GenVibe - Community for Pontiac Vibe Enthusiasts

Well I installed my Jensen VM9510 today. It was easy to install and the whole thing cost me about $700. It is really nice and I would recommend this unit.I bought it here:http://cgi.ebay.com/ws/eBayISA...47&rd= 1&ssPageName=WDVWAnd I bought these at Circuit City:Wiring harness: Metra 80-2003 Antenna Adaptor: Metra 40-GM10Dash kit: Metra 99-8205I followed the info from this post about the antenna:http://forums.genvibe.com/zerothread?id=5952And I followed the thread about the M&T amp where you connect the blue wire with the white stripe to the black wire at the B3 pin, but that didn't give me volume. But, when I connected the HU blue power antenna wire to the blue wire with the white stripe in the Metra connector it worked. As talked about here:http://forums.genvibe.com/zerothread?id=2631I ran the tv tuner antenna up the a pillar on the passenger side and mounted one side across the top of the windshield and the other side down the a pillar. Thanks for the help and the recommendation from Jahntassa, the VM9510 has an awesome picture and the tv tuner works well.

Attached files

very cool. and well done do it yourself install!

Quote, originally posted by tiger-bailey »I followed the info from this post about the antenna:http://forums.genvibe.com/zerothread?id=5952I'm going to try to wire the antenna amp when i get home. MY FM reception went to absolute crap when i installed my new H.U. (VM9410), i was thinking my new antenna adapter was bad, but hopefully it's just that wire. Thanks for the info