Bypass Factory Amp With Diagram 2003 Vibe

Stereo, security systems, vehicle electronics, and electrical-related discussions
Post Reply
Posts: 2
Joined: Sat Nov 19, 2016 8:29 pm

Bypass Factory Amp With Diagram 2003 Vibe

Post by Tickle2727 » Sat Jul 06, 2019 1:37 pm

This is for your information. I could not find a diagram like this so I pulled the doors off one by one and chased the wires down through continuity. I did the same to the back of the stereo. This helps with the hum or whine or whining that happens with these after an aftermarket stereo is installed. I did not find a single harness adapter for this model and I spent hours trying to create a harness before I decided to cut one at a time and (removed) connect them together.

Please forgive my drawing. I’m not exactly artistic. 😝
10F82834-00DA-49A3-B9C4-4AAD3CF1EA83.jpeg (543.45 KiB) Viewed 420 times
Tags: bypass, aftermarket, vibe, matrix, amp, amplifier, harness, adapter, whine, whining, hum, buzz, moon and tune.

Posts: 20
Joined: Mon Dec 31, 2018 1:01 am
Location: Eastern North Dakota

Re: Bypass Factory Amp With Diagram 2003 Vibe

Post by 350kVibe » Wed Dec 11, 2019 12:21 am

Kudos. *Bump* :D
2009 Vibe GT

Post Reply