head unit wiring

Sub-Vibe-R · Post by **Sub-Vibe-R** » Mon Oct 07, 2002 12:42 am

I bough a new head unit to put in my future Vibe.I went for the Pionner DEH-P8400MP.For the moment I have a Pontiac Montana 2001 and i put in it an aftrmarket radio with a wiring harness. I'm wondering if the jack is the same in the Vibe. Both Delco radio seems to be the same but I want to be sure before doing all the wiring.Also, in my montana, I was unable to find out the 12v form the ignition. I pick it up somewhere else. Is the Vibe works the same way?

GreyFixer · Post by **GreyFixer** » Mon Oct 07, 2002 3:14 am

Probably not because the Vibe is made by Toyota and therefore would need a Toyota wiring harness.

Sub-Vibe-R · Post by **Sub-Vibe-R** » Mon Oct 07, 2002 3:36 am

Yes the Vibe is made by Toyota but both Matrix and Vibe have a Gm Delco radio.

Celos · Post by **Celos** » Mon Oct 07, 2002 8:06 am

This has been covered in many threads. Try searching for "wiring harness". You'll come up with part numbers and discussions of various manufacturer's parts. There's some info in this thread: http://forums.genvibe.com/zerothread?id=324

mu_ohio · Post by **mu_ohio** » Tue Oct 08, 2002 9:08 am

The wiring harness is 100% GM and takes a GM harness, but one of the newer ones.

head unit wiring

head unit wiring

Re: head unit wiring (Ben)

Re: head unit wiring (GreyFixer)

Re: head unit wiring (Ben)

Re: head unit wiring (Celos)