GenVibe - Community for Pontiac Vibe Enthusiasts

Sorry it has taken so long to post back. There have been a lot going on trying to catch up being gone 10 days. Also checking all options on getting the kit into final production.OK we just got pricing on the body kit.$ 750.00 Four piece kit (Front, Rear, Sides)$ 299.00 Fenders$ 175.00 Roof CapsGroup buy pricing will be available for first kits.Group buy pricing will be @ 20% off for any of these pieces$600 Four piece kit$239 Fenders$140 Roof CapsThey should be available in February.This is to be produced by Aerogear and will have a limited lifetime waranty for defects and are some of the best quality available. Sorry this has taken so long, we refuse to deal with junky quality parts and do not want to be associated with poor quality.Here are the pics.Here is a link to more Vibe partshttp://www.street-graffiti.com/VibeParts.htm

that is one of the best and most original vibes out there! i want to give you two big for originality and creativity! but most of all, for NOT DOING and EVO 5 FUGLY KIT!!!!

i second that notion

Great job. Let us know when you start selling the kits

OK we just got some preliminary quotes on the body kit prices.$ 750.00 Four piece kit (Front, Rear, Sides)$ 299.00 Fenders$ 175.00 Roof CapsGroup buy pricing will be available for first kits.Group buy pricing will be @ 20% off for any of these pieces$600 Four piece kit$239 Fenders$140 Roof CapsThey should be available in February.This is to be produced by Aerogear and will have a limited lifetime waranty for defects and are some of the best quality available. Sorry this has taken so long, we refuse to deal with junky quality parts and do not want to be associated with poor quality.Let me know what everyone thinks.

>

Put me down for a set of the roofrails. As soon as they're available, my money order is in the mail!

I'll surely be getting the roof caps and fenders! Let me know when and where to send the $$!

Congrat,many dreams materialise,very eye catching,unreal.

any word yet on if it fits other year models? I will buy all that fits on a 03.

i will also be sending money if it is for the 03 or if it will fit....PLEASE LET IT FIT!!!

so ive been lookin at my car lately and also this bodykit.and the only real difference that i can c is the grill. but is the whole front bumper of the body kit includes the grill then everything should be alright and fit perfectly. i think this weekend i will switch out my front end with my friends 05' and c that the fit is like..or if it is even possible..but if it is i think we have a match for all.

I'd have to see if you guys made a 03/04 kit. I just dont like those huge grills. The rest of the kit is nice, and the roof caps will work great. (Made it sticky)

Wow, that wins my nomination for Vibe of the YEAR >I WANT that kit...but as everyone else has mentioned, will it fit an '03? I'll even buy the '05 front end to make it fit, if I have to. I love the way the grilles look on this kit!

i believe the front is a whole bumper replacement... not a bad idea and wish this was available last march when i had my accident! almost tempted to get it and claim it on my insurance, then use the money to pay for the kit! LOL.... but still don't want to spend $500 deductible

so i couldnt wait till this weekend so i invited my friend over and we switched out his 05 front end with mine and guess what...WEVE GOT A MATCH....so im thinking that thios kit would definately fitthe 03 models..where can i signmy name for this?!?haha

HAHA good job! Too bad I have two-tone...I want the hood soooooooooo bad!I gues if you want the '05 front end than you've got yourself a body kit.

Quote, originally posted by rcasciola »so i couldnt wait till this weekend so i invited my friend over and we switched out his 05 front end with mine and guess what...WEVE GOT A MATCH....so im thinking that thios kit would definately fitthe 03 models..where can i signmy name for this?!?hahaThat;s awesome! Great job Do, what's the difference besides the grilles? How many parts are different, and does anyone have '05 factory part numbers?

i have a two tone also...but i think i can make some adaptations for this kit...its awesome

Thanks for doing the test fit, I couldn't get anyone where we live to even reply to trying. GM told us it would fit but noone knows for sure till you proved it for us thank you so very much for putting everyone at ease.The only difference in the cars is the front. I think that the two-tone can be done with a little creativity and it shouldn't look too bad.Our kit is Full front Fascia, Full rear bumper. and Both side skirts. The fenders and the roof rack caps.Adding more pics and other things to our site also.Thsnks again.

well like one member in the phillipines (or somewhere like that) converted a mazda 6 kit to the voltz/vibe, i don't see why you couldn't do a little cutting and "pasting" of sorts at a good body shop to keep the 03 front end. that's what i'd probably do... but of course, no can do at this moment of time. it's a real shame too! where were you last summer??? all that would be MINE! that hood, body kit, all of it!!!!! now i'm gonna go cry.... j/k

Sorry for being busy building 5 cars going to SEMA last year, and didn't know of this need then, but hopefully after this kit is back from making molds and final test fit and into production all will be better, (ie Late FEB).

Quote, originally posted by Psychovibe »Sorry for being busy building 5 cars going to SEMA last year, and didn't know of this need then, but hopefully after this kit is back from making molds and final test fit and into production all will be better, (ie Late FEB).ha ha ha! that's NO excuse! j/k

Quote, originally posted by Psychovibe »Thanks for doing the test fit, I couldn't get anyone where we live to even reply to trying. GM told us it would fit but noone knows for sure till you proved it for us thank you so very much for putting everyone at ease.The only difference in the cars is the front. I think that the two-tone can be done with a little creativity and it shouldn't look too bad.Our kit is Full front Fascia, Full rear bumper. and Both side skirts. The fenders and the roof rack caps.Adding more pics and other things to our site also.Thsnks again.So it does NOT include the grilles, correct? How many peices of the front end would I have to pick up from GM? And lastly, does anyone have these part numbers?

Right now keep in mind that it is still too early to worry about running out and getting things. We are looking into how exactly to handle the grill. Ours is factory. However the bumper will be fiberglass and cannot use the factory style mounts for the factory grill. Please be patient and we will figure out what direction will look good as none of us wants anything that looks bad.Sorry for not getting all the bases covered but I built the entire car in 10 weeks by myself without the use of power tools. We are planning to use mesh pieces for the grill to match all the front holes and will have these available when the bumpers are ready.You should not need to buy any parts from GM. This will be a complete replacement for all the parts.

bleh! i wish i could get it... oh well.... maybe after it's all worked out and figured out the following year or something.

Will the bodykits pieces be available separate. If so what would be the price for each componet. By the way, the kit is slamming.

Yes they will be availabe individually. Don't have pricing for that yet will try to get it monday. Thanks

Does the fenders come with the aftermarket fender flare or does the existing fender flare from the factory installs back over the new fender. And will the bodykit be available exclusive though Aerogear only or though you. Thanks in advance.

... .../IMO ... just not feeling it.

We are looking at both ways to see which is better for the fender flares. We are still discussing this with Aerogear and should have a final answer on Monday. The first kits will be available through us only. Later they will be available from either. This is how we can make the group buy possible. They will be shipped directly from Aerogear.Next week we will have the contact info for anyone who questions the validity of this, to verify all of it with Aerogear.

Well I just came from the annual Charlotte International Auto Show and checked out the Pontiac exhibit and looked under the hood of the 05 Vibes and the front bumper mounts looks about the same as the 03 and 04s. The only difference is the grill. So the front bumper should fit. Psychovibe will confirm this for us 03 and 04 owners hopefully. He He !!!

pretty positive the only thing they changed was the "look" of the front bumper and that instead of 2 pieces, it's just one. i'm sure that will also change when the 2 tone 05's come out next spring time (i believe that's the eta)

Those will be interesting looking...god I want that RK hood (removed)

so the kits would come primered not painted right?!?

count me in for a whole set but i have a two tone 04 abyss black vibe so i dont know if you can make a kit work around that, i was also thinking if it was possible to paint the bottom two tone part ? i

dude i have two tone..and im thinking it wont look that bad..and if it does i can either paint em or buy new ones

Ok i came back from an auto body shop around me and they said that they can make some adjustments to make the kit fit but he said some bull **** about making the paint stick to thw two tone part he said he cant gurantee that it will be able to be painted but i want it to be mono tone so bad that i will be willing to take that risk lol

Looks awesome, and I'm definitely down for some roof capsHowever for you guys with the 03-04, you gotta remember that the hood shape is a bit different for the 05's (or at least I'm near positive it is) since the 03-04 hoods have that point in the middle where as the 05's don't so the kit may not fit flush or the hood might not close

For those of you wondering how a 2-tone would look with a ground effects kit, thought you would like to see this.

Dude ur awesome for finding that pic!!! much props out to u!!!

So who made that kit??? That looks awsome as h*ll with the two tone. I though they painted a stripe on the sides, I didnt realize that was the cladding!

I believe I found that pic on the streetforce.ca.com website. Let me check though. Ok, maybe not. I'm not sure where I got that. I just found it this weekend or maybe mid last week. Anywho, no problem. Saw the question and remembered the pic, so thought I would put it out there for you guys.I'll try to see when I get home if I can figure out where it came from. I have it saved on my home comp, so I might be able to figure out what site it came from.Ok, found it. It was on streetforce.ca Look under showroom, news, October 2004 gallery.

Wanted to bump this to show you guys the edit I made to my last msg. Found the origin of the 2-tone Vibe with body kit!

whoa! imo, that is freaking sweeter than the mono!!!

that would look bad @$$ on my abyss two tone

yeah now that i can see it i think it would pretty good on my 04 abyss two tone throw some rims on there and it would look sexy as hell

I agree, I think that kit looks very sweet on a two-tone. Only problem is that the cladding doesn't exactly have a good track record of holding up to the elements (fades and scratches easliy). Although I put "Back to Black" on mine a few times a year to try to keep it looking good, I don't think it would hold up as well as it would on a monotone. I would hate to have to paint that stipe all the way around the car, but it does look pretty sweet.

Sorry for not getting back sooner. Just returned from 3800 miles and over 61 hours in the durango delivering the kit to Aerogear. Left friday and returned late Wed night.This two tone kit appears to be the factory sport package. Just for what it is worth.Our fenders will reuse the factory flares with the factory hardware.The kits will come in the Aerogear premium line in the blue gel coat. Should be Available in Feb.The hood is the same from 03-05.

So will you kit fit on 03-04 vibes?