Hi guys , I want to buy some OEM brz 2013 wheel on my vibe 2006 , 5x100 17 inch , with a offset of +48. I want to know if it will fit,
Thanks for reply and if you have picture it will be wonderful.
Fred
I thought if the hub bore of the wheels is larger than the hub bore of the vehicle, that you need to get hub centric rings? Lug nuts aren't going to be able to do their job properly if the wheel is bouncing around on the hub. Just my $0.02.SeattleJeremy wrote:Yes, the BRZ\FR-S wheels do fit. However, the Subaru Hub bore is 56.1mm, Vibe Hub bore is 54.1.
That is true, that's why I said.vibenvy wrote:I thought if the hub bore of the wheels is larger than the hub bore of the vehicle, that you need to get hub centric rings? Lug nuts aren't going to be able to do their job properly if the wheel is bouncing around on the hub. Just my $0.02.SeattleJeremy wrote:Yes, the BRZ\FR-S wheels do fit. However, the Subaru Hub bore is 56.1mm, Vibe Hub bore is 54.1.
This makes the wheel center on the lugs, AKA Lug Centric.SeattleJeremy wrote:but you will need to get lug nuts that have a cone seat bottom so the rim stays centered on the hub. Something like these
http://www.amazon.com/Gorilla-Automotiv ... 000CMDA1C/
Good deal. I have tsw nurburgring wheels on my 05. They are +35. I wish the offset can be larger especially on the rear wheels.roycet4 wrote:Just starting this post up again.. I am looking at 17" wheels off a 2009 Subaru Impreza, 5X100 with a 48mm offset, Sounds like I should be ok, Would folks agree? as long I use the correct lugnuts.. I have the opportunity to purchase 4 tire/wheels for $200 total The tires are 225/45R17's
Thanks
Royce