Page 1 of 1
JET V-Force Power Control Modules
Posted: Thu Jan 20, 2005 9:39 am
by Raven
Anybody know if these will work on a Vibe or are they only a Matrix thing like everything else in this world.
http://store.summitracing.com/...&y=11
Re: JET V-Force Power Control Modules (Sunny)
Posted: Thu Jan 20, 2005 11:16 am
by MadBill
Bounced this over to the MartixOwners.com guys for their input...
Re: JET V-Force Power Control Modules (Sunny)
Posted: Thu Jan 20, 2005 12:05 pm
by kostby
You probably already tried this, but doing a search the Summit site for 'pontiac vibe' lists only 19 items instead of 22 for the 'toyota matrix', and does NOT include the Jet V-Force PCM...
Posted: Thu Jan 20, 2005 12:36 pm
by DocHolliday
Does it matter if it's not listed for the Vibe, when the Vibe and Matrix have the exact same engine?
Re: (DocHolliday)
Posted: Thu Jan 20, 2005 8:49 pm
by MadBill
I believe there are wiring harness/ECU differences, so a 'plug in' might not. Furthermore, our Matrix cousins don't have any kind words for Jet so far:
http://www.matrixowners.com/fo...88362
Posted: Thu Jan 20, 2005 11:04 pm
by DocHolliday
I saw that thread. I think you'd be better off with either the GReddy eManage or a Unichip.
Re: (DocHolliday)
Posted: Fri Jan 21, 2005 6:33 am
by satur9
the ecus are the same .there was some discusion on it but i believe jack at unichip resolved it but putting his harness on and confirming fitmement for both cars.i saw the jet chip listedfor a vibe somewhere have to find the link.but it will fit if youn want it.