So I'm thinking that if my Unichip doesn't sell or I get no good offers, I'm going to just get it working for the supercharger. I don't want to run 10PSI so I want to keep it close to stock. I talked to a guy at Unichip and he said that they have one for the stock setup and that it is rated UP TO 10PSI, not mapped specifically for it. Lancer told me not to get that map because it ran too rich and messed up his engine. Can I get the Supercharger adapter and keep the map I already have on it? My guess would be not since it would be running too lean, but now it runs too rich. Seems like a dynotune is almost a must now. Thoughts?
That's the same dilemma I ran into with my uni-chip.But the price to get it working for the s/c frightened the hell out of me,so I sold it.Unichip told me a dyno tune was a must and the "Turbo Module" had to be added.The gains weren't worth it to me.But the good thing about the unichip is then you can run the CAI.
June '07 VOTM Sept '07 MOTM HCVO /HCMO The Red Devil
Ya, there's a whole adapter and such you need. In the end you'll be replacing the TRD ecu piggyback, and the TRD adapter piece. You'll just be using the new wiring clips that you ran the red and 3 other wires to.