I'm going to attempt a custom front and rear bumper.

General discussions about the Pontiac Vibe & Toyota Matrix. New members, introduce yourself here!
Post Reply
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

I've done a lot of research on this and here is what I have come up with. I use to be a fiberglass specialist for car stereo applications and I'm about 90% sure (after talking to wings west) that I can modify this to fit the vibes front bumper and rear bumper because the dimensions are very close. I will need to buy both parts from wings west and the front upper clip for the 04' vibe. Once I have the parts I will need to (cross fingers) cut both of them and modify them to fit. Is there anyone out there that sees something that I am missing? Please let me know.

http://www.wingswest.com/catalog/popup_ ... 03&image=0" onclick="window.open(this.href);return false;

http://www.wingswest.com/catalog/popup_ ... 06&image=0" onclick="window.open(this.href);return false;

It will take a lot but it would be better then trying to modify one from scratch. :ugeek:
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
MrHatchWagon
Posts: 443
Joined: Wed Dec 07, 2011 12:14 am
Location: Bathurst, NB

Re: I'm going to attempt a custom front and rear bumper.

Post by MrHatchWagon »

That looks pretty sweet, I wish you lots of success!
Image
* Voted May 2012 MOTM! *
How To: Cupholder LED Mod
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

I have a buddy that has been doing fiberglass work for much longer then me that is going to help. He just got back to me about my dimensions and confirmed that they look good but he suggested something I didn't think about. Carbon fiber in lays to strengthen the seams. I will need a new front upper bumper clip, and the front wings west bumper. Were going to start the front bumper in the next week or so after I get it, (hopefully if he has time) we will get started soon. I will document the steps. Wish me luck! Front bumper is going to be first. If that is a success then the rear will come shortly after.
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
User avatar
vibenvy
Posts: 7121
Joined: Wed Apr 15, 2009 5:38 am
Location: Sandwich, IL

Re: I'm going to attempt a custom front and rear bumper.

Post by vibenvy »

Looks like an interesting project. Good luck ;)!
Image
2009 Liquid Platinum Metallic Vibe GT - 5-Speed Auto – Garage
2009 Steel Blue Metallic Vibe GT - 5-Speed Auto – Garage
MrHatchWagon
Posts: 443
Joined: Wed Dec 07, 2011 12:14 am
Location: Bathurst, NB

Re: I'm going to attempt a custom front and rear bumper.

Post by MrHatchWagon »

J_TO_ENVY wrote:Looks like an interesting project. Good luck ;)!
+1
Image
* Voted May 2012 MOTM! *
How To: Cupholder LED Mod
tpollauf
Posts: 4025
Joined: Wed Jan 20, 2010 11:37 am
Location: Toledo/Oregon, Port Clinton Ohio
Contact:

Re: I'm going to attempt a custom front and rear bumper.

Post by tpollauf »

This sounds like a cool mod indeed :D I admire your determination and don't let ANYBODY get in your way while working on this project. I know you'll succeed. Definitely post pics of all your progress. You got my support ;)
Image
2009 Vibe GT (manual), 2009 G8Gt, 2009 Vibe GT (auto)
2014 Silverado, 2004 Vibe GT

"everything is modifiable"
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

Thanks! I know I can do it. Just to what cost is the question and how long to make the mods. I've learned over the years that anything can be done with fiberglass if you know how to work with it. I'm just worried about my wife. Last time I put a fiberglass front bumper on a vehicle she got to close to a curb in a parking lot and busted it. :evil:
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
User avatar
Blanco_Diablo
Posts: 1089
Joined: Fri Nov 16, 2007 1:03 am

Re: I'm going to attempt a custom front and rear bumper.

Post by Blanco_Diablo »

Those look much better than the body kits that are out there for the Vibe. Wish I had some fiberglass skills :) Good luck, will be amazing when finished!
CAMOGIRL
Posts: 849
Joined: Mon Feb 28, 2011 1:18 am

Re: I'm going to attempt a custom front and rear bumper.

Post by CAMOGIRL »

Blanco_Diablo wrote:Those look much better than the body kits that are out there for the Vibe.
AGREED. I hate how the ones offered for the vibe would make my 03 front end look like the 05ups... I picked my 03 specifically FOR the body style. Do you suppose that front bumper could be modified to fit under the "nose" of the car?
Well-behaved women rarely make history.
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

Yes. I'm going to buy a new upper piece then cut the whole bumper off the new wings west bumper and fiberglass it to the upper vibe bumper piece. Basically when look at the bumper from wings west. Picture cutting below the "bumper" part then take the lower piece to the vibe.
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
KITT222
Posts: 2257
Joined: Sat Dec 04, 2010 1:45 pm
Location: Flint, Michigan

Re: I'm going to attempt a custom front and rear bumper.

Post by KITT222 »

Show her the napkin diagram. She'll get it then! :lol:

How are you going to work around the reverse lights, out of curiosity?
CAMOGIRL
Posts: 849
Joined: Mon Feb 28, 2011 1:18 am

Re: I'm going to attempt a custom front and rear bumper.

Post by CAMOGIRL »

Wingnut wrote:Yes. I'm going to buy a new upper piece then cut the whole bumper off the new wings west bumper and fiberglass it to the upper vibe bumper piece. Basically when look at the bumper from wings west. Picture cutting below the "bumper" part then take the lower piece to the vibe.
I get what you are doing, I was just thinking about how much of each would have to be cut off on yours, and would you have to cut part of my original nose to allow enough of the new lower part to be soundly attached.. it seems like an awful lot would have to be cut off to just fit where my black bumper is on my car...thoughts?
Well-behaved women rarely make history.
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

@Nick- LOL! Hush, hush... I told you the trick. :lol: Picture your vibes front bumper (red) with the black changed out to the lower part of this matrix bumper. It will look a little different but it should look almost made for the vibe! No cutting (I hope to the top end of your bumper). Let me see If I can produce a picture of the lower end . :geek:
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

@ Nick about the reverse lights. Haven't gotten that far yet. :lol: I will show pics as it goes.
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
CAMOGIRL
Posts: 849
Joined: Mon Feb 28, 2011 1:18 am

Re: I'm going to attempt a custom front and rear bumper.

Post by CAMOGIRL »

D'you think there would be enough there to still be sound? Probably have to do a little fabricating on mounting it without "fiberglassing" it to the upper, as you put it lol, or would you have to do that to get it to stick.. I'm really into this idea :)

P.S. off topic, I just realized that the new system edited my quote in my sig... :lol: :roll: :lol:
Well-behaved women rarely make history.
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

My planed cut on the wings west front end. :o Or something very close. I hope everyone gets the idea. ;)

Image
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

It will either not match up on the sides, the headlights or the front grill. Plus the vibe doesn't have the front bump out "bumper".
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

Compare a vibe front end to this front end. Look at it close and long at every angle and you will see what I'm talking about. The upslope at the headlights is different, the grill center pieces are lower with the matrix and higher with the vibe, (look at the hoods) the only way, less stress and the less mods is to cut the lower end of the west wings front bumper and meet it with the upper clip of the front of the vibe bumper.
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
ligion
Posts: 171
Joined: Mon Aug 13, 2007 2:47 am

Re: I'm going to attempt a custom front and rear bumper.

Post by ligion »

Image
Give it an Evo look, lol. Photoshoped this yesterday.
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

lol! :lol: That looks like something you would see in europe! Not my style!
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
ligion
Posts: 171
Joined: Mon Aug 13, 2007 2:47 am

Re: I'm going to attempt a custom front and rear bumper.

Post by ligion »

I searched far and wide through google and i cant find a vibe at the same angle as that matrix in the picture you added. I wanted to photo shop them together, but the matrix is at a different angle then i can find a pic of a silver 04 vibe. Someone should take a pick of one. My vibe has a kit on it already so i cant do it.
tpollauf
Posts: 4025
Joined: Wed Jan 20, 2010 11:37 am
Location: Toledo/Oregon, Port Clinton Ohio
Contact:

Re: I'm going to attempt a custom front and rear bumper.

Post by tpollauf »

Wingnut wrote:lol! :lol: That looks like something you would see in europe! Not my style!
Totally agree :? It resembles the "too much grill area" on the new Ford Focus also. Not sure if it is right for our Vibes. Just my $.02 :)
Image
2009 Vibe GT (manual), 2009 G8Gt, 2009 Vibe GT (auto)
2014 Silverado, 2004 Vibe GT

"everything is modifiable"
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

(removed)!!! This thing is way off!! :lol: Custom is an understatement! See you guys next summer with this project.... The vibe has had the front bumper pulled off over 7 times now to get measurements and this damn shrinking I'm dealing with is driving me nuts. Hanging with it though. I can tell you one thing.... If this works. It will be the last one I ever do. :cry:
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
Wingnut
Posts: 216
Joined: Sat May 19, 2012 7:23 pm
Location: IL

Re: I'm going to attempt a custom front and rear bumper.

Post by Wingnut »

By the way.... I've cut this bumper 8 times so far with 3 screw ups that I had to fix. :evil:
2004 Vibe 5 speed with factory oem body kit and wings.
Mods: Sound system, 18" Excel MR7 Rims, 225 40 R18 tires ACT 4 puck clutch.

Image
Mariachi
Posts: 620
Joined: Fri Jan 18, 2008 12:03 pm

Re: I'm going to attempt a custom front and rear bumper.

Post by Mariachi »

gl on the project
Image
beemerphile1
Posts: 505
Joined: Tue Jul 14, 2009 12:12 am
Location: NE Ohio

Re: I'm going to attempt a custom front and rear bumper.

Post by beemerphile1 »

Look forward to seeing the final result.
NE Ohio - home to the most successful Pontiac drag racing team in history - Bill Knafel's "Tin Indian" and also home to Summit Auto Racing.
2009 Vibe base 1.8L auto towing 2009 Aliner Sport hardsided pop-up
Post Reply