Blower not working at setting 1 and 2 but works at 3 and 4

cythraul · Post by **cythraul** » Fri Nov 04, 2016 8:25 pm

Hi everyone,

Probably just a relay as I believe there's one for every speed except the fastest. Could it be the bunch of relays over the glove compartment?

Thanks!
cyth

ehoff121 · Post by **ehoff121** » Sat Nov 05, 2016 8:59 am

Sounds like the resistor is bad.

This is the part you'll need: http://www.partsgeek.com/167rl6j-pontia ... istor.html

See step 6 in the post below on replacing the blower motor resistor...

viewtopic.php?f=28&t=29211&hilit=blower+resistor

Pretty easy fix.

cythraul · Post by **cythraul** » Sat Nov 05, 2016 12:54 pm

Awesome, thanks!

I've ordered the part from Rock Auto, they were cheapest to get the part to Canada. :)

cythraul · Post by **cythraul** » Mon Nov 14, 2016 5:23 pm

Received and installed the part today. Should be good for another ten years. The new part was from Japan. :)

Thank you very much for the help!

ehoff121 · Post by **ehoff121** » Mon Nov 14, 2016 5:28 pm

cythraul wrote:Received and installed the part today. Should be good for another ten years. The new part was from Japan.

Thank you very much for the help!

The best way to thank us is to pay it forward!

Blower not working at setting 1 and 2 but works at 3 and 4

Blower not working at setting 1 and 2 but works at 3 and 4

Re: Blower not working at setting 1 and 2 but works at 3 and 4

Re: Blower not working at setting 1 and 2 but works at 3 and 4

Re: Blower not working at setting 1 and 2 but works at 3 and 4

Re: Blower not working at setting 1 and 2 but works at 3 and 4