GenVibe - Community for Pontiac Vibe Enthusiasts

hotbug1776

Needs more 95% naked bimbos to get the proper "tuner" photo shoot effect.

Other than that, it's quite a nice looking car.

hotbug1776

Glad to see your intro post. I'm thinking about that module now. Would be nice to move the DRL to a different set of lights. Like halos on the fogs.

hotbug1776

Do you need one unit per headlight? And is this $80 for 2 then? Very very interesting. There are some here that may like this for a projector setup to retain DRL. Myself being one.

hotbug1776

YEAAAAA!!!! Another member from PA!!!!

For fighting rust, I simply do the following:
1. Open the garage door.
2. Pull the Vibe inside.
3. Drive the winter beater 4x4
LOL

Where at in PA are you located? with enough members, we may need to get a fall meet going.

hotbug1776

Quick update. Traced the wires to the switch, the yellow wire is controlled by the switch and powers the signal to the PCM for the AC signal. I'm ordering the switch this week, will tie it in ASAP and begin the adjustment phase of the project. This should make hills, passing, and take offs a lot eas...

hotbug1776

Nice, why don't you introduce yourself in the lounge so we can get to know you a little better. Also, why not show us what all is involved with this module. Maybe give some technical info on it and some pics. I don't think anyone here will take your hard earned invention, we just like to hear how th...

hotbug1776

cherryredvibe06 wrote:Yea I actually wished I had of joined earlier but I would not have been able to make the erie meet cause it is to far away

Too far?!?! It's 4 hours!!!

Crazy talk. Lol

Maybe we can get a gathering up at kinzua in the fall before the snow flies.

hotbug1776

'05 was fine on the transmission. It was the '03-'04 trans that was the issue.

hotbug1776

welcome to the forums! http://sphotos-a.xx.fbcdn.net/hphotos-snc6/190512_1859586724616_4517751_n.jpg hazards and rear window defrost don't light up on mine. the only time the defrost lights up is when I have it on. the HVAC should all light up including the arrows. Then you may have a bulb or two o...

hotbug1776

A Psycho Martyr wrote:those are nice. I'd prob paint mine white tho

I would leave it black and reverse your hood art. That would look killer.

hotbug1776

Man, this would be great if I wasn't driving all over the place the weekend before.

Take a vibe load of pics to add to our portfolios. Lol

hotbug1776

I'm trying to find out if anyone has had any luck finding touch up paint in a brush bottle without having to order/buy it from a GM dealership. I am specifically looking for Salsa/Medium Red Mica to touch up the paint chips on the 2005 AWD I just bought (we're a two Vibe household now!). I have loo...

hotbug1776

thebarber wrote:So is it a reverse cowl scoop?

it's like a vent. pulls heat from the engine bay. had one on a cavalier a long time ago, kept the temps low under the hood.

hotbug1776

I believe they are JSP, I may just have to jump on one of these. I can go pick it up seeing as it's an hour from where I'm at.

hotbug1776

Bump to show the updates.

hotbug1776

Usually when a check engine light comes on, the system will either go into open loop, or, into limp mode. This depends on the severity of the issue though. like an O2 sensor might go into open loop, while, having an issue with, say, a cam timing sensor will put the system into a limp mode. I don't k...

hotbug1776

CharlesinGA wrote:
Passenger side door-check is broken off.
OK, I give, what is this?

Charles

That little piece of metal connecting the door to the frame. it keeps the door from opening too far.

Cheaper to buy at a Toyota dealer than a GM dealer, and, the same exact part.

hotbug1776

Thank you for the great advice so far, I greatly appreciate it!! I need a bigger vehicle to tote my canopy, table & chairs & baby & stroller to art shows. I do pet portraits & when it was just me it was fine, I could lay down the back seat & everything fit. Now that I'm expectin...

hotbug1776

Larger than a vibe? What do you need, a church van?!?! If you are going to sell privately, research your vibe, have as much info on its history in paper form as possible. Then, get the average pricing for your area. Set a "low-ball" price in your head, this is your lowest you will go, no l...

hotbug1776

sexy.
that is all.

oh, and welcome!!!

hotbug1776

That's why I went with the AVS. The 3m adhesive is super strong. Also, AVS is a direct supplier to GM, as that is what my parents got from the dealer for their Sonic.

hotbug1776

If a lead doesn't come with the headunit, all you'd need is a USB extending cord. It plugs into the USB port on the rear of the receiver, and has another USB port that you can place anywhere. Thanks for the reply! Yes, I'll be using an extension, but I'm wondering if anyone has any tips for routing...

hotbug1776

Well, I spent about a week of my shutdown at the house in Bellevue. Then, about three days in Erie, then back to Bellevue for a nice 3 days. Next road trip is back to Ohio for the family reunion in the Toledo area.

hotbug1776

Mine is icey at idle. I think you may need a recharge. Or you may have a slipping compressor clutch or loose belt.

hotbug1776

I would think some form of expanding foam would do well. Something for windows and doors that stays less than rigid. That might do well in conjunction to dyno mat on the steel panels.

hotbug1776

It doesn't so much stiffen as it softens in reality. The dyno mat absorbs the vibrations in the same way a sponge absorbs water. Dyno mat on a cymbal will absorb all the vibrations and make it "thunk" instead of ring. Putting insulation in the doors would reflect heat and deaden somewhat, ...

hotbug1776

Thanks for the info! I found this short shifter on monkey wrench website: http://www.monkeywrenchracing.com/product_info.php?products_id=1195" onclick="window.open(this.href);return false; Maybe I will get used to the reach, if not at least there is another option...its only been a day :m...

hotbug1776

thebarber wrote:Does twm still make a shortshifter? I used to have one in my 04 XRS...but I prefer stock

As far as I've been able to find, no. I think the MWR one is the same as the TWM one though, or darn close.

hotbug1776

Thanks all! lol, the 5 speed transmissions kinda suck long-term... Weak link in the drive train? Seems to shift great, although the shifter reach is pretty long, I wonder if they make a short shift kit for this vibe :o Taking a nice road trip so we'll see how it does loaded with camping and fishing...

hotbug1776

Mythbuster Jamie Hyneman(sp) would most likely suggest lard as a good lubricant.

Most others suggest white lithium, which can yellow with age (contamination). I used white lithium every year on my sunroof on the Sunfire. Never gave me an issue. The frame on the sunroof glass rusting did though. Lol

hotbug1776

thebarber wrote:lol, the 5 speed transmissions kinda suck long-term...

I hear ya. I can't wait to get a Japanese spec 6 speed from monkey wrench. I think the 8lb. flywheel and a heavier clutch will join it as well.

hotbug1776

The 05-08 vibes are pretty solid. Just follow the recommended maintenance. Check out the cabin air filter behind the glovebox, it would have been easy for the previous owner to overlook it. For mods, check ebay for vibe or matrix brass shifter bushings. They replace the rubber ones on the transmiss...

hotbug1776

I can hit almost 370miles to a tank in mixed driving. Averaging 35-38 mpg, again, mixed driving. I could do better, but, I keep up with traffic and try to merge safely. I try to plan trips to be the most fuel efficient as well. Nothing like looking at the scan gauge in town and seeing 50+ mpg as you...

hotbug1776

Depending on where you are, there is a good chance help is right around the corner.

Glad you could adopt a Vibe, now, to nurse it back to health.

hotbug1776

Seems easy enough. The only bit that would make me nervous is jacking up the engine. I used a 2x4 and placed the jack on the transmission, almost to the flywheel. This will be a little different in an auto, as you have another oil pan to be careful of. Your best bet may be to use the edge of the en...

hotbug1776

This happened in a van I used to own. In the end it was the cruise actuator motor. Come to think of it, I also had to do this in my sunfire. Both times it was the module inside the engine bay that the cable is connected to.

hotbug1776

Welcome!!!

175k... Almost broken in.

Get some replacement steelies out of a salvage yard, or here, if someone is selling a set.

A location would be nice to have, it helps us to help you.

Enjoy your first car, I still remember my first car that was actually mine, Ford Escort EXP.

hotbug1776

I would sound deaden, but, then I wouldn't hear the road noise or the motor as well. I guess I'm odd that way, I have a nice stereo, but, use it very little. It comes from my VW days I guess. Where I had no insulation of any kind, and had to listen to the motor to shift. Makes you appreciate all the...

hotbug1776

I don't see the problem, that should buff right out.

Sad pic there.

Ditto on stripping what you can. It does help in making your new car feel like the old one.

hotbug1776

star_deceiver wrote:Welcome to GenVibe!!!

Start your search at '05 and newer for stickshift base models. The '03 and '04' 5 speed manual transmissions have known bearing issues.

or, get a 03 04 base, and get the 6 speed right off the bat. LOL

well, that, or get an 05 and put the older front end on it.

hotbug1776

First of let me say, paragraphs. Secondly, even the base model is a fun car with even simple upgrades, and still gets a great gas mileage. If it's the 6 speed that is keeping you from the base, you can buy a 6 speed for the base and still get good gas mileage (Japanese 6 speed has the same FDR as th...

hotbug1776

Yes .... start a separate thread. Depending on the weekend I could sacrifice part of a Saturday/Sunday and head up there. It's only one hour to my north for me :) Color scheme is awesome. Red & Black together are a "HOT" combination. Looking REAL good :D I'd be willing to give up a we...

hotbug1776

Aright, if it's not too far into Michigan, Tim, Ryan, and I should road trip up to see this beast first hand. Lol

Awesome work on it. Can't wait for the finished product. Are you going AWD? Or just front?

hotbug1776

OK, I did the front mount, as I'm too ginormous to fit under the car in the driveway. The rear mount has to wait until I get back to the shop and can get the car on the lift. This is so easy, my 2 year old actually did it. 1. Jack up the front of the car. 2. Under the radiator, to the drivers side o...

hotbug1776

Toyota dealer, or a ase certified shop. A local shop did the work on my 04 because the stealership wanted an arm and a leg, just up to the knee though.

hotbug1776

Thank you for the information. So I take it the manual trans are not very reliable? Can you explain? I am interested in this because I would prefer a manual trans but the Ms. would like an auto. Thanks in advance. 2008 should be fine as far as transmission goes. The problem years were 2003-04 (earl...

hotbug1776

Energy suspension motor mount inserts just came in. Maybe this weekend I'll get them installed and really start feelin the vibe. Lol

hotbug1776

why would you go Vacuum? Why not go with a microswitch that can be hooked onto the lead of the compressor power wire wich energises it.Would be a lot faster to do it this way Where would I mount the switch? Tb or pedal. The vacuum method would be wired in the same fashion, just using the vacuum to ...

hotbug1776

So, I'm working on adding a vacuum controlled switch to automatically shut off the A/C when passing or climbing. Basically any time you are in need of power when on the road and have the A/C on. All the switch will do is deactivate the A/C at a certain throttle opening the power it back up at cruisi...

hotbug1776

Seems to be sitting a little high... from the looks of your other truck, that will be fixed soon.

Welcome to Genvibe.

Search found 581 matches