So I had an accident involving the front passenger fender area a couple of weeks ago. I’m making this post because I couldn’t figure out how to get the fender off. I searched and searched, but couldn’t find pics or details online. I know it’s simple for more experienced people, but hopefully these pics can help someone in the future.
This is what the area looks like from the bottom, you cant see much. Edit: Now that I look at it again, I think that's the bolt. Didn't realize it was visible from the bottom. I'll double check in the morning and edit this post accordingly. Either way, you gotta separate the trim from the fender to get the fender off. (This is the driver side, rest of the pics are passenger side):
https://imgur.com/e31KR1f
There’s a white clip that goes into the rear of the fender where it meets the “trim” that runs along the lower side:
https://imgur.com/IMaMF5D
Once you pull back that trim, there’s a bolt that connect the Fender to the body:
https://imgur.com/OUkQmuY
Mine broke off as soon as I tried to turn it, so I had to drill it out. I eventually used a zip tie, since I drilled the hole off-center and made it too large. Anyway, hope that helps someone. Now I just gotta deal with the broken off downstream Oxygen sensor so I can pass inspection. God I hate rust.