hid

vibe11 · Post by **vibe11** » Tue Jan 20, 2009 12:04 pm

where is a good place to buy hid's online?

Wolfman213 · Post by **Wolfman213** » Tue Jan 20, 2009 8:09 pm

if you want things "proper" wait till keith does the group buy again and do a retrofit. The kit in the GB had both bulbs, ballast, projectors and even sealant. The only additional thing you needed was extra wire for the angel eyes. Other than that, tons of places are going to be different and it's basically first hand experience on whether a place is good or not. I've got two sets from HIDKing on ebay and plus a buddy got a kit from them as well and they have been excellent. Super quick shipping and great product.

Whelan · Post by **Whelan** » Tue Jan 20, 2009 11:12 pm

If you can find a good vendor on Ebay. That;s where I got my Xentec

Amtron · Post by **Amtron** » Wed Jan 21, 2009 12:24 am

Quote, originally posted by vibe11 Â»where is a good place to buy hid's online?I have some for sale:http://forums.genvibe.com/zerothread?id=35883

vibe11 · Post by **vibe11** » Wed Jan 21, 2009 1:29 am

i need 9007 for my friends car. but for my car im looking for both hi and low beam. good luck with the sale amtron

Amtron · Post by **Amtron** » Wed Jan 21, 2009 1:33 am

Quote, originally posted by vibe11 Â»i need 9007 for my friends car. but for my car im looking for both hi and low beam. good luck with the sale amtron Thanks!

NascarXprt · Post by **NascarXprt** » Wed Jan 21, 2009 3:48 am

vibe11 you can use Amtrons HIDs for your low beam fog lights!

Wolfman213 · Post by **Wolfman213** » Wed Jan 21, 2009 3:55 am

Are you sure? The wiring harnesses should be different since Amtron's kit is for the 9003/H4 connection and the fogs being the 9006.

Amtron · Post by **Amtron** » Wed Jan 21, 2009 4:01 am

Cole's right. All you need is a different bulb I believe. Where's Keith, he knows everything about this stuff. It's either the bulb or conversion, but I believe it is the bulb.

Wolfman213 · Post by **Wolfman213** » Wed Jan 21, 2009 4:11 am

My bad. I figured that since before you were using the H4 factory connection to connect to your ballast that it would not be compatible to the 9006 factory connection that would connect to your ballast.

NascarXprt · Post by **NascarXprt** » Wed Jan 21, 2009 4:33 am

i think so, i wasnt sure which HID Matt had.

Sublimewind · Post by **Sublimewind** » Fri Jan 23, 2009 1:50 am

Quote, originally posted by Whelan Â»If you can find a good vendor on Ebay. That;s where I got my Xentecyeah, aren't you having problems with those....

keithvibe · Post by **keithvibe** » Fri Jan 23, 2009 6:36 am

Quote, originally posted by vibe11 Â»where is a good place to buy hid's online?from me... check my siggy.

Celtic_Curse · Post by **Celtic_Curse** » Fri Jan 23, 2009 7:26 am

Do you need to disable the DRL to use the HID's?

keithvibe · Post by **keithvibe** » Fri Jan 23, 2009 7:49 am

Quote, originally posted by Celtic_Curse Â»Do you need to disable the DRL to use the HID's?Yes or you can add a resistor, to have your lights come on full power at start up.Disabling is a better option to save bulb life.

Celtic_Curse · Post by **Celtic_Curse** » Mon Jan 26, 2009 12:47 am

Thanks, noted.

hid

Re: (Wolfman213)

Re: hid (vibe11)

Re: hid (Amtron)

Re: hid (vibe11)

Re: hid (vibe11)

Re: (Wolfman213)

Re: (Wolfman213)

Re: (Whelan)

Re: hid (vibe11)

Re: (Celtic_Curse)