Hey everyone.....It's been a long time, but I'm still here!I continue to have issues with my belt. It used to not stay lined up correctly but that seems to be all right now. I still get quite a bit of squeaking when I start up. Sometimes it seems like it is stuck or something because the RPM's will waiver at idle and sometimes acceleration seems blunted. I used to have the Gatorback belt but I don't know if there is a better belt. I did get a Smoothflow Pulley but didn't have to change belt size for it.........can I get away with a slightly smaller belt? Ideas?
Hey man!I think I have a Dayco one on it now. I've always had issues with the belting on this thing and all the shimming. Maybe I should just take it in and tell the mechanic to do whatever he can to make it work. I know it is messing with my performance and mileage.
Check the idler pulley bearing. Make sure it isn't dried out or doesn't have play in it. Should be a $25 items
05 Matrix XR 4WD and 03 Vibe GT
"If you want Government to solve your problems, then you are the problem!" BMSR
Trix MODS: SRI w/ AEM filter, Vibrant/Magnaflow Cat-back, Alutec Lightweight Crank Pulley
GT MODS: Cosmo SRI, DRL, Auto Stop
I'll have to check that.What is the size of the stock SC'er pulley? I have the 2.3" Smoothflow Pulley..........trying to see if I can get away with using a smaller belt.
My idler puller was squealling at start-up. Hit it ( a couple times) with some wd-40 while the car was idling and has been quiet ever since. I think I may have gotten some moisture in there after hitting a large puddle. The squealing started the next day. Stock SC pulley is 2.4"Good luck man.
I shot some WD-40 in there.......didn't make a difference. A lot of times it'll squeal when putting it in reverse. Sometimes I can feel it slipping because the RPM's will jump a bit. Generally works better when warmed up.Could I get away with a smaller belt? How much smaller could I go?
take the one you have off take it to auto zone buy two or three that are a little smaller try them all out keep the one that works take the others back. they wont care as long as you dont mess them up.
Quote, originally posted by Petrucci914 »Put a belt on that is .5" shorter. Car runs better now than it EVER did. No laboring or anything. Hitting 8-9PSI.Good deal! What is the brand & size of the belt you bought?
My Fleet:
'15 Ford Fusion AWD Titanium 2.0 Tutbo
'14 Lincoln MXZ AWD 2.0 Turbo
'14 Nissan Pathfinder AWD SL
'05 Pontiac Vibe AWD