F/S 2003 Vibe parts.

Ponyota · Post by **Ponyota** » Thu Apr 19, 2012 3:40 pm

Hi, I have 1 abyss hood GM oem off my 2003 GT In really nice condition, I also have the cross bars for the roof rack GM oem Like New!, Injen Aluminum engine cover, Black matchbox vibe New!, Remote vibe NEW!, Cabin filter NEW!, Air cleaner box, filter, hoses, assembly GM oem Like new!. Rear black cargo mat GM oem NEW! "not for sub woofer", All Seat back storage with first aid kit GM oem Like New!, Antenna GM oem, Springs GM oem very low miles, Stereo GM oem like new!, MOMO carbon fiber door kick plates and a grey silver MOMO shifter boot, both new! Progress rear sway bar New!, Rear bumper scuff pad, GM oem NEW! Glove box door oem, Center console GM oem. I might be forgetting a few things so have a look at the pictures below. What I don't sell here will be listed on eBay and I will be selling them for much more on there. Just wanted to give you all a chance on anything I have before I do list it on eBay.

ITEMS ARE PICTURED BELOW!!!

Storage with dividers SOLD
Silver matchbox SOLD
Grill inserts SOLD
6 speed Shifter knob SOLD

I have lots of things available, take a look at the pictures below!

As soon as I actually receive money for something I will post it right here that it is SOLD.

Please either post here what you want, PM me or my cell is in a post. If you message me on my cell, please include your name on Genvibe and your real first name. I have no idea who I'm talking with unless you do. Thank you!!

thebarber · Post by **thebarber** » Thu Apr 19, 2012 6:04 pm

location?

Ponyota · Post by **Ponyota** » Thu Apr 19, 2012 6:18 pm

Oh sorry, I live in Greenwood Indiana. I used to live In Lafayette. It's just south of Indy. Thanks!

abyss-vibe · Post by **abyss-vibe** » Thu Apr 19, 2012 9:47 pm

PMed you

colterk · Post by **colterk** » Thu Apr 19, 2012 10:41 pm

Ponyota wrote:I believe I also have the cross bars for the roof rack

These would fit an 08 yea? Would you ship to WA?

KITT222 · Post by **KITT222** » Fri Apr 20, 2012 2:57 pm

I am interested in the grille inserts

Ponyota · Post by **Ponyota** » Sat Apr 21, 2012 5:59 pm

Ok, just to let you all know. I work nights 12 hrs and I drive 2 hours each way to and from. Unfortunately I won't be able to even get at the parts until this next Wednesday or Thursday. Since there is lots of questions to be answered like cost of shipping and price and all, I want to wait until I get the items together to take pictures and post. I'll be more than happy to address all the questions then. I will be taking best offers on all the items. I know I have more items off my vibe. I also have a new, in box rear cargo mat which is the black OEM one. Gosh knows what all I have but I will let you all know as soon as I do. You can continue to leave questions and I will answer each and every one of them the best I can. Thank you all for your interest and have a great rest of the weekend!

455SD · Post by **455SD** » Mon Apr 23, 2012 1:57 pm

Interested in the cargo mat, if it is the carpeted factory one with Vibe embroidered on it.

You sound like you work my old shift, and drive. Doesn't leave time for much else.

Thanks!

Ponyota · Post by **Ponyota** » Mon Apr 23, 2012 2:02 pm

Yes its the factory one. It's nit anything made by anyone or another company. It has the red vibe logo. It's never been used and still in the plastic and box.

KITT222 · Post by **KITT222** » Sat Apr 28, 2012 8:54 pm

Any updates on this?

A Psycho Martyr · Post by **A Psycho Martyr** » Sun Apr 29, 2012 3:58 pm

yo, that grille is probably like mine and would siiiiickkkkkk on your Vibe KITT

Ponyota · Post by **Ponyota** » Mon Apr 30, 2012 6:42 am

Okay, Ive taken pictures with my phone and I have to send them email to my email and download them to the computer and upload them to here. Thank you for being patient. Ive been so busy lately with work I just didn't have time to do anything.

Ponyota · Post by **Ponyota** » Mon Apr 30, 2012 7:31 am

click on the pictures to view a larger image

: Cargo black mat oem, new; backmat.jpg (54.4 KiB) Viewed 9197 times

: air cleaner oem; aircleaner.jpg (79.15 KiB) Viewed 9197 times

: hood oem; hood.jpg (54.09 KiB) Viewed 9197 times

Ponyota · Post by **Ponyota** » Mon Apr 30, 2012 7:34 am

: center console oem used; centerconsole.jpg (67.9 KiB) Viewed 9197 times

: caben filter oem and oem antenna; cabinfilter.jpg (78.35 KiB) Viewed 9197 times

: back bumper rubber protector oem new; bumper.jpg (77.27 KiB) Viewed 9197 times

Ponyota · Post by **Ponyota** » Mon Apr 30, 2012 7:37 am

: first aid kit oem; firstaid1.jpg (82.72 KiB) Viewed 9197 times

: first aid kit oem; firstaid.jpg (67.14 KiB) Viewed 9197 times

: crossbars for roof rack oem; crossbars.jpg (85.35 KiB) Viewed 9197 times

Ponyota · Post by **Ponyota** » Mon Apr 30, 2012 7:42 am

: aluminum grills; grill.jpg (91.67 KiB) Viewed 9197 times

: glove box; glovebox.jpg (96.15 KiB) Viewed 9197 times

: seat back storage and first aid; seatback storage.jpg (61.18 KiB) Viewed 9197 times

Ponyota · Post by **Ponyota** » Mon Apr 30, 2012 7:49 am

: MOMO carbon fiber doorsills; momo.jpg (86.57 KiB) Viewed 9197 times

: matchbox Vibe; matchbox.jpg (86.23 KiB) Viewed 9197 times

: Injen aluminum engine cover; injen.jpg (84.8 KiB) Viewed 9197 times

Ponyota · Post by **Ponyota** » Mon Apr 30, 2012 7:52 am

: After market Progress rear sway bar; swaybar.jpg (86.82 KiB) Viewed 9197 times

: Stock Radio Moon and Tunes CD; stockraidio.jpg (100.97 KiB) Viewed 9197 times

: remote Vibe; remotevibe.jpg (75.62 KiB) Viewed 9197 times

Ponyota · Post by **Ponyota** » Mon Apr 30, 2012 7:55 am

: Picture 2 of oem GM rear storage box, collapsible; storageGM2.jpg (61.77 KiB) Viewed 9197 times

: OEM GM rear cargo storage box with dividers; storageGM.jpg (58.96 KiB) Viewed 9197 times

Ponyota · Post by **Ponyota** » Mon Apr 30, 2012 8:07 am

Click on the pictures for full picture. I also have a oem 6 speed shifter knob, a grey leather MOMO shifter boot that you can see in the Injen engine cover picture. If You are interested in any of these items I will take PayPay Or you can pick up local and I'll always accept cash. Im taking offers and the highest offer will get the items. Please don't low ball me on everything because you'll just be wasting my time and yours. Im not running everything to the Post Office to have weighed and measured until I receive a real solid offer. So if you are interested please post your offer on here. It'll go something like an auction, so offer what you really want to spend on the item. If you want more pictures just ask, if you want more information on an item, just ask. I'll do my best to answer all asap. Thanks!
I have a gauge cluster cover also that can be seen in the pictures, its for sale to.
Also have the original spring for the car, they have less than 3000 miles before I pulled them off. If you want these, their for sale to.

colterk · Post by **colterk** » Mon Apr 30, 2012 12:47 pm

Ponyota wrote:So if you are interested please post your offer on here. It'll go something like an auction, so offer what you really want to spend on the item.

85$ plus shipping on the rear sway bar? Is it used?

KITT222 · Post by **KITT222** » Mon Apr 30, 2012 1:25 pm

$50.00 + shipping (55378) for grilles? $3 for silver Matchbox Vibe?

Ponyota · Post by **Ponyota** » Mon Apr 30, 2012 1:43 pm

I'll do the 85 plus shipping on the Progress sway bar and it has never been mounted.It does not have the progress sticker that went on it. It has no rust and the powder coat is in like new condition.

I'll do the 50 plus shipping on the aluminum grill inserts and 3 dollars on the silver Vibe Matchbox.

IM me your information and I will get them boxed and find out what shipping will be. If you have a specific carrier that you would like to use please indicate who that would be, USPS, UPS, FEDEX, ECT......

I take PayPal as payment, I'll send you an invoice once I figure shipping to your location.

If you would like to message me on my personal phone my number is 765 - four nine 0 - 9 two zero 1 My name is Rob.

Thank you!

colterk · Post by **colterk** » Mon Apr 30, 2012 2:11 pm

Only other question is making sure it does come with the poly-bushings? And would I need any other components to mount it?

firestorm · Post by **firestorm** » Mon Apr 30, 2012 3:13 pm

Do these OEM cross bars mount on the OEM roof racks, nothing else needed?

I'll throw $50 at them if they are available.

AustinG · Post by **AustinG** » Mon Apr 30, 2012 6:24 pm

My hood has a bend in it from stupidity that happened when closing the hood (The bar was left up). If the oem hood will fit a 2005 Vibe AWD base, (Which I assume it does), then I will make an offer. Does it have any large dents or paint scrapes?

I understand hoods are expensive...about $500 for a new one. Does $250 + Shipping sound okay? I'm not sure what a good price would be, and since it's a big item, shipping would be expensive as well.

Ponyota · Post by **Ponyota** » Wed May 02, 2012 7:41 am

Just to let you all know, I've sent some PM's and I'm taking offers on everything shown.
$250 on the hood is good, I'll accept that. I am going to have to have it packed for shipping. So I will need some earnest money up front if you are willing. I just don't want to get stuck with a packing charge up front. I'll probably ship UPS on the hood and will have to take it to the UPS hub. There are a few scratches in the hood from sitting around but no dents. Most all the small scratches should come out with a wax and a buff. They are mostly just surface ones. Its been sitting in the garage for a long time, actually years! So just brushing against it type scratches but noting serious. It has real good paint and no rust.

As far as the cross bars, I have another person interested in them, so give me a couple days to let him reply. Thank you!

BTW, I'm going to the UPS and USPS now and I have to work the next two nights. I can reply to questions but wont be able to take anything to the Post Office or UPS until Friday Afternoon.

Ponyota · Post by **Ponyota** » Wed May 02, 2012 8:25 am

AustinG wrote:My hood has a bend in it from stupidity that happened when closing the hood (The bar was left up). If the oem hood will fit a 2005 Vibe AWD base, (Which I assume it does), then I will make an offer. Does it have any large dents or paint scrapes?

I understand hoods are expensive...about $500 for a new one. Does $250 + Shipping sound okay? I'm not sure what a good price would be, and since it's a big item, shipping would be expensive as well.

I'll need a zip code to where you want it shipped to. Thank you!

Ponyota · Post by **Ponyota** » Wed May 02, 2012 8:26 am

firestorm wrote:Do these OEM cross bars mount on the OEM roof racks, nothing else needed?

I'll throw $50 at them if they are available.

I'll need a zip code to where you want it shipped. I'm waiting on another person to see what they have to offer on them so hang in there. No, it has the clips and the winged screw things. It's all there just like when I took them off years ago. These were never used to hold anything..... Thank you!

Ponyota · Post by **Ponyota** » Wed May 02, 2012 8:31 am

colterk wrote:
Ponyota wrote:So if you are interested please post your offer on here. It'll go something like an auction, so offer what you really want to spend on the item.
85$ plus shipping on the rear sway bar? Is it used?

To Northern Washington by UPS with $100 insurance is $19.01
No it's not used. No it does not come with the bushings. You can still order them from the the company, not sure what the cost is..... Nothing else needed to install.

AustinG · Post by **AustinG** » Wed May 02, 2012 9:56 am

Ill have to cancel on the hood...my car requires new struts I found out today...Ill need to save money for them...Sorry about that.

Ponyota · Post by **Ponyota** » Wed May 02, 2012 2:06 pm

AustinG wrote:Ill have to cancel on the hood...my car requires new struts I found out today...Ill need to save money for them...Sorry about that.

No problem, thanks anyway!

Ponyota · Post by **Ponyota** » Wed May 02, 2012 2:46 pm

455SD wrote:Interested in the cargo mat, if it is the carpeted factory one with Vibe embroidered on it.

You sound like you work my old shift, and drive. Doesn't leave time for much else.

Thanks!

Make an offer for the mat and shipping will be about 20 with 100 in insurance to your location.

Vaggeto · Post by **Vaggeto** » Wed May 02, 2012 9:40 pm

Are the grill a replacement or overlay? Basically, do they work if you don't have any original grills installed?

Also, do you have an asking price for the mat and the stereo?

Thanks!

Ponyota · Post by **Ponyota** » Wed May 02, 2012 10:04 pm

Vaggeto wrote:Are the grill a replacement or overlay? Basically, do they work if you don't have any original grills installed?

Also, do you have an asking price for the mat and the stereo?

Thanks!

The aluminum grills are overlays, attach to the original grills upper and lower but I'm pretty sure they are already sold. I will do 60 on the mat and 10 on the stereo plus shipping. Let me know if you want them. Thanks!

dannyy72 · Post by **dannyy72** » Thu May 03, 2012 12:36 pm

Interested in your momo kick plates, but I'm in Vancouver Canada. Do you ship up here?

Ponyota · Post by **Ponyota** » Thu May 03, 2012 3:58 pm

dannyy72 wrote:Interested in your momo kick plates, but I'm in Vancouver Canada. Do you ship up here?

Yes I'll ship there but I'm not sure about any customs it may go through or if it will get held up or any extra fees that it may inquire. Make me an offer and pm me your zip code and area you live and I'll get you a total cost on shipping. Thanks!

Ponyota · Post by **Ponyota** » Thu May 03, 2012 5:28 pm

AustinG wrote:Ill have to cancel on the hood...my car requires new struts I found out today...Ill need to save money for them...Sorry about that.

Looks like keithvibe has some struts for sale with like 10k miles on em! Check out his thread. Says make offers! I would imagine it would be loads cheaper than new ones.

dannyy72 · Post by **dannyy72** » Fri May 04, 2012 1:53 pm

Would you let your MOMO door sills go for $20 and the OEM cabin filter go for $5, plus shipping to Canada of course.

Ponyota · Post by **Ponyota** » Fri May 04, 2012 2:42 pm

dannyy72 wrote:Would you let your MOMO door sills go for $20 and the OEM cabin filter go for $5, plus shipping to Canada of course.

Sounds good, sold! I'll get together and let you know what shipping will be. Thank you!

dannyy72 · Post by **dannyy72** » Fri May 04, 2012 2:49 pm

Ponyota wrote:
dannyy72 wrote:Would you let your MOMO door sills go for $20 and the OEM cabin filter go for $5, plus shipping to Canada of course.
Sounds good, sold! I'll get together and let you know what shipping will be. Thank you!

kk, thanks.

M3RR1LL · Post by **M3RR1LL** » Tue May 08, 2012 10:18 pm

How much shipped for rear sway bar and Vibe diecast?

JVibe · Post by **JVibe** » Fri May 11, 2012 6:09 pm

Hi,

Would you do $10 Shipped for the Antenna?

Ship to zip: 31322

Thanks!
Jimmy

455SD · Post by **455SD** » Sat May 12, 2012 12:20 pm

PM sent

Ponyota · Post by **Ponyota** » Sun May 13, 2012 1:44 am

455SD wrote:PM sent

PM back to ya.

Ponyota · Post by **Ponyota** » Sun May 13, 2012 1:49 am

JVibe wrote:Hi,

Would you do $10 Shipped for the Antenna?

Ship to zip: 31322

Thanks!
Jimmy

Hi Jimmy, I can probably do that for you. Please give me until Monday or Tuesday to get caught up on some things first. It's yours if you want it though. I've just been swamped at work and just now able to get back on here. Thank you and I'll pm you later on so we can get it all set up for ya.

Ponyota · Post by **Ponyota** » Sun May 13, 2012 1:53 am

dozmorovds wrote:Hello, my name is Dmitry. I live in Russia.

I want to get "first aid kit oem" and "seat back storage and first aid".

How much it cost with shipping?

Thank you for answer.

Hi Dmitry, I will have to package them and get a quote on shipping for you. I will need an address where you want them shipped. Please pm me your information and I will get the quote for you and let you know. Thank you!

Ponyota · Post by **Ponyota** » Sun May 13, 2012 1:57 am

M3RR1LL wrote:How much shipped for rear sway bar and Vibe diecast?

Hi, I'll need a zip and I don't have a die cast but I have the black matchbox and remote control car. Were you talking about one of those?

JVibe · Post by **JVibe** » Mon May 14, 2012 5:30 pm

Ponyota wrote:
JVibe wrote:Hi,

Would you do $10 Shipped for the Antenna?

Ship to zip: 31322

Thanks!
Jimmy
Hi Jimmy, I can probably do that for you. Please give me until Monday or Tuesday to get caught up on some things first. It's yours if you want it though. I've just been swamped at work and just now able to get back on here. Thank you and I'll pm you later on so we can get it all set up for ya.

Sounds good to me.

Thanks again,
Jimmy

dannyy72 · Post by **dannyy72** » Fri May 18, 2012 12:20 pm

dannyy72 wrote:
Ponyota wrote:
dannyy72 wrote:Would you let your MOMO door sills go for $20 and the OEM cabin filter go for $5, plus shipping to Canada of course.
Sounds good, sold! I'll get together and let you know what shipping will be. Thank you!

kk, thanks.

PM'd you my address, thanks.