Engine noise on startup

1.8-liter VVTL-i (2ZZ-GE) and VVT-i (1ZZ-FE) engine, transmission, exhaust, intake, and performance tuning discussions
Post Reply
andunn
Posts: 24
Joined: Thu Oct 03, 2019 12:20 pm
Location: Missouri

Engine noise on startup

Post by andunn »

2009 Pontiac Vibe 1.8l

I have a loud grinding sound like metal on metal on when starting my car up. Lasts about 1-2 seconds. Usually on a cold start. Notice it in the morning when going to work and getting off work.

It happens off an on randomly, not every day, but seems to be more frequent now. Did it twice today. Any ideas of what it may be? Kind of embarrassing when it happens and others are around. Car seems to run fine other than that terrible noise at start-up.
jolt
Posts: 948
Joined: Sun Mar 02, 2014 2:07 am
Location: Twin Cities, Minnesota

Re: Engine noise on startup

Post by jolt »

Guessing that the starter drive / bendix is hanging up. May be time for a starter replacement.
andunn
Posts: 24
Joined: Thu Oct 03, 2019 12:20 pm
Location: Missouri

Re: Engine noise on startup

Post by andunn »

What would be a good way to go about fixing this since it happens randomly? I found a youtube video and this appears to be similar to what my vibe does.

https://www.youtube.com/watch?v=3ueTHsOc_uc
jolt
Posts: 948
Joined: Sun Mar 02, 2014 2:07 am
Location: Twin Cities, Minnesota

Re: Engine noise on startup

Post by jolt »

Replace the starter. Search this forum and you should find other posts about the stater problem.
Post Reply