GenVibe - Community for Pontiac Vibe Enthusiasts

does anyone here have a E-Manage. I want to know what will add more power, the E-Manaage, SAFC II, or the camcon. and also which one last longer without being interupted by stock ecu settings.

SAFC will not work it get overridden by the stock ECU. Camcon is still in testing on MatrixOwners with good results so far. I have an e-Manage that I was trying to install with an AutoSportWiring harness and the directions are crap. After trying many different wiring configurations I gave up and sent it down to Black_TRD it Puero Rico to take a look at it since he has that set-up on his Matrix.The three that will work fo far on the Vibe and Matrix are: Unichip, e-Manage and Camcon. Unichip and e-Manage control just about everything except the rev limiter and VVT. They control the three major things that are needed to get more out of our engines: A/F ratio, Injector Duty, Ignition Timing. The Camcon only controls that A/F ratio and VVT. But it may be possible to use the e-Manage with the Camcon to control everything.I also, sent my e-Manage that I bought off e-bay to Matt @ MWR to get a N/A tune. They do offer a N/A tuned e-Manage set-up for $369.Unichip does the same thing but need to be tuned but them adn it costs around $775.I will hopefully have my wiring harness back next week and then re-install my e-Manage.

great response. I will probably get the e-manage in due time and will go with the camcom for now. just post a how to if you can on the emanage. I dont want problems like you had.