GenVibe - Community for Pontiac Vibe Enthusiasts

zbyers

key not working in the door is probably just the lock cylinder froze up due to lack of use. some penetrating fluid and patience should fix that.

zbyers

Yes, the matrix parts are identical when comparing model to model. IE: 2009 1.8L base model, 2009 AWD etc.

zbyers

Great deal for that price and mileage!

zbyers

What did it take to make that wing fit?

zbyers

crutchfield is the go-to for headunits and all necessary peripherals.

zbyers

sharp looking ride right there! welcome to the old school group!

we don't have discord or anything of that sort. just here and Facebook.

zbyers

You should be able to get $1900 for it easily.

Do you have this listed on your local Craigslist or Facebook Marketplace? I feel if you listed it there, you should fetch $2500 pretty quickly.

zbyers

Welcome to the best group on the internet! Feel free to post some pics of your Vibe and some more info about her. Mileage, how'd you two meet, etc. etc.

zbyers

KITT222 helped inspire that article.

zbyers

Is it a 2.4L base? Or is it a GT? I believe there is a difference in the rear suspension. The GT should have independent rear suspension. The base with the 2.4L I believe has a solid axle beam. If you can't find any for the front of the 2.4L, you could use the GT/AWD and they should be the same. If ...

zbyers

what brand plugs? where did you get the plugs? what kind of shape is the coil in? wouldn't the cam be more likely to hit the plugs?

post a pic if you get a chance.

zbyers

zbyers

I see a hand full of Geo Metros in my area on a regular basis. One has fresh chromatic paint that shifts from green to purple like this https://www.hiroboy.com/userfiles/images/sys/products/CyanRed__Chromatic_Chameleon_Flip_Paint_15ml_84779.jpeg Neon's? They are all gone. There are a few survivor n...

zbyers

ball joint unbolts from the arm. unless the ball joint is bad, i'd leave it alone.

i'm surprised the engine cradle is bad...they're usually fine unless you hit something lol.

zbyers

VibininFla wrote: ↑Wed Jun 16, 2021 8:40 am
zbyers wrote: ↑Wed Jun 16, 2021 8:22 am LK071 & LK072 are for the FWD Vibe.

I believe the other numbers you noted are for the AWD Vibe/Matrix.
Thanks . Doesn't answer my question though.

ok. yes, plenty have replaced the knuckle.

zbyers

LK071 & LK072 are for the FWD Vibe.

I believe the other numbers you noted are for the AWD Vibe/Matrix.

zbyers

That piece is part of the front bumper cover. There is supposed to be a 10mm bolt holding the corner inside the wheel well.

zbyers

One thing torque doenst pickup is the tranny temp .. i would really like to monitor that .. i see just about every other thing including for and aft CAT temp /O2 sensors .. but no tranny temp .. even on mine with less than 40k miles .. idle without a/c has more vibration than with the a/c on .. the...

zbyers

nice not having to worry about a hybrid component failing though .. like the traction battery .. or the special hydraulic brake booster pump .. I totally agree. That's why I'm putting in many hours doing research to pick out the best possible and my last ICE vehicle knowing that the next one after ...

zbyers

Here ya be also.

http://wehavescissors.blogspot.com/2009 ... be-or.html

zbyers

Some of us here would gladly help you IF we knew your whereabouts :o Update profile for us please :) That is a kind offer but I think I have it worked out. A coworker's grandson is a mechanic at a local dealership and says he can do it for me. Now if the Ebay seller will just get back to me. His li...

zbyers

jolt wrote: ↑Thu Jun 03, 2021 10:19 am Can you post a picture of the end / tip? These must be old stock because Advanced Auto Parts bought out Carquest several years ago.

Carquest still does have a few franchise locations. There is one in each of my neighboring towns.

Are you talking about the little rubber gasket for the injector?

zbyers

The seal isn't 110% waterproof. It is designed to let some water into the sunroof assembly. It's possible the front and/or rear drains are still clogged. It's also possible that the windshield seal at the roof is bad or you have rust under it. That could also cause water to run down the A-pillars. L...

zbyers

Duralast 6956N is passenger side for FWD auto transmission.
Duralast 10908N is driver side for FWD auto transmission.

zbyers

The curious aspect to me is the factory manual's total lack of mentioning the motor-mount aspect of the job. *Shrug* probably since it isn't a huge ordeal. The obvious potential disaster issue is getting the long bolt loose vs. stripping /breaking it off in the block. The You-tube mentions heating ...

zbyers

Hi from the other side of the state!

zbyers

We cut ours off. There are supposed to be a few bolts holding them on..usually too rusty to remove with ease.

zbyers

03-04 clusters are interchangeable, but some obvious differences (color primarily)

05-08 are interchangeable.

05-08 will FIT for 03-04, vice versa, but will not work 100%.

zbyers

Replacing the 2ZZ belt tensioner is nearly identical to doing it on the 1ZZ. The reason for unbolting the motor mount is the long bolt that holds the tensioner on will not clear the frame, so removing the mount and jacking up the engine gives the clearance.

zbyers

Ha, with this post I actually match the calendar year. I must be posting too much . Good one :lol: No one can EVER post too much on this site! Totally agree with your comments and clearly the biggest reason is Facebook. The younger crowd (likely the most owners of these great cars) were poisoned wi...

zbyers

We replaced the rear bearings on multiple AWD Vibes...Pretty straightforward.

Due to the time/cost involved in the front bearings, we have always opted to purchase the Moog hub assemblies. We also usually replace the ball joint at the same time. Much quicker/easier that way.

zbyers

P0171 is usually the intake manifold gasket. Cheap and easy to replace to start with and see if that's the issue.

zbyers

Have you replaced the headunit or other speakers? Could be caused by that too.

zbyers

ZZvroom wrote: ↑Mon Apr 19, 2021 3:43 am Wish I could find a similar writeup on the 2ZZ tensioner replacement....

To replace the belt tensioner? It is identical to this.

zbyers

P0420 = bad cat 99% of the time. The code itself says the o2 sensor is working, as it detected the converter is below efficiency thresholds. P0171 = intake manifold gasket most of the time...could be a vacuum leak, but usually intake manifold gasket. Replacing o2 sensors is pointless. If you are bur...

zbyers

If you have copious amounts of money, it's not hard.

If you're trying to do it cheaply, it's difficult to stay reliable.

zbyers

Yes they fit.

zbyers

KYB supplied the OEM struts, so you can't go wrong there for the closest to OEM ride. Ksport coilovers are nice for the adjustability if needed. A rear sway bar (Progress still makes them for the Vibe) would also help. The Vibes can with 16 or 17 inch rims for 2003-2008. 09+ came with 16, 17, or 18 ...

zbyers

I think you only need the weird socket on the GT. Pretty sure the parts stores also have that Toyota pulley socket in the tool aisle.

I've changed the pulley on my FWD before, and didn't need a special socket that I recall.

zbyers

Glad to hear you've been with us all of these years!

I have family in VA Beach, and keep looking there for another vehicle when the time comes. Usually in good shape regardless of the miles.

zbyers

Please post the list of all of the codes the vehicle is throwing. This will be able to help us paint the picture of what is going on, and what may need to be done to feed the baby. Just gotta have the right formula sometimes.

zbyers

Hmmmm .... that's quite a drive for me. Maybe zbyers will jump on this. He's closer than me. Then I can see him for parts if needed! Also you likely have the basic five speed automatic transmission. They're a dime a dozen out there and readily available. CVT (Continuously Variable Transmissions) we...

zbyers

Yes, check the rear subframe for rust. I have a pretty thorough post with info on the rear subframe and issues/repairs for it.

zbyers

I am on my third set of the now discontinued Michelin Pilot Sport 3+ A/S tires on my 2005 Vibe. My 2003 GT just got a set of the new Pilot Sport 4 A/S tires to replace the terrible Kuhmos that came on the car. I have almost a 100k miles worth of experience with the Pilot Sport all seasons and I lik...

zbyers

Two more years and the Vibe can drink!!

zbyers

Honestly, you could still sell to someone for $500 who wants to replace the tranny.

zbyers

They call out if it fits a 1ZZ or 2ZZ. MWR is one of the best sources for this platform.

zbyers

OrangeMamba wrote: ↑Mon Mar 29, 2021 4:33 pm
zbyers wrote: ↑Mon Mar 29, 2021 2:41 am
OrangeMamba wrote: ↑Thu Mar 25, 2021 5:13 pm Yeah, I've gone totally through the car and saw nothing. Thanks!
I think I have an extra if you want one.
Yes! That would be very nice!

I will check tomorrow when I have a few free minutes.

zbyers

ZZvroom wrote: ↑Mon Mar 29, 2021 2:39 pm
zbyers wrote: ↑Mon Mar 29, 2021 2:36 am
monkeywrenchracing.com has 2ZZ belt tensioners, water pumps, etc.
Alas, not well-enough identified for me to figure out which I need. The Vibe does not appear on the LH selector.

No, but the matrix is listed.

zbyers

Saturday I finally put on the Tokico Blue struts I picked up from SlammedNiss. https://www.instagram.com/p/CM_-USOBw3M/?utm_source=ig_web_copy_link I need to replace the AC Clutch, and then I'll see how much better it rides with Tokico Blues. I am going to pick up some Koni Oranges for a Corolla to ...

Search found 1742 matches