GenVibe - Community for Pontiac Vibe Enthusiasts

Quote, originally posted by kevera »Looks good V,I am just worried about the pontiac logo,I'm not sure we can use a copyrighted logo like that.this is true...

Quote, originally posted by damronjr »I like this idea a lot! I think the Vibes need to be more closely matched as far as size goes, but otherwise, AWESOME! I also like Cole's idea from above with the 2 color designs of the GXP Vibe! that was pretty much a draft i did in about 10 minutes. i plan on improving it with getting the cars the same size, making the gauges look better, and changing the lettering. possibly about something here and there. it should be finished by this weekend.

Quote, originally posted by 02csnow »that was pretty much a draft i did in about 10 minutes. i plan on improving it with getting the cars the same size, making the gauges look better, and changing the lettering. possibly about something here and there. it should be finished by this weekend.Sweet, then it would be awesome!

Is the pontiac emblem on the front of the car not copyrighted, too? I understand the worry but isn't there something we can do since you wouldn't be "selling" them? The "Vibe" emblem was used on other shirts... was that not Trademarked?we need to know what we can and can't use....I'll post my pocket logo thingy here in a little bit once I fine tune it

ok here are a few quick ideas. I'm still not happy with these but let me know what you think....

ohhhh.. me likey #3 ... but it needs GenVibe.com on it.

Quote, originally posted by VforVIBE »ohhhh.. me likey #3 ... but it needs GenVibe.com on it.+1

LOL that's probly my least favorite one... go figure ok I'll try to work on that one then

Quote, originally posted by ANO_Vibe »& by four color process I'm (again) guessing you mean CMYK? yes, that is what he means. that is also the easiest route to take.by 6 color, he means picking out 6 spot colors, which would be a pain in the (removed).

when you guys are creating your PS documents, make sure your document size is the print size. when you create the new document, set your resolution to 250 DPI, then drop your pictures into that. do not increase their size after placing them in the document, it will lower thier resolution and make them look crappy. you can make them smaller though.save that bad boy as a tiff!

Thanks DM I was pretty sure that's what he meant but wasn't 100% positive.I'm guessing the shirts and everyithing are going to be white, right?

From what I understand,No.But I think white would be best if we have colors in it.We are learning this as we go,so it depends what everyone agrees on.

i would go with white for the best results.

Quote, originally posted by kevera »We are learning this as we go...this is gonna be fun then... haha j/k I agree with white for this first (hopefully we can do this again after seeing how it goes) batch maybe try other colors later

Ok, pretty much all i am asking from people are new designs for the front and back. once we get a few designs we will decide on what we are going with. as far as the color of the clothing, you can choose whatever color you want and if you want a t-shirt, longsleeve, hoodie, or a sweater. but im guessing most likely we will go with a white or gray color for the clothing. when we finally decide on everything. i will get on the purchase of everything, and the price of the clothing will be at cost, so there is no profit in it.

Quote, originally posted by ANO_Vibe »ok here are a few quick ideas. I'm still not happy with these but let me know what you think.... Thats is almost what i was thinking about for the front. I like them. I working on my 2nd draft right now, should be done in about 30mins to 1 hour

Alright i finished my second draft. Next is the final with a few changes possibly and adding some color.

that looks sick 02..i could draw pretty good..but nothing like that

Awesome! I would just suggest to bring out the VIBE lettering and lower the genvibe so you can see it all, then it would pretty much be a perfect concept!

Quote, originally posted by damronjr »Awesome! I would just suggest to bring out the VIBE lettering and lower the genvibe so you can see it all, then it would pretty much be a perfect concept!Thats what i was hoping for. SOME SUGGESTIONS. Thank you damronjr

Quote, originally posted by 02csnow »Thats what i was hoping for. SOME SUGGESTIONS. Thank you damronjrNo prob, and some rims might be nice, too!

here's another one that i did up real quick

334281=11556-2NDIDEASMALLER.jpg

oh, I like that joholste A toon of that would be great Snow, I agree with Jason that "VIBE" should be more visible

Hey, Is that my vibe?

yeah it's your vibe. I couldn't find any pics of my vibe the way that your was facing so i used it. hope you don't mind.

Quote, originally posted by damronjr »No prob, and some rims might be nice, too! Alright i finished my final sketch draft. Added some color and took in the sugesstions from damronjr with bringing out the vibe logo and lowering the genvibe logo.

Quote, originally posted by 02csnow »Nice!

Quote, originally posted by 02csnow »Alright i finished my final sketch draft. Added some color and took in the sugesstions from damronjr with bringing out the vibe logo and lowering the genvibe logo.I would opt for a 5 spoke wheel in silver. make the tires all black. Fix the rear wheel on the left (looks like someone ran into it. lol.). I would change the blue to silver to match our speedos, keep the red on the speedoa and needles , change the silver on the words to all black so it is easier to read. Otherwise it looks much better!

Quote, originally posted by BlueCrush »I would opt for a 5 spoke wheel in silver. make the tires all black. Fix the rear wheel on the left (looks like someone ran into it. lol.). I would change the blue to silver to match our speedos, keep the red on the speedoa and needles , change the silver on the words to all black so it is easier to read. Otherwise it looks much better! The colors i just picked really quick, it can always be changed and when i scan it onto the computer i can adjust everything to be precise. the rims i just did really quick, had so many things running through my head so i just threw those in. For it being just a sketch by hand i think i did pretty good. i dont like photoshop too much b/c i like this to be original.

Quote, originally posted by 02csnow »The colors i just picked really quick, it can always be changed and when i scan it onto the computer i can adjust everything to be precise. the rims i just did really quick, had so many things running through my head so i just threw those in. For it being just a sketch by hand i think i did pretty good. i dont like photoshop too much b/c i like this to be original.Oh, ok . Sorry, I thought you were looking for input on your sketch. Good Job!

I agree with B/C.But,I'm not sure about the "Vibe".I think it would look better without it.Otherwise great.

Hello, Im a new member! Although im constantly on this site reading up on everything vibe, so im not really new. Anywho I am willing, with time permiting, to submit a design ( im an art student, theres a link to my stuff on my profile). I just want to do this for fun, I'll post up some sketches of ideas soon, thanks

Quote, originally posted by Vivid_Art »Hello, Im a new member! Although im constantly on this site reading up on everything vibe, so im not really new. Anywho I am willing, with time permiting, to submit a design ( im an art student, theres a link to my stuff on my profile). I just want to do this for fun, I'll post up some sketches of ideas soon, thanksSweet, can't wait to see what you come up with!

Quote, originally posted by joholste »yeah it's your vibe. I couldn't find any pics of my vibe the way that your was facing so i used it. hope you don't mind.Heck yeah, What an honor

ok here's my revised pocket logo... I'm really having photoshopper's block (chopper's block... haha get it? moving on) at the moment on what to do as far as the actual design goes... I guess I could finish/fix my toon and just use that... I really like what cole did... even if it is the autocross version that can't be had haha

well im working on a new one as of now, and it is a normal vibe (no body kits or no special show vibe), ill try and get it finished by the end of this week. but i wanna say my designs are mainly for the back of the shirts, but they may work on the front.

i think what would look best is to just have a logo on the pocket on the front, then have something sweet on the back.

Really good, simple and to the point design, I like it. May be just move the G over to the left a bit, its doing a weird thing with the black circle in the background.

thanks yeah I noticed that, too version 3 will be up shortly

Quote, originally posted by drunkenmaxx »i think what would look best is to just have a logo on the pocket on the front, then have something sweet on the back.I agree with DM. That would look the best.

heres what i have so far for Version 2 of my Vector Vibe. (the car i used is Nicks a.k.a. NSimkins.) and the black line is part of the page layout not part of the car. i took a screen shot from the computer.

335415=11593-Untitled-1.jpg

Looks good. Can't wait to see the finished product.I really like the red

pocket version 3 (really more like 2.5 but oh well )Cole you are doing an awesome job on those toons I think I should've bought a dang computer instead of getting my cladding painted haha

re: O2C's design:I agree w/BC and kev...... the "VIBE" should probably be the actual vibe emblem font but in black or grey. Best way to modify your sketch is just scan it in.

What if the pocket logo was just blown up on back of shirt with a vibe lurking behind it? Just brainstorming.

Quote, originally posted by MAVibe »What if the pocket logo was just blown up on back of shirt with a vibe lurking behind it? a good thought but I think that would take alot away from the car itself. If anything the logo could be on the back, too just smaller or laid-out a little differently to accomodate the car.

True. take out the GVC and stick a vibe in the center? The black oval looks kinda like a racetrack or street.....

haha there's an idea for the man with time to spare... Cole

these are all looking amazing, cant wait for the final products, even though i dont own a vibe, i'd still buy one of these shirts

Quote, originally posted by RedFire2K »even though i dont own a vibe, i'd still buy one of these shirtshaha POSER! j/kRed, you're good with PS... got any ideas?btw guys here's my WIP toon of Mrizzle's Vibe incase anyone wants to vote for it it's pretty simple compared to Cole's