2zz-ge header removal

treesleavedents · Post by **treesleavedents** » Mon Jun 03, 2019 10:42 pm

After 4 years of balefully staring at the PPE boxes in my garage, I finally had enough money for the 2.5 inch mandrel bent stainless axle back that would complete the all stainless PPE long tube header with spiked collector and mid-pipe with high flow cat and resonator. So I installed them in preparation for having the axle back welded up tomorrow and promptly forgot to take pics and video. So after I finished but before I lowered the car back down I made a video for you guys.

https://www.youtube.com/watch?v=WgliSEelHB8&t=222s

zbyers · Post by **zbyers** » Tue Jun 04, 2019 3:26 am

nice. let us know how it sounds when she's all back together.

treesleavedents · Post by **treesleavedents** » Tue Jun 04, 2019 12:01 pm

Will do!

treesleavedents · Post by **treesleavedents** » Tue Jun 25, 2019 11:11 am

Well, it's all together and I got the axle back welded up with a 14" Borla XS muffler. Sadly I can report that it is waaaaaaaaay too loud at highway speeds above 60 mph, Droney as hell too... SO I'm gonna have to find a better muffler solution. Most likely something bigger and maybe with a baffle or two, although I'd like to avoid that if I can.

2zz-ge header removal

2zz-ge header removal

Re: 2zz-ge header removal

Re: 2zz-ge header removal

Re: 2zz-ge header removal