Page 1 of 1

17" wheels and drums brakes

Posted: Sun Jun 26, 2005 2:58 am
by jeffgtx
anybody have 17" with a fairly big visible area showing the drum brakes?does it look ok?

Posted: Thu Jun 30, 2005 12:55 pm
by jbrown
hey it looks better than not having 17s

Re: (jbrown)

Posted: Fri Jul 01, 2005 8:00 am
by 4X4CHICHI
I think it looks okay. if you don't mind rusty disks. I painted my hubs of my disks and my calipers. it looks a lot better. check out mt cardomain site

Re: (4X4CHICHI)

Posted: Fri Jul 01, 2005 10:00 am
by redlava
If it were me, I would put a coat of black paint over them just so they wont stand out too much. That way all of the focus is on the wheel and not the drum.

Re: 17" wheels and drums brakes (jeffgtx)

Posted: Fri Aug 12, 2005 10:25 am
by harryyiii
See for yourself. I would have much preferred disks in the rear, but I can always swap rear brakes later. The disk conversion is more than the wheels and tires. ($720 from edgeracing.com)

Attached files

Re: 17" wheels and drums brakes (harryyiii)

Posted: Fri Aug 12, 2005 11:02 am
by redlava
Or if you are really worried about it then you could get those fake bolt on disc brakes that I see occasionally. Unfortunatly I can't locate a website that sells them so we can't all laugh.

Re: 17" wheels and drums brakes (redlava)

Posted: Fri Aug 12, 2005 12:32 pm
by BOZACK
I have the stock 17's with the rear drums. It looks ok but I do like the look of disks better. I plan to paint mine either black or silver that will match the rims. That is when my shoulder gets better.

Re: 17" wheels and drums brakes (harryyiii)

Posted: Fri Aug 12, 2005 12:50 pm
by jeffgtx
thank you for that pic. i take it you painted your drums black? how? what did you use?good looking wheels though!

Posted: Fri Aug 12, 2005 1:12 pm
by rlfreese
the drums come black, or at least my o5 drums are black. i am going to do the rear disk conversion soon.

Re: (rlfreese)

Posted: Tue Sep 06, 2005 9:45 pm
by McVibe
I was looking into rear disc conversion, does anyone know how much it would cost? I'd assume it would be very expensive, considering you have to run all of the lines and stuff for the calipers.

Re: 17" wheels and drums brakes (jeffgtx)

Posted: Tue Jan 17, 2006 1:56 am
by vibedrvr04
I do. I must say i'm deffinately not happy with how it looks. Would much rather see disc brakes back there. SSBC (www.ssbrakes.com) has a conversion kit to convert the drums to single piston/sloted rotor disc, but it'll run ya almost 800 bucks...not to mention the fact that you have to get a SSBC front kit to go with it (2 piston caliper/sloted rotor). and THAT will set ya back almost 850 bucks. I thought about painting the drum black...but it's still gonnna be visible.

Posted: Tue Jan 17, 2006 11:20 am
by meistees
i painted my drums black with a caliper paint kit they dont look bad through the 17's

Re: (jbrown)

Posted: Wed Jan 18, 2006 1:23 am
by Mavrik
Quote, originally posted by jbrown »hey it looks better than not having 17sagreed. Paint your drums... I painted mine black. This spring I'll have to take them off and paint them again. I also painted my calipers though I feel they probably need touched up again as well.