Page 2 of 3
Re: Bob's for sale/part pickin' thread
Posted: Sun May 08, 2016 6:02 pm
by M1MECHANIC
Was wondering if you have a center console or just the cup holder in the back for sale
Re: Bob's for sale/part pickin' thread
Posted: Mon May 09, 2016 6:51 am
by NYfan08
KnightmareCS wrote:Reposting this if you come across anything in the yard:
Any of these? For an 05 base FWD.
-Pass side outer rocker panel, non-extended, preferably in abyss.
-Front lower grill ducts.
-Front window switch panel, driver side, with no broken tabs? Don't need the actual switches, just the trim panels.
-Driver side fog light
-Complete roof rail crossbars
Still keeping an eye out for ya!
Re: Bob's for sale/part pickin' thread
Posted: Mon May 09, 2016 6:52 am
by NYfan08
M1MECHANIC wrote:Was wondering if you have a center console or just the cup holder in the back for sale
I can see about the cup holder, as far as the center console, I'm afraid shipping will be too much, but I will check.
Re: Bob's for sale/part pickin' thread
Posted: Mon May 09, 2016 4:07 pm
by KnightmareCS
NYfan08 wrote:KnightmareCS wrote:Reposting this if you come across anything in the yard:
Any of these? For an 05 base FWD.
-Pass side outer rocker panel, non-extended, preferably in abyss.
-Front lower grill ducts.
-Front window switch panel, driver side, with no broken tabs? Don't need the actual switches, just the trim panels.
-Driver side fog light
-Complete roof rail crossbars
Still keeping an eye out for ya!
Thanks!
The hitch has been a little tricky so far. Haven't had a chance to use an arbor press to separate the receiver. The other parts just snapped on nicely.
Got the crossbars from trb on here.
New list by priority:
-Front power window switch panel, driver side, with no broken tabs? Don't need the actual switches, just the trim panels.
-Pass side outer rocker panel, non-extended, preferably in abyss.
-Driver side fog light housing.
-Front lower grill ducts.
Re: Bob's for sale/part pickin' thread
Posted: Tue May 10, 2016 6:22 am
by thebarber
pm'd the OP
Re: Bob's for sale/part pickin' thread
Posted: Wed May 11, 2016 6:07 pm
by NYfan08
Pm replied, Duraflex caps sold! Thanks!
Re: Bob's for sale/part pickin' thread
Posted: Thu May 12, 2016 6:36 pm
by M1MECHANIC
NYfan08 wrote:M1MECHANIC wrote:Was wondering if you have a center console or just the cup holder in the back for sale
I can see about the cup holder, as far as the center console, I'm afraid shipping will be too much, but I will check.
Really just need the cup holder wasn't sure if you would be able to pull it out. My console is just fine only need to replace the rear seat cup holder in it.
Re: Bob's for sale/part pickin' thread
Posted: Wed May 18, 2016 7:52 am
by thebarber
NYfan08 wrote:Pm replied, Duraflex caps sold! Thanks!
PM'd for tracking number if you've got it...
Re: Bob's for sale/part pickin' thread
Posted: Tue May 24, 2016 2:02 am
by NYfan08
No reasonable offer refused!!
Re: Bob's for sale/part pickin' thread
Posted: Fri May 27, 2016 6:07 pm
by NYfan08
Found some more stuff.
Re: Bob's for sale/part pickin' thread
Posted: Mon May 30, 2016 4:14 pm
by NYfan08
Always pickin
Re: Bob's for sale/part pickin' thread
Posted: Mon May 30, 2016 5:23 pm
by BustedVibe
Will those Door Trim (sail panels?) fit on an 04 Vibe?
I could maybe use those in place of messing up my tweeter covers.
Also if you are still able to look for parts, I might be interested in acquiring the door/compartment for the center shifter console for a fair price. The latching tabs on mine came worn out with the car and the damn thing never stays closed. Replacement is like $35!

Re: Bob's for sale/part pickin' thread
Posted: Mon May 30, 2016 5:49 pm
by vibrologist
BustedVibe wrote:Will those Door Trim (sail panels?) fit on an 04 Vibe?
I could maybe use those in place of messing up my tweeter covers.
Also if you are still able to look for parts, I might be interested in acquiring the door/compartment for the center shifter console for a fair price. The latching tabs on mine came worn out with the car and the damn thing never stays closed. Replacement is like $35!

Kitt222 wrote: "
Remove the cubby, and you'll find a little metal tab in the top of the hole. Bend it towards the driver, and it holds the cubby closed a LOT better."
Re: Bob's for sale/part pickin' thread
Posted: Mon May 30, 2016 6:20 pm
by BustedVibe
I'm not sure what is meant by "bend it towards the driver".. To the left side? Either way I tried doing that without feeling like I was gonna break it and nothing really changed.. Tried bending it toward the cabin interior too.
The tab is meant to push on the cubby so when you unlatch it, it pops out.. Not sure how it would hold it closed.
Re: Bob's for sale/part pickin' thread
Posted: Tue May 31, 2016 4:06 am
by NYfan08
They will fit, but not without removing the tweeters. I already have a center door, not pictured here. Pm me your number or email so I can send pics, it's a heck of a lot easier than uploading them here.
Re: Bob's for sale/part pickin' thread
Posted: Tue May 31, 2016 6:26 am
by sweetpete220
BustedVibe, if you remove the entire cubby and look underneath there are 2 little ridges on both sides that sit in indentations near the floor. rip a bunch of small pieces of masking tape or blue painters tape and put about 6 on each of the little ridges. I did this last week and the cubby is fully loaded with stuff and hasn't popped open once. Add more pieces if you need to but 6 on each did it for me.
Sorry for the thread hijack!
Re: Bob's for sale/part pickin' thread
Posted: Wed Jun 01, 2016 3:30 pm
by Water boy
Front license plate holder still available?
Re: Bob's for sale/part pickin' thread
Posted: Fri Jun 03, 2016 1:28 pm
by BustedVibe
I received the door panels and the cubby door today. All in pretty good shape, very satisfied.
It seems the underlip of the center console may be damaged too because the door still pops open easily if it gets josted hard, although it does close properly now.
I will have to try putting some tape around the locking recess on the lip of the console I guess.
Re: Bob's for sale/part pickin' thread
Posted: Wed Jun 08, 2016 6:07 pm
by NYfan08
Make me an offer!
Re: Bob's for sale/part pickin' thread
Posted: Mon Jun 13, 2016 11:30 am
by KRR
NYFan - Two thangs:
Trailer hitch (w or w/out pull bar)?
and
Front left small bumper insert thingamajiggie.
If you run across these, I'm in the market.

Re: Bob's for sale/part pickin' thread
Posted: Mon Jun 13, 2016 1:35 pm
by NYfan08
KRR wrote:NYFan - Two thangs:
Trailer hitch (w or w/out pull bar)?
and
Front left small bumper insert thingamajiggie.
If you run across these, I'm in the market.

Aww man, sold the only trailer hitch I found not too long ago. No luck on the bumper inserts either, most are gone/missing or the front of the car is trashed. Sorry. But I am always keeping my eye out for those types of things.
Re: Bob's for sale/part pickin' thread
Posted: Mon Jun 13, 2016 6:15 pm
by KRR
Hey, no problems! I can get them elsewhere, just wanted to check with you first.

Re: Bob's for sale/part pickin' thread
Posted: Thu Jun 23, 2016 7:30 pm
by Petrus
Looking for wheel covers for 06 vibe. Thanks
Re: Bob's for sale/part pickin' thread
Posted: Fri Jun 24, 2016 4:22 pm
by NYfan08
Petrus wrote:Looking for wheel covers for 06 vibe. Thanks
I have a set, one is damaged though. I would do $25 + shipping for the good 3.

I can check the yard monday for a fourth. Let me know.
Sold
Re: Bob's for sale/part pickin' thread
Posted: Fri Jun 24, 2016 9:40 pm
by Petrus
Yes!!! I'll pm you my address. Lets hold off for the 4th one for now if that is ok with you so all will be shipped together. Paypal? Thanks!!!!
Re: Bob's for sale/part pickin' thread
Posted: Fri Jun 24, 2016 9:43 pm
by Petrus
Need a clock spring and the evap vent solenoid(?) the one on the engine bay. 06 vibe awd. Thanks!!!
Re: Bob's for sale/part pickin' thread
Posted: Thu Jun 30, 2016 8:52 am
by NYfan08
Still taking requests. And all reasonable offers accepted.
Re: Bob's for sale/part pickin' thread
Posted: Thu Jun 30, 2016 12:28 pm
by Petrus
Just want everyone to know, I bought and paid for 3 wheel covers on Monday and got them Thursday. Super fast shipping. Nice price and items are the ones in the photos. Excellent deal!!!
I'll be back.
Thanks Bob!
Re: Bob's for sale/part pickin' thread
Posted: Wed Jul 20, 2016 12:04 pm
by opsmanager1218
I need drivers side end caps front and back,,interested in selling thse to me?thanks
Re: Bob's for sale/part pickin' thread
Posted: Thu Jul 21, 2016 10:11 am
by knewman25
Hi - I am looking for 16" wheel covers for my 2004 Vibe. Looking for bare minimum of one to replace the one that broke, but would love 4 in good condition. Thanks!
Re: Bob's for sale/part pickin' thread
Posted: Fri Jul 22, 2016 4:56 pm
by NYfan08
opsmanager1218 wrote:I need drivers side end caps front and back,,interested in selling thse to me?thanks
Not sure what you are referring to...for the luggage rack? I can see if there are any left at the yard that dont have the retaining clip broken.
Re: Bob's for sale/part pickin' thread
Posted: Fri Jul 22, 2016 4:57 pm
by NYfan08
knewman25 wrote:Hi - I am looking for 16" wheel covers for my 2004 Vibe. Looking for bare minimum of one to replace the one that broke, but would love 4 in good condition. Thanks!
Had some, sold them already. None at the yard. Sorry.
Re: Bob's for sale/part pickin' thread
Posted: Fri Jul 22, 2016 6:23 pm
by NYfan08
SOLD

Re: Bob's for sale/part pickin' thread
Posted: Thu Jul 28, 2016 2:08 pm
by NYfan08
SOLD

Re: Bob's for sale/part pickin' thread
Posted: Thu Jul 28, 2016 7:18 pm
by jennperry571
Ooh, I'm interested in the crossbars if they're still available!
Re: Bob's for sale/part pickin' thread
Posted: Sun Jul 31, 2016 6:40 pm
by NYfan08
Pm's sent and all pm's replied to.
Re: Bob's for sale/part pickin' thread
Posted: Mon Aug 22, 2016 7:20 am
by NYfan08
I would really like this stuff gone, seriously, make an offer...
Re: Bob's for sale/part pickin' thread
Posted: Wed Sep 21, 2016 1:35 pm
by NYfan08
Not for sale any longer

Re: Bob's for sale/part pickin' thread
Posted: Thu Sep 22, 2016 5:26 pm
by Khaj
Do you have the entertainment console? Silver piece that the radio head unit goes into. Also looking for Vibe mats and a driver side front door handle for the outside.
Re: Bob's for sale/part pickin' thread
Posted: Fri Sep 23, 2016 6:09 pm
by NYfan08
I can check for the radio trim when i go to the yard monday. Door handle is no problem. Mats are a no go, most are gone or have been exposed to the elements. I will message you back on monday around 5pm with what I find and a cost. Thanks
Re: Bob's for sale/part pickin' thread
Posted: Fri Sep 23, 2016 6:47 pm
by Khaj
NYfan08 wrote:I can check for the radio trim when i go to the yard monday. Door handle is no problem. Mats are a no go, most are gone or have been exposed to the elements. I will message you back on monday around 5pm with what I find and a cost. Thanks
Thanks! I'm tired of having a broken door handle and radio bezel (I found out what it's called after I posted my request). Have a great weekend
Re: Bob's for sale/part pickin' thread
Posted: Thu Oct 06, 2016 8:55 am
by JMcQ11
Do you happen to have any sail panel tweeter covers? I have an '06. Thanks for your time. I also live in IN for shipping.
Re: Bob's for sale/part pickin' thread
Posted: Fri Oct 07, 2016 6:43 am
by NYfan08
The sail panels arent a problem, I will pm you. I also found at least 3 more vibes near me! So maybe a better selection of parts.
Re: Bob's for sale/part pickin' thread
Posted: Thu Oct 13, 2016 7:53 am
by Khaj
Great seller! Got my radio bezel and door handle wrapped in bubble wrap within a timely manner. Now I just gotta install them. Hurricane in Florida caused delay on my part. Will def come back if more parts needed.
Re: Bob's for sale/part pickin' thread
Posted: Tue Oct 18, 2016 12:50 pm
by msu90
Hey there, I wasn't sure if I already asked, but do you happen to have the antenna base? I think mine died. Thanks!
Re: Bob's for sale/part pickin' thread
Posted: Sat Oct 22, 2016 11:40 am
by NYfan08
So I just picked up a monsoon sub and panel from the yard. The factory plug was removed and it looks like the sub is wired in series, it is a dial voice coil. I will try and get pics on here soon. Let me know.
Re: Bob's for sale/part pickin' thread
Posted: Fri Oct 28, 2016 8:43 am
by NYfan08
Here is the sub and panel. I have all the hardware. Price depends on shipping cost. Just message me if interested.

Re: Bob's for sale/part pickin' thread
Posted: Mon Oct 31, 2016 6:23 am
by BenWA
Do you have an O/D button to fit an 03? I don't care if the wires are cut instead of properly removed from way down below in the shifter assembly, since I'll be splicing/soldering it in up near the top of the shifter anyway to save gobs of time vs pulling the plastic trim, routing the wires, blahblah. As long as there's at least, say 4-6 inches, of wire to work with.
The Chevy dealer that did my airbag recall work almost a year go ripped the wires clean out of the button itself, so I need to replace it.

Since I do city driving mostly it hasn't mattered, but since I plan to travel a bunch, I want the function back for mountain driving.
Replacement ones new are insanely priced, $60+. It's nothing more than a momentary switch, for crying out loud! If I really had to, I could buy a $5 universal one and make it fit someplace, but I'd rather have it fixed right than done as a hack job. I waited too long for local you-pull junk yards, now they have no Matrix or Vibe in stock currently.
Re: Bob's for sale/part pickin' thread
Posted: Mon Oct 31, 2016 10:32 am
by NYfan08
I can get one. What I did is exactly what your 2nd option is. I mounted mine in one of the dash blanks, ran the wires up through the dash. Easy fix. I used the tire switch that came in the tpms system. I have another switch if you wanna go that way. Either way, I can get what you need. I will also get a pic of my switch.
Re: Bob's for sale/part pickin' thread
Posted: Mon Oct 31, 2016 10:37 am
by BenWA
NYfan08 wrote:I can get one. What I did is exactly what your 2nd option is. I mounted mine in one of the dash blanks, ran the wires up through the dash. Easy fix. I used the tire switch that came in the tpms system. I have another switch if you wanna go that way. Either way, I can get what you need. I will also get a pic of my switch.
In that case, I'd have to find where the two wires around the steering column are, or take the center console apart and splice in where the original button connects. The stripped, bare wires in the shifter shaft are still there, just taped off with electrical tape to keep them from contacting each other.
I'd rather just fix it in the original location.