revised part-out thread

List items you have for sale, want to buy, or see for sale (ie. seen on eBay). NO COMMERCIAL LISTINGS! (follow posting rules)
Post Reply
thebarber
Posts: 1162
Joined: Mon Aug 30, 2004 5:01 am
Location: kitchener, ontario

revised part-out thread

Post by thebarber »

ok, i pulled apart the vibe and these are the pieces im selling as theyre easy to get off etc.

if you want some random trim piece you can have it cheap, but it'll have to wait for the next time i go to the car

so

stainless axleback. looks exactly like TRD, but no engraving. (corzryde has a TRD and is local to me, which is why i say it)
100usd/125cad picked up
Image

roof rail caps NO BROKEN CLIPS.
is $10usd/15cad each +shipping reasonable? if not, make an offer
Image

2003 XRS/GT ecu. PnP to a 2004 for 6200rpm lift.
$100usd/125cad shipped
Image
Image

6 speed knob. leather worn off a bit when i bought the car. still in good shape otherwise.
$30usd/40cad + shipping
Image
Image
Image

kenwood HU/car mount/harness. will take an mp3 stick. pnp into any 2003-2008
$40usd/50cad + shipping
Image

storage drawer. $5usd/5cad +shipping
Image
Image

vibe 03-08 roof rack delete kit. everyone know these fibreglass pieces fit terribly when you buy them. ive trimmed/modified these to fit perfectly. painted black. comes with stainless extended mounting bolts (8).
$150usd shipped to lower 48, 125cad picked up.
Image

$5usd/5cad + shipping
Image

$5usd/5cad +shipping
Image

cruise stalk
$5usd/5cad + shipping
Image

lower shifter console. drawer stays closed pretty well, iirc.
10usd/15cad picked up
Image

oem tweeters and covers.
SOLD

i have TWO oem shift boots, one with rips/holes one without
$10usd/15cad for both
Image

steering column plastics
FREE
Image

upper grills. i have TWO sets. 1.5 sets shown. i also think i have ONE decent pair of lowers
10usd/15cad per pair
Image

oem roof rail crossbars.
$80usd shipped per pair/60CAD picked up
Image

2003 XRS/GT cluster. ~124xxx MILES. speedo in MPH.
$80usd shipped/ $75cad picked up
Image

oem mats. hole in DS front, iirc
$10usd/15cad for the set
Image

carbon fibre stubby antenna
$5usd/5cad + shipping
Image

i have TWO 2zzge engine covers. good shape, just filthy
$10usd/15cad
Image

K&N typhoon intake. filter needs cleaning. MAF included
sold

2zzge engine
~124xxx miles. runs well, pulls hard.
$650usd picked up, 900CAD

c60 transmission
~124xxx miles. need to take 1-2 shifts at redline easy. would make a good 6speed swap for a 1zz
300USD, 400CAD

2zzge fidanza flywheel.
sold

exedy clutch (good for 1zz or 2zz).
sold

OEM Suspension with 90k miles on it. everything assembled with struts caps etc for easy swap.
sold

STILL IN THE CAR:
leather steering wheel - - i'll take it out when i send the car to the wreckers.

GONE/UNAVAILABLE
coilovers
green winters - you can have them for free if you swap something else onto the car
Last edited by thebarber on Fri Sep 23, 2016 6:49 am, edited 2 times in total.
Image
thebarber
Posts: 1162
Joined: Mon Aug 30, 2004 5:01 am
Location: kitchener, ontario

Re: revised part-out thread

Post by thebarber »

i also have a 2zz alternator ($40usd/50cad)
2zz intake manifold ($50usd/60cad)
TWO 2zz throttle bodies (100usd/120cad)
2zz exhaust manifold NOT port matched ($50usd/60cad)
Image
Fatpaul
Posts: 84
Joined: Thu Sep 01, 2016 9:10 am

Re: revised part-out thread

Post by Fatpaul »

Hey man I want the tweeter setup, shoot me a pm and let's get this done!
thebarber
Posts: 1162
Joined: Mon Aug 30, 2004 5:01 am
Location: kitchener, ontario

Re: revised part-out thread

Post by thebarber »

one 2003 ecu SOLD
tweeters/covers SOLD
Image
Fatpaul
Posts: 84
Joined: Thu Sep 01, 2016 9:10 am

Re: revised part-out thread

Post by Fatpaul »

......
ptjoe
Posts: 2
Joined: Fri Jun 17, 2016 6:35 am

Re: revised part-out thread

Post by ptjoe »

Hello, do you have the cruise control module available? It sits behind the instrument cluster.
thebarber
Posts: 1162
Joined: Mon Aug 30, 2004 5:01 am
Location: kitchener, ontario

Re: revised part-out thread

Post by thebarber »

ptjoe wrote:Hello, do you have the cruise control module available? It sits behind the instrument cluster.
i should, yes
Image
Tmontague
Posts: 28
Joined: Sun Sep 11, 2016 5:17 pm
Location: Hamilton ON

Re: revised part-out thread

Post by Tmontague »

Anyone know if the stock suspension will fit on my '05 awd vibe without lowering it's height? If so i'll buy them


Barber, I'm also interested in buying the air recirculate servo from you. Located behind glove box on left size held on by 2 10mm or 7/16 bolts. I can pick up
The Fun: Toyota Vios '08 5spd m/t heavily modified
The Family whip: '05 Vibe AWD
morrisangelo
Posts: 21
Joined: Sat Mar 26, 2016 8:45 pm

Re: revised part-out thread

Post by morrisangelo »

GT air intake tubing BEFORE the air box (down in the LF wheel well under battery)?
thebarber
Posts: 1162
Joined: Mon Aug 30, 2004 5:01 am
Location: kitchener, ontario

Re: revised part-out thread

Post by thebarber »

morrisangelo wrote:GT air intake tubing BEFORE the air box (down in the LF wheel well under battery)?
car came with SRI, but im sure i have the tubing before the airbox from another GT/XRS. hows $10usd plus shipping?
Tmontague wrote:Anyone know if the stock suspension will fit on my '05 awd vibe without lowering it's height? If so i'll buy them


Barber, I'm also interested in buying the air recirculate servo from you. Located behind glove box on left size held on by 2 10mm or 7/16 bolts. I can pick up
oem suspension sold. only the fronts will fit awd

if you want to pull the air recirc, its yours
Image
Tmontague
Posts: 28
Joined: Sun Sep 11, 2016 5:17 pm
Location: Hamilton ON

Re: revised part-out thread

Post by Tmontague »

sounds good, let me know when works for you
trevor.montague[AT]hotmail.com
The Fun: Toyota Vios '08 5spd m/t heavily modified
The Family whip: '05 Vibe AWD
morrisangelo
Posts: 21
Joined: Sat Mar 26, 2016 8:45 pm

Re: revised part-out thread

Post by morrisangelo »

YES, $10 + shipping works for the complete OEM GT air intake tubing leading into the airbox. Let me know a total and how to pay.
Thanks, Harvey
Khaj
Posts: 25
Joined: Sat Jun 11, 2016 7:43 pm
Location: Palm Bay, FL

Re: revised part-out thread

Post by Khaj »

mats available? how much shipped to Florida? zip code 32907
Also, do you have the outside driver door handle available? Mine's snapped.
2006 Pontiac Vibe Base Auto
Image
thebarber
Posts: 1162
Joined: Mon Aug 30, 2004 5:01 am
Location: kitchener, ontario

Re: revised part-out thread

Post by thebarber »

Khaj wrote:mats available? how much shipped to Florida? zip code 32907
Also, do you have the outside driver door handle available? Mine's snapped.
have mats, handle too big a pain

shipping likely not cheap due to size and weight of package...i would guess 60CAD to ship
Image
thebarber
Posts: 1162
Joined: Mon Aug 30, 2004 5:01 am
Location: kitchener, ontario

Re: revised part-out thread

Post by thebarber »

intake sold
stock suspension sold
flywheel sold
clutch sold
Image
thebarber
Posts: 1162
Joined: Mon Aug 30, 2004 5:01 am
Location: kitchener, ontario

Re: revised part-out thread

Post by thebarber »

transmission sold
Image
Khaj
Posts: 25
Joined: Sat Jun 11, 2016 7:43 pm
Location: Palm Bay, FL

Re: revised part-out thread

Post by Khaj »

thebarber wrote:
Khaj wrote:mats available? how much shipped to Florida? zip code 32907
Also, do you have the outside driver door handle available? Mine's snapped.
have mats, handle too big a pain

shipping likely not cheap due to size and weight of package...i would guess 60CAD to ship
nevermind. Not worth it to me. thanks!
2006 Pontiac Vibe Base Auto
Image
thebarber
Posts: 1162
Joined: Mon Aug 30, 2004 5:01 am
Location: kitchener, ontario

Re: revised part-out thread

Post by thebarber »

Khaj wrote:
thebarber wrote:
Khaj wrote:mats available? how much shipped to Florida? zip code 32907
Also, do you have the outside driver door handle available? Mine's snapped.
have mats, handle too big a pain


shipping likely not cheap due to size and weight of package...i would guess 60CAD to ship
nevermind. Not worth it to me. thanks!
Pretty well what I figured
Image
Post Reply