GenVibe - Community for Pontiac Vibe Enthusiasts

Here are some pics check out my cardomain page to see more pics and specs.http://www.cardomain.com/ride/2290660

Good looking GT, How many horses did the headers add?

Quote, originally posted by 4X4CHICHI »Good looking GT, How many horses did the headers add?Gains from headers on a GT are very very minimal, if any. Nice GT though!

Well with the header, CAI, and exhaust I gained 15HP.

The header added about 4.4HP

Nice clean look. Where did you get the shift knob?

Got it off of ebay. Its the MOMO Air Leather shift knob. My car domain page has been updated hope that you all can stop by and see more pics if it does not show up the first time you click on the link click the refresh button and it should load.

I really like those rims. Not too often do you see colored wheels besides your basic gunmetal, aluminum, and chrome

Quote, originally posted by dallarosaj »The header added about 4.4HPI don't mean to be pessimistic, but I'd like to see a dyno. It's been said the 2zz header is as optimized as one can be.Quote »I really like those rims. Not too often do you see colored wheels besides your basic gunmetal, aluminum, and chrome I Agree, those rims are sweet

You asked for it here is the DYNO results of the Vibe GT the mods for this was the Magnaflow Catback Exhaust, Injen CAI, and DC Sport header. It gained 15 HP over what the Stock Dyno was if you want to see stock Dyno for the GT I have that as well.

Thanks dallarosa, but I was refering to a dyno on just the header, like one from the manufacturer. NIce gains though

I should get a dyno on my car just so I can see how slow I am My school just got one I dunno if it's set up yet.

I hate you all. I tried so hard to find a GT vibe. never even seen one. i counted 25 vibes today including ones going down the road and at a dealer. the dealer had 10 vibes, no gt's and no manual trannys either. just spoilers, 17" wheels and gm cround effects. all 10 of them had the same setup. Oh well, i will just stick with the bse until I get it paid down and trade it for a gt or a wrx.

I will send you the articles about the Vibe Gt. Neverenuf had an article done on a 03 Vibe GT, with the Magnaflow Exhaust and KN Air Intake and did not produce that much HP. I will send you the article on it either today or tomorrow.

they are few and far between. I think I';ve seen more AWDs than GTs.

love those rims.

Nice looking Vibe! But, I have to disagree with you on this:Quote, originally posted by dallarosaj »I will send you the articles about the Vibe Gt. Neverenuf had an article done on a 03 Vibe GT, with the Magnaflow Exhaust and KN Air Intake and did not produce that much HP. I will send you the article on it either today or tomorrow.Well...I have an `03 GT, and in the article I wrote for S3 magazine with just the K&N short ram intake and the Magnaflow exhaust, in 4th gear we achieved a 19.53 hp increase, and a 12.51-ft/lbs increase in torque to the wheels! (see link to article and dyno charts: http://www.speed-society.com/f...2.php )From what I've heard, adding the headers, you lose about 4-to-5hp and almost 6-ft/lbs of torque on the 2zz GT engine!

throw in a unichip or ECM management to tie it all together for the best gains. well worth the money imo if you've already spent that much on the H/I/E combo.

Hey everyone its time to finish the system in my car. In the next few weeks I will have my system complete. I will post pics when its finished.

nice car! cant wait to see more pics

man i cant wait to see the system setup

Great looking car ! Its good to see there are at least 2 GT's in our state

Car is going to the shop a week from this friday and will be finished in about 2 weeks.

Ok here is some up dated pics of the Sound detner that I put in the car. It starts from the front of the rear seats and goes all the way to the hatch up to the head liner to took about 75 sq ft or so also I put about 4 layers in the hatch lid and that weight about 6 extra pounds. Here are the pics that I have now the car is going in the shop tomorrow and will post pic at a later date.BEFORE PICAFTER

My car domain page has been updated hope that you all can stop by and see more pics if it does not show up the first time you click on the link click the refresh button and it should load. 1 more week and the system should be done.

Nice Vibe

Well everyone I got the car back yesterday from the shop and I have to say the System is KICK $*@. Sounds great and looks SWEET I will post pic in a few.

Here are the pics. Sorry that there is a reflection but its kinda of bright out side also at night there are red neons that light up the system and when the car is on it baby blue (lights on cap) and red in the back. The doors have all the same speakers just set up differently in the rear. Hope that you all like the pics. let me know what you think.

WOW!!!!!!!! that looks tight!. man that is a sweet setup ypu have i really like it. wait... im mean i LOVE it!! lol. i really cant wait to see this at the South Central meet.

nascar where are those purple faces with the jaw dropping... i need some.That set up is gorgeous... i love how your had the vibe and symbol put on the fiberglass.

great job!

That has to be one of the finest rear enclosures I've seen in any Vibe or Matrix. Awesome work!So, who did the custom fabrication?

hey mike is this what you were looking for?? and this is what i did first when i saw this setup: then this is what did after i put my jaw back in place: Dallarosaj what is on the top cap right behind the rear seats??

That is an awesome set up! Nice Vibe!

The person that did the work is Bear Jones works at Mobile Radio in Silverdale WA.

It has the Kicker logo at each end and has Kickers moto "LIVIN LOUD" in the middle.

nice that is very awsome work and craftsmanship done by them i love it!!!

so how much does the dynomat or w/e really help...... I was thinking about putting it in but never have

I was hitting 140db with one sub in the car but I also had about 75sq ft in the hatch.

So what exactly are those other port holes that look like fish tanks with resistors and wires instead of fish on the doors?

I think you talking about the capasator and ummm i forgot the name of the wiring (big brain fart ) well if anyone knows the name please tell him anyways its pretty much a mini battery that turns a small amount of power to reasonably large size so that you dont burn out your car battery if im wrong please someone correct me i've been getting some crazy brain farts lately lol

"So what exactly are those other port holes that look like fish tanks with resistors and wires instead of fish on the doors?"That would be the crossovers

oooh sweet. I think when I got my tweeters people tried to tell me I needed those but I bought a set of bass blockers for $10 and they worked perfectly. What exactly do they do?

You ae able to fine tune your system to where you have no base comming through or you can have bass go through. Wtih crossovers the sky is the limit

lol yea but only if you know how to properly tune the crossover lol and while it isn't rocket science.... quite a few people can't figure out how to do it