colored instrument panel

ramenboy... · Post by **ramenboy...** » Wed May 28, 2008 2:52 am

this is a 'kit' on ebay... similar to what one poster was offering to do if we sent our clusters to him on the west coast.what do you guys think?http://item.express.ebay.com/M...sItem

Kamikaze · Post by **Kamikaze** » Wed May 28, 2008 2:58 am

OHHHHHHHHHHHHHHHHHHHH I've been thinking about taking my cluster apart on my bike and swapping out the LED's from the orange, to red or white... I just haven't got the nerve to screw with it... I took some classes, and know how to do it, just never got the nerve to actually do it...

ramenboy... · Post by **ramenboy...** » Wed May 28, 2008 3:09 am

yeah i'm likin it too.the kit comes with the leds and instruction manual... looks ilke a pretty cool thing but i haven't pulled the cluster out to see anything behind it in the 4 years i've had the car.

VforVIBE · Post by **VforVIBE** » Wed May 28, 2008 3:19 am

it looks very,very nice i think i want

joatmon · Post by **joatmon** » Wed May 28, 2008 3:30 am

Quote Â»WE ARE THE ORIGINAL IN GIVE YOU THIS LED'S DON'T WASTE TIME BUY IMITATION.Don't waste time, buy imitation!

ramenboy... · Post by **ramenboy...** » Wed May 28, 2008 3:32 am

Quote, originally posted by joatmon Â»Don't waste time, buy imitation!hahahahahacool product... but english as a second language... not good advertising... like v said, though, ' i think i want'

waveresponder · Post by **waveresponder** » Wed May 28, 2008 3:42 am

"buy now or sumit your best offer".....doesnt Ebay have specll check....lol..yah i dont like how the previousl model clusters were all red..Love the red/white cluster in mine!

KNINE · Post by **KNINE** » Wed May 28, 2008 4:21 am

I prefer the red/white cluster myself, especially in my lava Vibe. That blue cluster would look sweet in your wave Vibe.

kevera · Post by **kevera** » Wed May 28, 2008 4:29 am

Blue tape FTWTrue factThat's what I'm doing,just be careful with the needles.

ramenboy... · Post by **ramenboy...** » Wed May 28, 2008 4:43 am

Quote, originally posted by kevera Â»Blue tape FTWTrue factThat's what I'm doing,just be careful with the needles. hey kev post pics when they're done.weren't you the one planning on sending your cluster out west?

kevera · Post by **kevera** » Wed May 28, 2008 4:48 am

Yes,but I found out I can do it for $4 instead $150 and don't have to send it out to Las Vegas. Here's what they look like,Now,if you want to get rid of the red,you can scrape it off with an exacto blade to get the full blue effect.But I kept the red.

RIT · Post by **RIT** » Wed May 28, 2008 4:56 am

how did you do that ?Was it easy ?

kevera · Post by **kevera** » Wed May 28, 2008 5:02 am

I just finished that.I cheated and used blue painters tape as a test.Works not bad.But I'm going to finish them up with some purple vinyl from a lighting store(they use it on stage lighting) for my desired color.Pop the cluster out,remove the needles,they just pull straight up,and the overlay comes off real easy and back that with the tape or vinyl.Take your time with it and it should be self explanatory,because it's not real hard.

02csnow · Post by **02csnow** » Wed May 28, 2008 5:04 am

It looks like you messed up on the tach needle. Or is just b/c you just started the car and the needle is idling high to warm up.

kevera · Post by **kevera** » Wed May 28, 2008 5:09 am

The car was running

lovemyraffe · Post by **lovemyraffe** » Wed May 28, 2008 5:19 am

I might have to try something like this.

ramenboy... · Post by **ramenboy...** » Wed May 28, 2008 5:20 am

kevalthough i do like leds, yours does look much better because you can choose which color to change! looks suweet!still confused about taking apart the cluster ... pop it out, and there's 2 pieces?

ColonelPanic · Post by **ColonelPanic** » Wed May 28, 2008 6:05 am

I gotta say kev, yours looks much better to me than those that are all blue! The red left there really helps set it off.Great job!

WaveAction · Post by **WaveAction** » Wed May 28, 2008 6:51 am

looks awesome kev...i wanna get blue lights aswell to match the car abit more..maybe do something like you but change the red to blue and leave the rest white or something

Envy03 · Post by **Envy03** » Wed Jun 11, 2008 7:17 am

K, you're going to have to walk the rest of us through this. I just tried to "pop" the cluster out and i only got as far as half getting the "lenses" off of the cluster. It won't come out! I noticed that the cluster is almost adjustable and you can slide it back and forth; which I tried, but to no avail I could not get the lenses out, let alone the actual cluster.Any way you could post a how to with pics? Because your cluster looks clean man, I thinking of doing it green to match my car?!?!?P.S. nice paint job on the bottom half of our vinyl, I have the same deal going on and never thought of that, but you have given me some insight.

Kamikaze · Post by **Kamikaze** » Wed Jun 11, 2008 9:51 pm

Kev-your's redlines at 8200RPM? Holy crap.

Herb · Post by **Herb** » Wed Jun 11, 2008 10:20 pm

Quote, originally posted by Kamikaze Â»Kev-your's redlines at 8200RPM? Holy crap.Mine is like that too. That's where the fuel cut off is on the GT's

Kamikaze · Post by **Kamikaze** » Wed Jun 11, 2008 10:40 pm

Quote, originally posted by Herb Â»Mine is like that too. That's where the fuel cut off is on the GT'sI don't think Kevera is GT... 1zz/SC...

lovemyraffe · Post by **lovemyraffe** » Wed Jun 11, 2008 11:10 pm

I did this to mine too. To get the lens off the gauges, there are 6 or 7 tabs that will need to be pushed. I started on the left and worked my way to the right. After the lens is loose, you will need to pull it out of the dash. It is a tight fit, but it will come out. Plastic off that surrounds the gauges and the lens snaps into, again with 6 or 7 tabs. After getting that off, I couldn't get it out of the dash so I just worked around it, pull the needles off the gauges. The gauge backing is done in 3 pieces. Take each one out, careful not to bend or scratch them, color the parts you want done. Put back together. The needles are the tricky part. Getting them back in the right place was tough. After I put everything back together, the needles kept slipping. It took a couple times of realigning them before they stayed put. Sorry I don't have pictures of this, I will see if I can get some soon.

kevera · Post by **kevera** » Thu Jun 12, 2008 7:07 am

Quote, originally posted by Kamikaze Â»Kev-your's redlines at 8200RPM? Holy crap.You are correct,it's a XRS cluster.2 of us did the the swap at my house.That's actually installed in my Vibe just as a test.Learned something as well.The XRS,GT will run without the cluster but you get no lift( you get a soft lift).Strange but true.

kevera · Post by **kevera** » Thu Jun 12, 2008 7:13 am

After you remove the chrome circles(surround),1 screw center top, and 2 clips on the bottom removes the gauge cluster and then you can get at the wire harness behind the cluster.

WaveAction · Post by **WaveAction** » Thu Jun 12, 2008 8:49 am

i may have to get you to do this for me kev..lol

02csnow · Post by **02csnow** » Thu Jun 12, 2008 8:52 am

I did mine a couple weeks ago. Very easy, takes roughly an hour.

kevera · Post by **kevera** » Thu Jun 12, 2008 9:08 am

Quote, originally posted by 02csnow Â»I did mine a couple weeks ago. Very easy, takes roughly an hour.You didn't say anything.Did you use the tape or vinyl?

kevera · Post by **kevera** » Thu Jun 12, 2008 9:17 am

Quote, originally posted by WaveAction Â»i may have to get you to do this for me kev..lolYou'll have to drive down to my place to do it.

WaveAction · Post by **WaveAction** » Thu Jun 12, 2008 9:29 am

hey thats fine..you aint to far from me..maybe sometime before the epic

02csnow · Post by **02csnow** » Thu Jun 12, 2008 9:50 am

Quote, originally posted by kevera Â»You didn't say anything.Did you use the tape or vinyl?I did the tape, But I am thinking of trying the vinyl to see the difference. If I do the vinyl, I am gonna put it on the actually plastic where the lights are and not on the back of the overlays.

kevera · Post by **kevera** » Thu Jun 12, 2008 10:03 am

Just remember,to use a thick deep vinyl.As you seen,the light passes through the tape and the vinyl is much more opaque.Did you have any problems with calibrating the needles?

kevera · Post by **kevera** » Thu Jun 12, 2008 10:06 am

Quote, originally posted by WaveAction Â»hey thats fine..you aint to far from me..maybe sometime before the epicShould be able to swing that.A saturday or sunday would be best.

02csnow · Post by **02csnow** » Thu Jun 12, 2008 10:14 am

No problem at all with the needles.

WaveAction · Post by **WaveAction** » Thu Jun 12, 2008 10:40 am

saturday/sunday would be best for me too since i work mon-fri, we'll discuss it more sometime

Sublimewind · Post by **Sublimewind** » Thu Jun 12, 2008 10:40 pm

The vinyl that's being referd to is called "gels" Stage lighting gels, and you could change the color to just about anything, as long as you know how to work a primary color chart... Great mod, I might have to consider it myself..

pleaselaunchme · Post by **pleaselaunchme** » Fri Jun 13, 2008 1:31 am

Just so people know with gels:In this kind of application, if it has surprise, no color, or CTC in its name, it isn't going to give you the color you think it will. Also, anything like minusgreen. If you are interested in doing this, you can contact distributors and either get a gel swatch book for a few bucks or free, depends on the place, and you can then see all the colors hands on.http://www.rosco.com/us/filter...olors

kevera · Post by **kevera** » Fri Jun 13, 2008 4:30 am

Quote, originally posted by pleaselaunchme Â»Just so people know with gels:In this kind of application, if it has surprise, no color, or CTC in its name, it isn't going to give you the color you think it will. Also, anything like minusgreen. If you are interested in doing this, you can contact distributors and either get a gel swatch book for a few bucks or free, depends on the place, and you can then see all the colors hands on.http://www.rosco.com/us/filter...olorsI've been told that by a few people.Thanks for the linkThanks Sublime for the actual term "Gels" now I know what to ask for.

colored instrument panel

colored instrument panel

Re: colored instrument panel (ramenboy...)

Re: colored instrument panel (Kamikaze)

Re: colored instrument panel (ramenboy...)

Re: colored instrument panel (ramenboy...)

Re: colored instrument panel (joatmon)

Re: colored instrument panel (ramenboy...)

Re: colored instrument panel (waveresponder)

Re: colored instrument panel (K-NINE)

Re: colored instrument panel (kevera)

Re: colored instrument panel (ramenboy...)

Re: colored instrument panel (kevera)

Re: colored instrument panel (RIT)

Re: colored instrument panel (kevera)

Re: colored instrument panel (02csnow)

Re: colored instrument panel (kevera)

Re: colored instrument panel (kevera)

Re: colored instrument panel (kevera)

Re: colored instrument panel (kevera)

Re: colored instrument panel (Kamikaze)

Re: colored instrument panel (Herb)

Re: colored instrument panel (Envy03)

Re: colored instrument panel (Kamikaze)

Re: colored instrument panel (kevera)

Re: (WaveAction)

Re: (02csnow)

Re: (WaveAction)

Re: (kevera)

Re: (02csnow)

Re: (WaveAction)

Re: (kevera)

Re: (Sublimewind)

Re: (pleaselaunchme)