec 31, 2006 9:12 am
by Jahntassa
It's the amplifier turn-on wire. It should only have one wire on the plug. You need to put 12v to that to turn on the M&T amplifier.
Posted: Sun Dec 31, 2006 9:17 am
by ragingfish
Quote, originally posted by Jahntassa »It's the amplifier turn-on wire. It should only have one wire on the plug. You need to put 12v to that to turn on the M&T amplifier.You sure?In my 03 it was "mute control." Remote amp signal was B3 in the main harness...Quote, originally posted by smoozdog »Can anyone tell me exactly what the other wiring harness goes to (not the 24-pin) with the premium (Moon and Tunes) head unit? I am assuming it goes to a separate amp(?). If anyone has wiring schematics on this, please post them. ThanksThe info you need should be in this thread:
http://forums.genvibe.com/zerothread?id=14275
Re: (ragingfish)
Posted: Sun Dec 31, 2006 10:18 am
by smoozdog
Ok, thanks guys for the replies. It's not something I need (if driving the speakers from an aftermarket deck) then. Now I need to find some 4ohm speakers to compliment it. I attached the pics I took anyways. Thanks again.
Attached files
Re: (smoozdog)
Posted: Sun Dec 31, 2006 10:21 am
by smoozdog
Oh yeah, do any of you guys know where this amp is located? Thanks
Posted: Sun Dec 31, 2006 10:31 am
by cruzin
Under the front passenger seat
Re: (ragingfish)
Posted: Sun Dec 31, 2006 1:56 pm
by Jahntassa
Quote, originally posted by ragingfish »You sure?Nope. That was an off-the-cuff post.