Interior Bulb Replacement Guide

Upholstery, floor mats, seats, window tint and anything inside the vehicle and not electronic

User avatar
ragingfish
Posts: 11022
Joined: Tue Oct 15, 2002 8:23 am

Interior Bulb Replacement Guide

Postby ragingfish » Sat Aug 28, 2004 2:31 am

List of all replacement bulb sizes for the interior of the vehicle.

Roof-Mounted Map Light - Moonroof
Bulb Style = 1895


Mirror-Mounted Map Lights - No Moonroof
Bulb Style = 192


Center Dome Light
Bulb Style = 31mm x 10mm Festoon (8W)


Rear Hatch Area
Bulb Style = 31mm x 10mm Festoon (8W)

YES!I still visit GenVibe periodically. I have not forgotten about my "original" family over here!

2009 PONTIAC G8
3.6L V6 (256 HP @ 6300 rpm, 248 ft-lbs. @ 2100 rpm)

User avatar
Mr. Poopypants
Posts: 3428
Joined: Mon Nov 18, 2002 11:59 pm

Re: Interior Bulb Replacement Guide (ragingfish)

Postby Mr. Poopypants » Sat Aug 28, 2004 3:58 am

SWEET! Thanks, this is what I have been looking for.

A bartender is just a pharmacist with a limited inventory.

User avatar
SheVibe
Posts: 127
Joined: Fri Mar 31, 2006 1:34 pm

Re: Interior Bulb Replacement Guide (Mr. Poopypants)

Postby SheVibe » Tue Apr 04, 2006 1:25 pm

SWEET
this make ordering leds super easy.
thanks

sagekai
Posts: 79
Joined: Sat Nov 11, 2006 9:41 am

Re: Interior Bulb Replacement Guide (ragingfish)

Postby sagekai » Sat Jan 13, 2007 2:08 am

Does anyone know how to pop the cover off of the roof mounted maplight (moonroof) to install a new bulb?
2003 Vibe Base- Silver Two-Tone, Injen CAI, Sony X-Plod Head Unit, 16" Voxx MG Rims, Tein S-Tech Lowering Springs, Painted Rear Brakes, OEM Exhaust Tip, Custom Rear Seat Back Covers MiVibe-ToolGuy's Fog Lamp Protectors, 111K Miles!

User avatar
ColonelPanic
Posts: 8236
Joined: Sun Jan 05, 2003 8:48 am
Location: South Central Indiana

Re: Interior Bulb Replacement Guide (sagekai)

Postby ColonelPanic » Sat Jan 13, 2007 2:23 am

Remove the one philips head screw in the moonroof control / map light assembly. Then you can pry the entire piece off.
03 Vibe base. Born 10/14/2002 06:07 AM
Neptune. Auto, Moon & Tunes, power package. 130k mi.

Image

'13 Sonic LT - 1.4L ECOTEC turbo/6A. 90k mi.
'15 Escape SE - 1.6L EcoBoost, FWD. 43k mi. (hers)
ImageImage

User avatar
joatmon
Posts: 9073
Joined: Fri Mar 21, 2003 5:19 am
Location: SMC MD

Re: Interior Bulb Replacement Guide (sagekai)

Postby joatmon » Sat Jan 13, 2007 2:24 am

this one?
http://forums.genvibe.com/zero...18486

edit - CP beat me by a mnute


TheGeebs
Posts: 8
Joined: Fri Sep 07, 2007 3:41 pm

Postby TheGeebs » Mon Dec 10, 2007 5:07 am

I can't find a part number for the bulbs behind the heater control knobs. My Temperature control is completely dark and the fan speed is dark on the right.

I pulled the center instrument panel cover off and found a small bulb with a plastic base. No part number due to its size. Any ideas? Also I can't figure out how to remove the module that holds the vent/fan/temp controls. I found small plastic tabs to free the unit but something is holding it in from the left side so I can't reach behind to remove the bulb. Any suggestions would be most helpful.


User avatar
ianvibe87
Posts: 9
Joined: Tue Apr 22, 2008 8:28 am

Re: Interior Bulb Replacement Guide (ragingfish)

Postby ianvibe87 » Tue Apr 22, 2008 8:54 am

What would the size of bulb for the shifter? The bulbs that light up the D-for drive. Thanks

User avatar
kevera
Posts: 3127
Joined: Thu Jul 31, 2003 8:30 pm

Re: Interior Bulb Replacement Guide (ianvibe87)

Postby kevera » Tue Apr 22, 2008 9:59 am

Quote, originally posted by ianvibe87 »
What would the size of bulb for the shifter? The bulbs that light up the D-for drive. Thanks

Sylvania Part is a #74 bulb

June '07 VOTM Sept '07 MOTM HCVO /HCMO

The Red Devil

User avatar
ianvibe87
Posts: 9
Joined: Tue Apr 22, 2008 8:28 am

Re: Interior Bulb Replacement Guide (kevera)

Postby ianvibe87 » Fri May 23, 2008 5:23 am

Has anyone tried to replace the bulb that lights up the shifter letters? i can't figure it out

User avatar
Wolfman213
Posts: 1377
Joined: Fri Sep 05, 2008 12:58 am
Location: Anderson, IN

Postby Wolfman213 » Sat Mar 21, 2009 9:06 am

The bulbs behind the HVAC controls are a NEO4, as listed on http://superbrightleds.com/instrument.html, as well as the bulb that lights up A/C and Recirc (the words not the activation as those are soldered in and pretty much unnaccesible.) The hazard light and the rear defrost (both indicator and picture) are NEO3 bulbs. Be very careful when replacing them as there is no wiring harness for them. They simply twist in and out of the particular hole and have contacts that get wedged between the base and the HVAC controls.

**If replacing with LEDs** When relpacing these bulbs with LEDs, it is best to mark one side of the base. This will help you if you put the bulb in backwards are they are polarized.

Also to add to kevera's reply, it's a #74 wedge. They do make #74 bayonet (round) as well so I figured I'd throw that in there.

April 2010 Co-MOTM * Custom LED Gauge Cluster swap * LED dome, HVAC, and shifter * Retrofit projector w/ blue halo * Kenwood KDC-HD942U * Herculined cargo area * Debadged *
Wolfman's Garage

User avatar
A Psycho Martyr
Posts: 2573
Joined: Mon Feb 08, 2010 6:13 am
Location: Cullman, Alabama

Re: Interior Bulb Replacement Guide (ragingfish)

Postby A Psycho Martyr » Thu Jan 06, 2011 4:49 pm

Quote, originally posted by ragingfish »

Center Dome Light
Bulb Style = 31mm x 10mm Festoon (8W)

Rear Hatch Area
Bulb Style = 31mm x 10mm Festoon (8W)

So....what's the bulb number? Can't find measurements on sperbrightleds like he's listed here



Ant03vibe
Posts: 8
Joined: Thu Nov 30, 2017 6:23 pm

Re: Interior Bulb Replacement Guide

Postby Ant03vibe » Wed Dec 27, 2017 11:18 am

Hi Vibers

The Vibe my son just purchased for his first car (oh yeah! :-)) is a 2003 Vibe with a sunroof. The map/reading light bulb is burnt. I went to replace it but the #1895 bulb has a 14v rating and the one in it only has a 12v rating (the metal casing state "Life12v10w-g" Any concerns with a 14volt? Or should the previous owner replaced it with a 14v bulb? Not sure what the original voltage should be.

thanks for your help!

Chad

andrewclaus
Posts: 126
Joined: Tue Oct 03, 2017 6:38 pm
Location: Golden, CO

Re: Interior Bulb Replacement Guide

Postby andrewclaus » Wed Dec 27, 2017 12:02 pm

Either will work. A given wattage lamp rated 14V will be dimmer than one rated 12V, but will probably last longer (less heat).

The 12V rating on auto electrics is a nominal rating. The actual battery voltage, fully charged, exceeds 13V, and the alternator often supplies greater than 14V. The 12V rating accounts for voltage drop over the circuit to the load.

Ant03vibe
Posts: 8
Joined: Thu Nov 30, 2017 6:23 pm

Re: Interior Bulb Replacement Guide

Postby Ant03vibe » Wed Dec 27, 2017 12:11 pm

Many thanks!
Have safe and happy New Year!

Chad :D


Return to “Interior”

Who is online

Users browsing this forum: No registered users and 2 guests