Back to the OEM springs

miked · Post by **miked** » Sun Apr 02, 2006 9:04 pm

Hey guys, sorry to let you down but I went back up this weekend. It was to much for me, or to low. I've done it all alone and it took me 2h flush. So if any of you need help to put it back to the original or to lower it I'm there to help. Also, I went to Caycan tire to rent a spring compresor and they didn't had one in stock, so I went to NAPA and I now have one. So dont rent one anymore. I've got one and it's a great one.See you all at the next meet.

ArcsVibe · Post by **ArcsVibe** » Sun Apr 02, 2006 9:09 pm

Wow that bad of a ride eh? I know trust me I am also thinking about going back to stock, maybe next winter.What are you going to do with the springs?

miked · Post by **miked** » Sun Apr 02, 2006 9:27 pm

Try to sell them to a memeber that as better roads than us, LOL or someone that one to lower there ride of 3"

xrs06 · Post by **xrs06** » Sun Apr 02, 2006 9:47 pm

Sorry to hear that... Are you thinking about getting another brand of spring with a more modest drop???Also, how much did you pay for that spring compressor?

miked · Post by **miked** » Sun Apr 02, 2006 10:03 pm

Nope, I think i will keep my OEM springs, I'm now chicken to change them again.And for the spring compressor it cost me 60$. Not that bad, but boy does it work great and it is easy to use.

ArcsVibe · Post by **ArcsVibe** » Sun Apr 02, 2006 10:05 pm

See my drop is not as "dramatic" as yours....the ride is harsher than OEM but I blame the streets of Montreal!Honestly though I don't blame you for going back to stock.

BlueCrush · Post by **BlueCrush** » Sun Apr 02, 2006 10:33 pm

I just recently went back to stock springs as well. I'm really enjoying the ride again as the roads here are pretty harsh as well. The only way I will drop it again will be if I can ever afford a set of Tein SS Coilovers ($1200).

ArcsVibe · Post by **ArcsVibe** » Sun Apr 02, 2006 10:39 pm

I would love coilovers as well......

miked · Post by **miked** » Sun Apr 02, 2006 11:16 pm

That'sthe way to go. Coil over.

Raven · Post by **Raven** » Mon Apr 03, 2006 12:05 am

Hey miked,What springs did you have and how much will you sell them for? I just found out mine are counterfeit Teins and I'm replacing them.

miked · Post by **miked** » Mon Apr 03, 2006 12:11 am

They are Canuck Motorsport, they advertise it with a 1.6" drop all around. They are more like 2" front and 2.6" back.

miked · Post by **miked** » Mon Apr 03, 2006 1:41 am

Here's a pic on my ride just before I removed the springs.

Attached files

psycho · Post by **psycho** » Mon Apr 03, 2006 2:26 am

Too bad...your ride looked hot

miked · Post by **miked** » Mon Apr 03, 2006 3:41 am

I know, I know. To bad...

psycho · Post by **psycho** » Mon Apr 03, 2006 2:07 pm

you need another mod now:)Post an add on montrealracing.com ...its local and there's plenty of members with corollas

miked · Post by **miked** » Mon Apr 03, 2006 8:46 pm

Thanks

1oldbanjo · Post by **1oldbanjo** » Mon Apr 03, 2006 11:03 pm

Well you guys are just full of good news. Everybody on here was posting how much like they liked their new lower springs...and how they would never go back to stock. So I ordered some springs and got them last week - and I am waiting for a chance to put them on. Now everybody is going back to stock! The good news is that I bought the Eibach pro-kit which is not a big drop - and the ride is advertised as being close to stock. I live in Northern Kentucky and the pothole problem is not huge - at least not this winter as it was pretty mild. They are however putting a new waterline down our street and the trench is very rough and the street is always dirty.I will still be lowering mine....and hopefully it will stay that way. I plan on changing wheels and tires when winter comes......but I would rather not have a seasonal spring change as well.Dave

Thewhite · Post by **Thewhite** » Tue Apr 04, 2006 10:15 am

Mike si ÃƒÂ§a ne te prend que 2 hres pour faire les 4, je pense que je vais faire affaire avec toi pour remettre mes ressort stock cet automne!

miked · Post by **miked** » Tue Apr 04, 2006 8:51 pm

pas de trouble, it's gona be my pleasure.

ArcsVibe · Post by **ArcsVibe** » Wed Apr 05, 2006 2:03 am

Quote, originally posted by miked Â»pas de trouble, it's gona be my pleasure.Moi aussi SVP

miked · Post by **miked** » Wed Apr 05, 2006 4:05 am

I'm gonna start charging soon. LMAOWould be better to have air tools. Took me 2 hours with air tools. Would be aroud 3h by hand.

ArcsVibe · Post by **ArcsVibe** » Wed Apr 05, 2006 4:55 am

Quote, originally posted by miked Â»I'm gonna start charging soon. LMAOWould be better to have air tools. Took me 2 hours with air tools. Would be aroud 3h by hand.Pizza and beer good enough

miked · Post by **miked** » Wed Apr 05, 2006 5:42 am

That is sure helping...

xrs06 · Post by **xrs06** » Wed Apr 05, 2006 7:48 am

Are you really thinking about going back to stock Sam???If yes, you can always count on me!Maybe we could call our next meet: "The uninstall meet!"

ArcsVibe · Post by **ArcsVibe** » Wed Apr 05, 2006 9:37 am

Quote, originally posted by xrs06 Â»Are you really thinking about going back to stock Sam???If yes, you can always count on me!Maybe we could call our next meet: "The uninstall meet!"LOL not right away I am thinking about leaving it dropped for the summer and then going back to stock for the winter....but merci for the offer!I get it now! You just want to come back to the garage for pizza and beer!

POLO · Post by **POLO** » Wed Apr 05, 2006 10:07 am

Quote, originally posted by xrs06 Â»Maybe we could call our next meet: "The uninstall meet!"LOL

Thewhite · Post by **Thewhite** » Wed Apr 05, 2006 8:03 pm

Quote, originally posted by ArcsVibe Â»LOL not right away I am thinking about leaving it dropped for the summer and then going back to stock for the winter....but merci for the offer!you're follwing my path Sam? you weren't considering it at the meet!

ArcsVibe · Post by **ArcsVibe** » Thu Apr 06, 2006 1:09 am

Quote, originally posted by Thewhite Â»you're follwing my path Sam? you weren't considering it at the meet! LOL that is what happens when you get to be my age, you forget things

thebarber · Post by **thebarber** » Mon Apr 10, 2006 1:02 am

just got another email back from canuck motorsports, miked, i really suggest you contact them about your springs....Quote Â»Hi Adam, just saw this in my Sent folder and have more to say on it: Does this Vibe owner have a boom box in his trunk? This could be the cause for the increased rear drop. Also, occasionally the wrong springs get shipped. This falls under our warranty, and replacements are sent promptly. But the customer has to let us know the drop is wrong, so we can figure out what went wrong and fix it for them. --------------------------------------------------------------------------------From: Wes Webber [mailto:wesw@canuckmotorsports.com] Sent: Saturday, April 01, 2006 11:45 AMTo: 'adam barber'Subject: RE: spring question Thanks Adam, that is odd. IÃƒÂ¢Ã¢Â‚Â¬Ã¢Â„Â¢ll pass this on to the designers. Do you know if these Vibe springs were professionally installed? --------------------------------------------------------------------------------From: adam barber [mailto:adam_barber99@hotmail.com] Sent: Wednesday, March 29, 2006 8:43 AMTo: sales@canuckmotorsports.comSubject: RE: spring question looks like your springs dont drop the advritised 1.6"/1.6".....its actually closer to 1.7"/2.8". a guy on genvibe.com in montreal put them on his vibe......just thought youd want to know about it....here is the link to the page...http://forums.genvibe.com/zero...age=1 --adamaka thebarbermatrixowners.comgenvibe.com

miked · Post by **miked** » Mon Apr 10, 2006 1:54 am

Thanks Adam, have contacted him.

xrs06 · Post by **xrs06** » Mon Apr 10, 2006 5:55 am

Quote, originally posted by miked Â»Thanks Adam, have contacted him.Maybe we will have another "install meet" afterall

thebarber · Post by **thebarber** » Mon Apr 10, 2006 8:53 am

more from CMQuote Â»Thanks for your response, Adam. Glad you found springs you are happy with. ItÃ¢Â€Â™s the buyerÃ¢Â€Â™s responsibility to contact the supplier if the springs arenÃ¢Â€Â™t quite right, if they need warranty service. No, I wonÃ¢Â€Â™t go looking for this elusive customer, try and figure out who this buyer is and ask if he wants service. IÃ¢Â€Â™ll send your Ã¢Â€Âœfree springs for advertisingÃ¢Â€Âœ on to management, but I can pretty much guarantee they wonÃ¢Â€Â™t go for it. ItÃ¢Â€Â™s one thing if the springs need testing, but the Matrix donÃ¢Â€Â™t. It is already done. Wes --------------------------------------------------------------------------------From: adam barber [mailto:adam_barber99@hotmail.com] Sent: Monday, April 10, 2006 5:18 AMTo: wesw@canuckmotorsports.comCc: adam_barber99@hotmail.comSubject: RE: FW: spring question im not sure if he has some subs in his hatch....i dont think he does though. it never came up in the discussion, so i would doubt he has one.the springs werent professionally installed, they were done by the member xrs06.i would suggest that you join genvibe.com (its free and easy to do) and post in that thread i sent you to offer your help, or maybe contact the member directly...is it possible that the wrong rear springs were sent? i know that intrax springs generally has the same issue, and thus its best to check the part numbers on the front and rear springs to make sure they match.all of this is a real shame though, because i was really looking forward to using your springs on my matrix and i currently have other springs on order...for curiosity sake, would you be willing to use my car as tester for your springs?. i am very active in the matrix/vibe community and would be more than willing to do an install how-to and a full reveiw of your springs (all with many before and after shots) which i will post on all major matrix and vibe websites. the gentleman who will be installing my springs is mikes_matrix from matrixowners.com...hes a toyota technician who does spring installations and other misc. work on the side. i think something like this would most certainly boost your sales of matrix/vibe springs in canada and more than likely the states as well as matrixowners alone has 6261 registered members in north america. i would be willing to do this for some free/discounted springs. please let me know asap on this last isssue as i already have other springs on order and have a planned installation date of May 6th, 2006.well, i hope you can get to the bottom of the saggy springs (no pun intended)i hope to hear from you soonregards,--adammatrixowners.comgenvibe.commatrixrides.com

xrs06 · Post by **xrs06** » Mon Apr 10, 2006 9:38 am

"the springs werent professionally installed, they were done by the member xrs06."Hey Adam, are you saying that I am "unprofessionnal"???And I thought of you as a friend Just teasing you mang

thebarber · Post by **thebarber** » Tue Apr 11, 2006 12:30 am

har har harwell, i hope miked gets things worked out...

gensok · Post by **gensok** » Wed Apr 12, 2006 4:10 pm

I have a set of TRD sping sitting in my garage, would've been great if someone helped me to install those.

miked · Post by **miked** » Wed Apr 12, 2006 8:52 pm

per haps at the next meet???take about 2 to 3 hours to install them. All that is missing is an air compressor to accelerate everything.

gensok · Post by **gensok** » Wed Apr 12, 2006 9:08 pm

coo, i have an air compressor

miked · Post by **miked** » Wed Apr 12, 2006 10:23 pm

So we should meet at your place. lol

gensok · Post by **gensok** » Thu Apr 13, 2006 1:39 am

LOL its my parents place

miked · Post by **miked** » Thu Apr 13, 2006 3:47 am

They're invited to. MLOL

Back to the OEM springs

Back to the OEM springs

Re: Back to the OEM springs (miked)

Re: Back to the OEM springs (ArcsVibe)

Re: Back to the OEM springs (miked)

Re: Back to the OEM springs (xrs06)

Re: Back to the OEM springs (miked)

Re: Back to the OEM springs (miked)

Re: Back to the OEM springs (BlueCrush)

Re: Back to the OEM springs (ArcsVibe)

Re: Back to the OEM springs (miked)

Re: Back to the OEM springs (Sunny)

Re: Back to the OEM springs (miked)

Re: Back to the OEM springs (miked)

Re: Back to the OEM springs (psycho)

Re: Back to the OEM springs (miked)

Re: Back to the OEM springs (psycho)

Re: Back to the OEM springs (miked)

Re: (Thewhite)

Re: (miked)

Re: (ArcsVibe)

Re: (miked)

Re: (ArcsVibe)

Re: (xrs06)

Re: (xrs06)

Re: (ArcsVibe)

Re: (Thewhite)

Re: (thebarber)

Re: (miked)

Re: (xrs06)

Re: (thebarber)

Re: (xrs06)

Re: (gensok)

Re: (gensok)

Re: (gensok)