Looking at the SC from the nose side there is a allen head screw about 5 O'clock. There you can check the level, drain or refill. If you have the SC out it is easier to drain it. With the SC in the car, on a level surface, when you remove that allen screw the fluid should just barely come out or be at the level of the hole.
If you have it out and it's never been changed before it might be a good time to do so because that fluid is about 8 years old.
05 Matrix XR 4WD and 03 Vibe GT
"If you want Government to solve your problems, then you are the problem!" BMSR
Trix MODS: SRI w/ AEM filter, Vibrant/Magnaflow Cat-back, Alutec Lightweight Crank Pulley
GT MODS: Cosmo SRI, DRL, Auto Stop