Page 1 of 1

adjustable coffee cup holders

Posted: Sat Apr 28, 2018 6:09 am
by motohockey
just bought a 2010 awd, the owners manual shows adjustable coffee cup holders in the center console, probably came with the GT, my awd model does not have them, any suggestions? Thanks

cup holder inserts

Posted: Sat Apr 28, 2018 6:21 am
by motohockey
Hi all, looking for coffee cup inserts for the front console of a 2010 AWD model?
Merci

Re: cup holder inserts

Posted: Sat Apr 28, 2018 11:50 am
by SeattleJeremy
For reference, the center console/cup holders for 2009-2010 are all the same. As well as the 2009-2014 Matrix.

When I purchased my 06 Vibe I found the cup holders were two different sizes, I purchased different travel cups to accommodate the car. In my car the front one is 12oz can size, and the rear one is 32oz travel cup size. So my strategy is use Zojirushi Stainless steal mug https://www.amazon.com/dp/B005PO9T44 and for the rear one a standard ceramic Starbucks style mug.

Re: adjustable coffee cup holders

Posted: Thu May 03, 2018 3:20 pm
by MacGyver
Best bet is finding spares at a junkyard. I always pick these up if I find them in a junkyard, unfortunately I don't have any spares to send out at the moment. The part numbers are 58923-02050-B0 and 58922-02010-B0

Re: adjustable coffee cup holders

Posted: Sun May 06, 2018 3:43 am
by vibenvy
These were standard on all 2009-2010 Vibes, so the previous owner of your Vibe must have misplaced them or something. They are also the same on all 2009-2014 Toyota Matrices. Car-part.com can help you find Vibes and Matrices in junkyards near you where you should be able to score the dividers for cheap as MacGyver mentioned.

For reference, the GM part numbers are; Front separator: #19184894 | Rear separator: #19184893

Re: adjustable coffee cup holders

Posted: Thu Apr 11, 2019 8:38 am
by motohockey
thanks for the info