Page 1 of 1
Removing door trim?
Posted: Thu Jun 01, 2006 7:12 am
by Petrucci914
Hello,The trim that is on my door (that is supposed to protect the car if a door bangs into it) is all scratched up. Can I remove all this trim off the car and have it look much sleeker? Is it only held on by adhesive or is there some holes behind it? Thanks!
Re: Removing door trim? (Petrucci914)
Posted: Thu Jun 01, 2006 7:26 am
by GrayFox
I think it's tape and clips
Re: Removing door trim? (Petrucci914)
Posted: Thu Jun 01, 2006 11:45 am
by Toasted7
It is held on by glue/tape and clips... there are holes behind it, so I wouldn't suggest taking it off.
Re: Removing door trim? (Toasted7)
Posted: Mon Feb 04, 2008 9:00 am
by Sh@dow!
Trim removed and yes it has holes under the trim.
Attached files
Posted: Mon Feb 04, 2008 9:16 am
by WaveAction
it shouldnt have holes under..it's just held on by double sided tape..just like the emblemshere's one guy who just did hishttp://forums.genvibe.com/zerothread?id=31880
Re: Removing door trim? (Sh@dow!)
Posted: Tue Feb 05, 2008 7:42 am
by damronjr
Quote, originally posted by Sh@dow! »Trim removed and yes it has holes under the trim.Damn, that looks awesome! Now I def. want to do that!
Posted: Tue Feb 05, 2008 11:10 pm
by engineertwin2
Wave, he actually found holes behind the door. The determination was that the front doors had the holes, the rear holes did not.
Posted: Wed Feb 06, 2008 7:20 am
by WaveAction
ohh gotcha, is all the vibes like this? or just the older ones? 03/04?
Posted: Thu Feb 07, 2008 9:36 am
by viber05
my 05 has holes in the front doors. and i didnt relize it until i sawed it all the way off. so i had to heat the glue back up and put it back on.
Posted: Thu Feb 07, 2008 10:05 am
by WaveAction
wonder why they'd drilled in on the front doors, but double sided taped on the backs..you'd think they would just use double sided tape for both the front and the back doors
Posted: Thu Feb 07, 2008 10:17 am
by engineertwin2
They probably have them there just for locating the trim. The back one is located based on the front position, but the pin holes (and pins in the trim) locate the specific location it belongs.
Posted: Thu Feb 07, 2008 10:43 am
by WaveAction
yea i "guess" that makes sense...lol..good thing im not taking them off
Posted: Thu Feb 07, 2008 10:37 pm
by lovemyraffe
I'm glad I didn't take these off yet, and now probably won't.