Page 1 of 1

Unichip GB on MO

Posted: Thu Sep 21, 2006 3:41 am
by Never Enough
Hey guys...we're working on putting together a GB for the Unichip. Figured we'd put it past you guys as well if you're interested.http://matrixowners.com/forums...20066

Posted: Thu Sep 21, 2006 3:56 am
by meistees
I'm interested

Re: (meistees)

Posted: Thu Sep 21, 2006 4:11 am
by Mrizzle05
How much would it knock off. and do they have one for the 05 years?

Re: Unichip GB on MO (Never Enough)

Posted: Thu Sep 21, 2006 10:16 am
by Legros
All right... Here i go too.

Posted: Thu Sep 21, 2006 10:28 am
by northvibe
Quote »Pricing:UC1020011 - Matrix XR, Corolla, and Vibe $490 + s/hUC1020015 - Matrix XRS, Vibe GT $490 + s/hShipping would be roughly $10 in the lower 48 states. Probably $12 to Hawaii, and $15 to Canada.The pricing is based on four units. If more are needed, the price may drop by a couple dollars.These will come to me....be loaded with the MAP that best suits your vehicle....then shipped off to you. Keep in mind I can only do so much with these without having your car on a dyno so it can be Tuned. What I will be able to do is load them with preset MAPs sent to me by Unichip for items such as intakes and exhaust. Much beyond that you'll want to have a Unichip Tuner tweek it to work best with your vehicle.If there is anyone interested in the one for the Supercharger let me know and I can get pricing right away.Sorry this took so long...paperwork has been on my desk for a week now....really busy. (thank you ) thats from Never Enough on MO

Re: (northvibe)

Posted: Thu Sep 21, 2006 10:39 am
by Mrizzle05
ok but still, is there one for the DBW?

Re: (Mrizzle05)

Posted: Thu Sep 21, 2006 10:43 am
by BlueCrush
Not PnP. It would have to be hard wired for DBW.

Re: (BlueCrush)

Posted: Thu Sep 21, 2006 10:54 am
by Mrizzle05
meaning??? Would have to take it apart and wire it to the correct wires on the ecu?Are they coming out with ours soon... i mean our DBWs been out for a while

Re: Unichip GB on MO (Never Enough)

Posted: Thu Sep 21, 2006 11:05 am
by CAN-AWD-VIBE
I might as well get it while the deals are good,Chalk me up for one too Brad!!!!thanks,CAN-AWD-VIBE

Re: (Mrizzle05)

Posted: Thu Sep 21, 2006 12:12 pm
by BlueCrush
Quote, originally posted by Mrizzle05 »meaning??? Would have to take it apart and wire it to the correct wires on the ecu?Are they coming out with ours soon... i mean our DBWs been out for a whileCorrect. I asked them about it this past spring and they said they were not due to the low demand. But if enough people get them thru brad they might take another look at it. Also if more people e-mail them requesting it as well.

Re: (BlueCrush)

Posted: Thu Sep 21, 2006 12:25 pm
by tcam
I still think the Camcom is a better deal, but thanks for the offer Brad

Posted: Thu Sep 21, 2006 12:32 pm
by northvibe
I thought camcon was for tuning VVT only?

Re: (northvibe)

Posted: Thu Sep 21, 2006 12:40 pm
by BlueCrush
Camcon tunes Intake Cam Timing(VVT-i) and A/F ratio only.

Re: (BlueCrush)

Posted: Thu Sep 21, 2006 12:44 pm
by northvibe
Quote, originally posted by BlueCrush »Camcon tunes Intake Cam Timing(VVT-i) and A/F ratio only.Ah yea thats what i thought, the unichip is a full ecu piggy back so it tunes all the stuff making it much more robust and a full tune. camcon though, on the up side can be (removed) tuned on the street with a laptop.

Re: (northvibe)

Posted: Thu Sep 21, 2006 12:50 pm
by BlueCrush
Correct. If you have an authorized Unichip tuner in your area you can have them tune the Unichip for VVT-i as well just like the Camcon.This is an awesome price, people! If you were planning on getting one of these, now is the time!

Re: (BlueCrush)

Posted: Thu Sep 21, 2006 3:52 pm
by tcam
what? so it (camcon) can or can't be used for VVTL-I? I don't see why it would only work for VVT-I's

Re: (tcam)

Posted: Thu Sep 21, 2006 4:02 pm
by BlueCrush
This thread is not about the Camcon so I PM'ed you.

Re: Unichip GB on MO (Never Enough)

Posted: Sat Sep 23, 2006 6:40 am
by CAN-AWD-VIBE
Im still in but now I have a question.The price is $490 programmed right? Why would the the price different for the supercharger? Isn't it just another program for the Unichip... just another map. I wanted to get this pre-programmed for the SC and my other mods and I would install it when I get it all together.CAN-AWD-VIBE

Re: Unichip GB on MO (CAN-AWD-VIBE)

Posted: Sat Sep 23, 2006 6:43 am
by CAN-AWD-VIBE
reading that MO post again, maybe Brad will only have the map for basic mods and the sc is beyond that.CAN-AWD-VIBE

Re: Unichip GB on MO (CAN-AWD-VIBE)

Posted: Sat Sep 23, 2006 6:51 am
by BlueCrush
The S/Ced version has an additional harness for the 5th injector.He will be able to get the S/Ced version from Unichip as well. They will be able program it for 7.5psi, 10psi or 12psi.

Re: Unichip GB on MO (BlueCrush)

Posted: Sat Sep 23, 2006 6:56 am
by CAN-AWD-VIBE
ahhhh... good call Does that mean I can cancel out the TRD ECU with the SC kit?CAN-AWD VIBE

Re: Unichip GB on MO (CAN-AWD-VIBE)

Posted: Sat Sep 23, 2006 8:28 am
by BlueCrush
Quote, originally posted by CAN-AWD-VIBE »ahhhh... good call Does that mean I can cancel out the TRD ECU with the SC kit?CAN-AWD VIBECorrect! You would not need the TRD S/C ECU Install kit.

Re: Unichip GB on MO (BlueCrush)

Posted: Sat Sep 23, 2006 9:20 am
by CAN-AWD-VIBE
excellent (Mr. Burns style) thanks once again BCCAN-AWD-VIBE

Posted: Mon Sep 25, 2006 11:38 am
by meistees
BUMP - I think we need one more person

Posted: Mon Sep 25, 2006 12:08 pm
by Never Enough
Its a go. I'll get working on getting the GB going tomorrow. Stay tuned. Thanks again!

Re: (Never Enough)

Posted: Tue Sep 26, 2006 2:50 am
by Never Enough

Posted: Wed Sep 27, 2006 11:16 pm
by Never Enough
Group Buy is up guys.....

Re: (Never Enough)

Posted: Thu Sep 28, 2006 7:39 am
by CAN-AWD-VIBE
I gots mineThanks Brad,CAN-AWD-VIBE

Re: (Never Enough)

Posted: Thu Sep 28, 2006 8:18 am
by vibegtcouple
i have a ???? is there anyone that have seen a diffent in there time at the track and on the dyno i 'm tinking about it but i would like to turbo or nitours my gt but it is hard to come up with what i would like to do but if i could get close to 250-300 hp i will go for it ,or can i mix the unchip with the others or go with a diffent program

Re: (CAN-AWD-VIBE)

Posted: Fri Sep 29, 2006 3:54 am
by meistees
Quote, originally posted by CAN-AWD-VIBE »I gots mineThanks Brad,same here thanks man!

Re: (Never Enough)

Posted: Mon Oct 02, 2006 12:42 am
by m4VibeGT
Took the plunge and ordered one today. With the unichip, I can reinstall my TRD CAI and not have to worry about CEL.If anyone is interested, I will a used Injen Cold Air Intake #RD2075 with a brand new air filter for sale soon.

Posted: Mon Oct 02, 2006 4:33 am
by Que
Just ordered mine 10 mins. ago. Looking forward to this mod...

Posted: Mon Oct 02, 2006 4:39 am
by Never Enough
Thanks again guys!

Posted: Tue Oct 24, 2006 6:52 am
by Never Enough
Shipping tomorrow morning. All programmed and all set. We have one left for the Vibe GT if anyone wants it at the GB price.....

Posted: Fri Oct 27, 2006 3:54 pm
by meistees
my unichip came today.. the install only took about 20 minutes.. I can definitely feel a difference engine doesnt hesitate and shifts a lot smoother

Posted: Sat Oct 28, 2006 3:19 am
by Never Enough
Glad you're happy with it. Thanks again!

Re: (Never Enough)

Posted: Mon Nov 27, 2006 8:53 pm
by Que
Just installed the Unichip after a few hours of headache. Apparently Unichip sent the unit out for my GT configured wrong. The PNP harness has a connector that is shrink wraped that would normally attach to the wiring for the base Vibe's w/ the SC. Well, in that connector there are blue and yellow wires that should have a jumper connecting them to each other. Mine didn't have it. Those wires are what senses the MAF and it was throwing a CEL and sputtering above 2.5k's. I called Never Enough and spoke to Brad. He in turn called Unichip for me and then they contacted me directly. What I ended up having to do was to splice the yellow and blue wires to connect them to each other. Brad at Never Enough offered to ship to me an extra unit he had in stock if Unichip couldn't fix the problem over the phone. Needless to say it did get resolved and the car runs great. But I want to give props to Brad at Never Enough for going the extra mile for customer satisfaction. I will be a returning customer. From the looks of it this is a known issue. The tech at Unichip knew right away what the problem was and how to resolve it. So this might be a re-occuring problem for future Unichip owners w/ a GT model.