GenVibe - Community for Pontiac Vibe Enthusiasts

Posted: **Thu Nov 02, 2006 4:50 am**

hello all. Im Donavan and i just joined yesterday. I have had an 04 pontiac vibe base/auto since april 05. had 8k miles on it when i got it for 13k. now it has 66k miles on it and no problems so far other than an o2 sensor and the driver side window issue which apparently both are common around here. so far it has hankook k104 205/55/16 tires, EBC slotted rotors and green stuff pads, vibrant strut bar, ARE stage 2 Short Ram intake, ngk iridium plugs at 40k miles, full synthetic fluids, custom exhaust from the cat back with the resonators removed and a silverline canister. future plans include Unichip, underdrive pulleys, dc sports header, magnaflow cat, hks shattered earth grounding kit, 17" drag dr17 wheels with 225/45/17 falken 452's. eibach pro kit coils and tien struts, and a progress rear sway bar.

Posted: **Thu Nov 02, 2006 4:55 am**

Welcome to the forum! Do you have any pictures? I'd love to have half the stuff you have on your mod list. If I where you I'd move the Progress rear sway bar up the list away (to next if possible). It makes such a positive difference when cornering.

Posted: **Thu Nov 02, 2006 5:00 am**

yeah the underdrive pulleys and the progress rear sway bar are the next mods on my list because i can get them both so cheap and they shouldnt be too hard to install.

Posted: **Thu Nov 02, 2006 5:04 am**

PICS!!!!you're doing everything backwards. You're supposed to join genvibe then do all the mods Welcome to the site

Posted: **Thu Nov 02, 2006 5:08 am**

Welcome to GenVibe!Can't wait to see pics...gotta be one of the cooler-looking Kentucky Vibes out there.

Posted: **Thu Nov 02, 2006 5:12 am**

i would love to hear a sound clip of that. i have never heard a vibe w/a cannister on it. forgive me for asking but is it a "fart can"?

Posted: **Thu Nov 02, 2006 5:22 am**

actually no i originally had a flowmaster 40 series on it before i cut the resonators off and put new piping on. when i done that it sounded horrible with the flowmaster, ie tinney, rattled and sounded like crap. now with the silverline it has a real deep tone down low and a nice bark above about 4k rpm. the only issue i have is occasionally when it is cold the exhuat gets a bit of a tinny echo not much but after about five minutes its fine. Ill Get PICS soon and hopefully a sound clip if i can find someway to capture it.

Posted: **Thu Nov 02, 2006 5:24 am**

also until i found this place the other day i had such a hard time finding parts and getting advice on what and how to go about things this place is a godsend. thanks all

Posted: **Thu Nov 02, 2006 5:31 am**

and now you found us... so this sites kinda like a therapy session too... so well need a introductory payment. then you will recieve statements of what we charge... you just send the check to me! This site has lots of info and humor.. and everything in between

Posted: **Thu Nov 02, 2006 5:55 am**

Welcome! Can't wait for some pics!

Posted: **Thu Nov 02, 2006 9:52 am**

yes Welcome to the site! man what a mod list you have! the mod bug really bit you good. lolwe all cant wait to see pics of this master piece of yours

Posted: **Thu Nov 02, 2006 9:59 am**

Welcome to GenVibe! Nice mod list! Can't wait to see some pics.

Posted: **Thu Nov 02, 2006 10:50 am**

welcome to the site!

Posted: **Thu Nov 02, 2006 1:04 pm**

welcome. now all you need to do with that mod list is add a s/c or turbo! LOL

Posted: **Thu Nov 02, 2006 1:53 pm**

this site will help you more than you possibly know...welcome

Posted: **Thu Nov 02, 2006 4:01 pm**

Welcome Donovan!

Posted: **Thu Nov 02, 2006 4:31 pm**

welcome to the fam... how much did the new exhaust cost you?? i'm wondering how the flowmaster sounds, do you still have yours??

Posted: **Fri Nov 03, 2006 12:45 am**

well i already had the new silverline canister laying around that i had traded a set of sub boxes out of my truck for. but the 2.25 inch piping from the cat back, cutting the resonators off and welding the canister on run me about 95 bucks. the flowmaster sounds great if you leave the stock resonator on, but when i cut those off man it sounded horrible.

Posted: **Fri Nov 03, 2006 12:46 am**

and yes i still have the flowmaster even have the magnaflow tip i had welded on it still. the tip looks good the flowmaster looks ok it mainly just needs cleaning.

Posted: **Fri Nov 03, 2006 7:57 am**

welcome, welcome, welcome!!!!!!!!!!!!!!!!!!!!!!!!!!!

Posted: **Fri Nov 03, 2006 11:59 pm**

Welcome to the familia (family In Spanish).... nuvibe

Posted: **Sat Nov 04, 2006 12:07 am**

Oh Si Mi Primo( thats spainsh for cousin).... lol sorry lived in florida for way too long and hang out at the local mexican resturaunt too much. any way thanks all im really happy ive found this place and im loving it here already

Posted: **Sat Nov 04, 2006 12:52 am**

Welcome to the joint. later

Posted: **Sat Nov 04, 2006 1:49 am**

Quote, originally posted by jpalmer Â»this site will help you more than you possibly know...welcomeor destroy loluh I mean Welcome!

Posted: **Mon Nov 06, 2006 12:32 am**

Welcome!

Posted: **Mon Nov 06, 2006 2:08 am**

Welcome to the site!

Posted: **Mon Nov 06, 2006 5:03 am**

hi hi hi... welcome & all that happy horse stuff!glad ya found us!

GenVibe - Community for Pontiac Vibe Enthusiasts

New Member

New Member

Re: New Member (1fstramand1slovibe)

Re: New Member (Jeremy96gase)

Re: New Member (1fstramand1slovibe)

Re: New Member (1fstramand1slovibe)

Re: New Member (1fstramand1slovibe)

Re: New Member (drunkenmaxx)

Re: New Member (1fstramand1slovibe)

Re: New Member (1fstramand1slovibe)

Re: New Member (Mrizzle05)

Re: New Member (ajflan)

Re: New Member (1fstramand1slovibe)

Re: New Member (1fstramand1slovibe)

Re: (jpalmer)

Re: (MRCN RCE)

Re: (1fstramand1slovibe)

Re: (1fstramand1slovibe)

Re: (nuvibe)

Re: (1fstramand1slovibe)

Re: (jpalmer)

Re: New Member (1fstramand1slovibe)

Re: New Member (1fstramand1slovibe)

Re: New Member (1fstramand1slovibe)