GenVibe - Community for Pontiac Vibe Enthusiasts

quote: I LOVE this one. How about Accentuating the VIBE portion and making the "gen" and ".com" a little smaller. That way the vibe word and font would clearly show what the point of the site is. It's just a thought, maybe it'd look like crap, but if someone could do a proto, that'd be great!

Can you guys see this?

Attached files

quote:just screwing around Can I get that top one in reflective white?

I agree! cathy likey the 1st one....but in reflective yellow....hehehehe

SilverAWD26 why don't we ask Ryan at Grafxwerks if he could make them, all it would be is a different font. I had him make my "spider" for my vibe and it wasn't that much $10.00 each if I remember. just a suggestion. Ryan if your reading this.....

quote:Ryan if your reading this.....Drop him a line!grafx@grafxwerks.com

Hope to see all propositions on this forum soon. For now look at this one but don't tell me that we're not suppose to use Pontiac properties... I like it so much

Attached files GENVIBE.doc (313.5 KB) 

I guess we know who made THAT shirt design...

quote:just screwing around Ryan will need to know what font these are. I hate polls but maybe we need to find out what every body wants, and isn't it up to the owners of this site to make the final decision on it? but then If you like 1 type drop ryan a line and he will have no problem custom making 1 for you. personally i like the "flinstones" type font it has a fun carefree outside the box appeal to it. not squared off stick to the rules type shown here. just my opinion though.

After I found out what our original logo font was, I emailed Ryan at GrafxWerks and worked with him on creating the decal for our logo. I emailed Ryan about creating another logo yesterday. I have focused on the 1st one but I asked if he could incorporate the way the word Vibe looks on our car into the logo. The font that is used is Impact in italics. Hopefully I will have a final look of the decal and a price today. Keep a watch on this thread!

quote:Ryan will need to know what font these are.Impact Bold Italic (closest to the actual Vibe logo I had)Good times (tks disneydj, looks like Pontiac font)MS Sans serif (for trdvibe)quote: personally i like the "flinstones" type font What's the name of the font used for the current logo?

quote:What's the name of the font used for the current logo?The font used for the current logo is Vitamin.And thanks joatmon for letting me know what font you used for the first logo.

Okay! For those interested in that great idea for a logo that joatmon had, I talked with Ryan and had him put the design of the Vibe badge into the logo and this is what he came up with: They run $6.00 for a pair of solid decals (add $4.00 for reflective vinyl) and $8.00 for the outline pair (also add $4.00 for reflective). They are available at this link: http://www.grafxwerks.com/products/logos.php?part=LOGO1 A big THANK YOU goes to Ryan for taking the time to put these together. Let me know how everyone likes these.

I really like these.

Showing my support....just bought a set!

quote:Showing my support....just bought a set!These are great! I'm buying a set too!

Ordering one after payday

quote:After payday ???they're six bucks... lol Give him a break...he's a broke college student!

>yeah, i'm gonna save up and get me a pack of gum...

does anyone know if the "vibe" part of that icon will be the same size as the current "vibe" badge on our cars?

quote:does anyone know if the "vibe" part of that icon will be the same size as the current "vibe" badge on our cars?No, it is smaller. I can do them so that they are close to the same size, however, the overall decal would be ~15" in length versus the standard 10" length.- RyanGrafxWerks

quote:So, then it will not fit on the cargo window thenRight... unless someone wanted to put the larger one somewhere else. I'm not sure what Raging's intentions were/are.- RyanGrafxWerks

quote:does anyone know if the "vibe" part of that icon will be the same size as the current "vibe" badge on our cars?No, it is smaller. I can do them so that they are close to the same size, however, the overall decal would be ~15" in length versus the standard 10" length.- RyanGrafxWerksHmm...i was thinking if it was the same size, I could but the "gen" and ".com" on opposite sides of the vibe badge...and then I could either overlay the current badge, or just leave it as is...know what I mean?

You could still do that, and then you'd have what St. Martin wanted Does this thread still need to be "sticky"?destickied by someone 10/26/03 - thanks

I like all the letters the same size personally. I want them to fit in the rear windows like the last ones did.

quote:So, then it will not fit on the cargo window thenRight... unless someone wanted to put the larger one somewhere else. I'm not sure what Raging's intentions were/are.- RyanGrafxWerksI want to have a large one for a window banner. 10" will not cut it. 15" still not going to do, i need something around 20" or so. reflective red.

quote:I want to have a large one for a window banner. 10" will not cut it. 15" still not going to do, i need something around 20" or so. reflective red.You can e-mail me for a quote. Most windshield banners are ~35" wide just FYI.- RyanGrafxWerks

Ryan...Would it be possible for me to order a 15" version of the decal specially (to match the size of the current vibe badges)...or is doing a single order of a design more trouble than it's worth? Thanks!

quote:Would it be possible for me to order a 15" version of the decal specially (to match the size of the current vibe badges)...or is doing a single order of a design more trouble than it's worth? Thanks!No, that's no problem, you can e-mail me for a quote.- RyanGrafxWerks

You've got mail!

Yes, I would apply a decal/sticker never knew there was a previous one offered.

quote:all in jest was there once too.Well I am also putting in an order for a bunch of Vibe stuff at the same time so to do it all at once I had to wait till payday Expect pics of everything soon! *giggle*

can anyone suggest a good place to put the new decal?i want it to be visible, but not like on the body of the car.

I have a question. I have bought from this place before. I think its called grafix.com But every time I type the email address, It never comes up! I need to order the overlay reflective decales for my gt emblems! I cant find anything or remember the web site address! If any one can help we really would happy! thanks!

Just ordered my 10" genvibe.com decals from Ryan.....I'm assuming the decals will fit perfectly in rear cargo windows.

quote:Just ordered my 10" genvibe.com decals from Ryan.....I'm assuming the decals will fit perfectly in rear cargo windows.Yes they will. You will be very happy with his products.

Do these stickers go on the inside or the outside of the glass?

quote:Do these stickers go on the inside or the outside of the glass?outside

Just wanted to give a round of applause to Saved for some really good designs for a new logo. The seemed to have been sidelined by some not so slick looking logos which seem to have a larger following. It takes a lot of time and creativity to come up with something distinctive that constitutes more then changing the font of the old logo... so once again thanks for the attempt!

Not bad, like most of the first one, I agree with most everyone else in changing the "dot" to a red dot, maybe even the same height as the rest of the font?Make it large enough to be seen easily, and i'll put one on my "ORANGEN".

http://www.grafxwerks.com/I like the new ones. But I must be a caveman, I like the old one. I just bought it from grafxwerks, stumbled across it when I was buying my vibey his purple reflective overlays and flame thingies. I bought the pewter reflective solid genvibe.com decal. It is just a smidge lighter than my moonstone car, probably a perfect match for a shadow. It just fits on the right upper side above where the windshield washer blade wipes on the back hatch. My "honk if you love clay aiken" decal is on the left side, where there is more room. So I have another pewter one up for grabs for someone who likes the old design. They only sell them in sets. I don't want money. I will even put the 37 cent stamp on it. I just want you to be sure you will really put it on your car. First one to reply gets it. Looks just like the logo up top, except in metallic pewter. 10 inches or so.

maybe interrested,have you a pic?

Go to their website and find the part where they say logos. Look for the genvibe logos. It is the solid one, not the outline one. Or just imagine the genvibe.com logo up top colored metallic platunum. Crooked like that. I think it looks cool.

Just scraped off my charcoal metallic outline style "genvibe.com" decal on the right side of my hatch. Replaced it with a "grafxwerks.com" in charcoal metallic, and added a bright yellow reflective solid new style "Genvibe.com" to the left side of the hatch, and another to the top center of the windshield. Hope the windshield one makes it until the OH meet, but the back ones should be fine. They look awesome, pics to follow.

WOOHOO, I just ordered all my grafixwerks stuff. All reflective black.

That reflective black vinyl is really cool...you'll love it.

I just replaced my Injen and Magnaflow stickers with some of the genvibe.com ones. They are the outlined in the metallic silver. Also orderd the lock overlays in reflective white so I could get the free shipping. They look really nice on there. Too bad my doors are locked most of the time so I hardly ever get to see them.

Nice to know I'm not the only one who drives around with my doors locked all the time...

hey try going to decalzone.com you can chose different fonts and stuff and maybe we can do a group buy from them. they are already cheap so it would be a good choice