Search found 56 matches

by 302LVR
Wed Aug 09, 2017 7:47 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: Remove DRL (or change to Fogs) and keep Automatic Sensor lights
Replies: 34
Views: 35645

Re: Remove DRL (or change to Fogs) and keep Automatic Sensor lights

petervivian wrote:The pictures are all gone. Anyone have saved a pdf or a copy? Thank you.
Try this link. viewtopic.php?t=9844 This was shared to me when i did the fog light mod on mine. You literally have to clip just 1 wire i believe.
by 302LVR
Thu Jul 27, 2017 7:37 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: '03 GT - Can't disengage the clutch
Replies: 1
Views: 864

Re: '03 GT - Can't disengage the clutch

Pretty sure it's gonna be your clutch master cylinder/slave cylinder which is what engages your clutch hydraulically. If that part fails or the seal loses pressure, it won't engage you're clutch properly. You may also wanna check the rubber bushings on your clutch cable endlinks in case they broke o...
by 302LVR
Thu Jul 27, 2017 7:29 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: VIBE GT CRANKS BUT WON'T START
Replies: 13
Views: 4493

Re: VIBE GT CRANKS BUT WON'T START

I've looked around and have asked plenty and luckily got some help from other members on here. Also recently found out that MWR(MonkeyWrenchRacing) has the repair manual for Celicas on their site in PDF form and its very similar to what needs to be done on the vibe. I will be embarking on this proje...
by 302LVR
Thu Jul 27, 2017 7:18 pm
Forum: Audio, Electronics, Electrical
Topic: CELICA GTS TO VIBE GT ECM. WILL IT WORK?
Replies: 2
Views: 1052

Re: CELICA GTS TO VIBE GT ECM. WILL IT WORK?

Thanks for the feedback. I was considering getting another ecm cuz i thought mine went bad after an accident since the car would crank but wouldn't fire up. Did a compression test shortly after n found out i have a blown head gasket n that's why the car won't start.
by 302LVR
Thu Jun 29, 2017 7:32 pm
Forum: Engine & Transmission
Topic: 2ZZ-GE REPAIR MANUAL
Replies: 7
Views: 3190

Re: 2ZZ-GE REPAIR MANUAL

ImUrOBGYN wrote:pm'd
Got it thanks! Seems a lot more detailed. I just have to dedicate some time to organizing all the info i need from there but thanks once more.
by 302LVR
Thu Jun 29, 2017 7:26 pm
Forum: Engine & Transmission
Topic: 2ZZ-GE REPAIR MANUAL
Replies: 7
Views: 3190

Re: 2ZZ-GE REPAIR MANUAL

I think the link I referred to is a downloadable copy of what madstyle has online, so perhaps not worth downloading http://madstyle1972.com/Repair/14/201joc05/x040001.pdf seems to be a decent head gasket replacement procedure, with cam and head bolt loosening and tightening sequences and torque spe...
by 302LVR
Wed Jun 28, 2017 6:45 pm
Forum: Engine & Transmission
Topic: 2ZZ-GE REPAIR MANUAL
Replies: 7
Views: 3190

Re: 2ZZ-GE REPAIR MANUAL

Thanks for the link but seems i have to download and activate something but not sure if its safe or not. Hopefully someone can chime in and say if this link/download is trustworthy. My next option would be a Chilton or Haynes manual but i'm not sure if they cover all the important info such as torqu...
by 302LVR
Fri Jun 23, 2017 10:41 am
Forum: Engine & Transmission
Topic: 2ZZ-GE REPAIR MANUAL
Replies: 7
Views: 3190

2ZZ-GE REPAIR MANUAL

Hello to all. Just found out i blew the head gasket on my 03' VGT and will be doing the labor myself. Can anyone provide a link or PDF if available for the tear down/assembly process since this is my first time taking apart a 2zz head. Mostly i want tech info such as torque specs and tightening or l...
by 302LVR
Thu Jun 22, 2017 7:48 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: VIBE GT CRANKS BUT WON'T START
Replies: 13
Views: 4493

Re: VIBE GT CRANKS BUT WON'T START

Well, unfortunately what i feared the most has happened. Ran a few compression tests, even with different gauges to make sure it was right and i got low compression on 3 cylinders so seems like i have a blown head gasket. I have spark and fuel so that would explain why the car sounds lazy when crank...
by 302LVR
Tue Jun 13, 2017 7:37 pm
Forum: Engine & Transmission
Topic: I'm Kinda at a Loss here.....
Replies: 2
Views: 1071

Re: I'm Kinda at a Loss here.....

Did you ever figure this out? Noticed no one ever replied to this issue?
by 302LVR
Tue Jun 13, 2017 7:31 pm
Forum: Engine & Transmission
Topic: On going hard (hot start) & idle issues - done some things but what's next?
Replies: 21
Views: 9780

Re: On going hard (hot start) & idle issues - done some things but what's next?

It does sound like a bad head gasket if the issue remains in that cylinder and especially if the coolant is mysteriously disappearing. Sounds like you might wanna do a radiator pressure test in which you pump air into the cooling system to simulate an overheat. Once you have between 13-16psi or whic...
by 302LVR
Tue Jun 06, 2017 7:11 pm
Forum: Engine & Transmission
Topic: On going hard (hot start) & idle issues - done some things but what's next?
Replies: 21
Views: 9780

Re: On going hard (hot start) & idle issues - done some things but what's next?

Just swapped cyl 2 & 3 spark plug & COP. Cleared code and cyl 3 misfire came back. What I found though is it's only misfiring on startup and a few seconds after. I used a live scanner to see it. I'm going to check into my fuel pressure and filter and see if maybe it doesn't have enough pres...
by 302LVR
Mon Jun 05, 2017 6:55 pm
Forum: Engine & Transmission
Topic: On going hard (hot start) & idle issues - done some things but what's next?
Replies: 21
Views: 9780

Re: On going hard (hot start) & idle issues - done some things but what's next?

I usually try to listen for any hissing noises when looking for a vacuum leak. If you suspect you have one, i like to spray a bit of starting fluid real quick, not soak any parts since the spray is really cold, but that usually makes the rpm go up higher when you have a vacuum leak and the intake of...
by 302LVR
Fri Jun 02, 2017 11:05 am
Forum: Audio, Electronics, Electrical
Topic: CELICA GTS TO VIBE GT ECM. WILL IT WORK?
Replies: 2
Views: 1052

CELICA GTS TO VIBE GT ECM. WILL IT WORK?

Hey guys. I was wondering if a celica gts ecm will work on an 03' Vibe gt being that they're both 2zz powered? I may be having issues with my ecm and saw a gts at my local junkyard the other day so was planning on picking it up but i'm not sure if they're compatible. Any feedback would be appreciate...
by 302LVR
Fri Jun 02, 2017 10:59 am
Forum: Tech Info & Do-It-Yourself Info
Topic: VIBE GT CRANKS BUT WON'T START
Replies: 13
Views: 4493

Re: VIBE GT CRANKS BUT WON'T START

I was also wondering if the ECM off a Celica GTS works on my 03' being that they're both 2zz-ge powered. I saw a gts at my local junkyard the other day i went so was considering this as a worst case scenario in case my ecm went bad. Any input would be greatly appreciated. Thanks.
by 302LVR
Thu Jun 01, 2017 6:57 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: VIBE GT CRANKS BUT WON'T START
Replies: 13
Views: 4493

Re: VIBE GT CRANKS BUT WON'T START

UPDATE : I carefully checked all fuses both in engine area and under dash and found no blown fuses or anything that didn't look right. I also traced many wires going into bundles as well as going to important sensors like crankshaft pos, airbag, etc. The car still just cranks over but won't fire or...
by 302LVR
Thu Jun 01, 2017 6:48 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: How to: Replace the front bumper rubber tipped screws with hardware parts
Replies: 4
Views: 5319

Re: How to: Replace the front bumper rubber tipped screws with hardware parts

Good stuff! Its the small details that count. I like to make it a habit of using motor oil or anti-seize on nuts n bolts whenever i remove and re-install them to prevent stripped hardware.
by 302LVR
Wed Apr 12, 2017 6:53 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: VIBE GT CRANKS BUT WON'T START
Replies: 13
Views: 4493

Re: VIBE GT CRANKS BUT WON'T START

Will do when i get a chance. Thanks.
by 302LVR
Tue Apr 11, 2017 6:55 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: VIBE GT CRANKS BUT WON'T START
Replies: 13
Views: 4493

Re: VIBE GT CRANKS BUT WON'T START

I will check up on all that soon, hopefully tomorrow. Can you tell where the ECM is located? I was under the impression its mounted behind the center console on the dashboard but i'm not 100% sure as i haven't searched it up. Thanks for any help once again.
by 302LVR
Mon Apr 10, 2017 6:59 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: VIBE GT CRANKS BUT WON'T START
Replies: 13
Views: 4493

Re: VIBE GT CRANKS BUT WON'T START

^^^The coolant may have leaked out slowly because once i added water after like 30 minutes of the car cooling down it leaked the water very slowly. I'm aware as well that cold water shouldn't be added to a hot radiator right away. Also, it was raining when i was driving so hopefully it helped keep t...
by 302LVR
Mon Apr 10, 2017 6:43 pm
Forum: Audio, Electronics, Electrical
Topic: Need stereo input!
Replies: 8
Views: 2262

Re: Need stereo input!

I recently purchased an aftermarket touch-screen dvd in-dash unit and i'm very pleased with all the features it has and spent only about $225 with a 3yr extended warranty. Purchase included dash trim kit as well as plug and play harness and it was a breeze to connect(you can watch a youtube video an...
by 302LVR
Wed Apr 05, 2017 9:16 pm
Forum: Engine & Transmission
Topic: 2009 Vibe -- recommend tranny lube, engine oil, spark plugs
Replies: 4
Views: 2006

Re: 2009 Vibe -- recommend tranny lube, engine oil, spark plugs

I agree with Vibenvy. The chemicals and lubricant brands you use is more than any thing personal preference but i tend to use the name brand stuff because of their quality and reputation you can say. The DexCool was designed for vehicles with iron blocks and aluminum heads i believe to fight galvani...
by 302LVR
Wed Apr 05, 2017 8:51 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: VIBE GT CRANKS BUT WON'T START
Replies: 13
Views: 4493

VIBE GT CRANKS BUT WON'T START

Hello all. I was recently involved in a small crash where my 03' vibe gt hydroplaned in the rain on the highway going around 60-65mph and sent me sliding into a concrete divider before hitting it head on and bouncing off of it and into a small ditch. Luckily i wasn't injured and the car wasn't sever...
by 302LVR
Wed Apr 05, 2017 8:21 pm
Forum: Problems & Warranty Issues
Topic: 2009 Vibe GT lunges during aggressive braking
Replies: 23
Views: 3831

Re: 2009 Vibe GT lunges during aggressive braking

I totally agree with JOLT's comment on this issue as most technicians, dealers, and transmission shops today would rather rebuild the whole transmission from scratch than to play the guessing game trying to figure out what is wrong with your vehicle and have the customer return several times for war...
by 302LVR
Wed Apr 05, 2017 7:06 pm
Forum: Audio, Electronics, Electrical
Topic: Quick Moon and Tunes wiring question...
Replies: 4
Views: 1736

Re: Quick Moon and Tunes wiring question...

Not sure what combo speakers you're running but sounds like u went with Fosgate 2 or 3-ways. I'm in the process of installing 2-way components on mine but had an unfortunate setback n i'll get back to it soon. I'm pretty sure if you're only running a 1 way speaker for lows on the door, it will sound...
by 302LVR
Fri Mar 24, 2017 7:15 pm
Forum: Audio, Electronics, Electrical
Topic: JVC HU has Steering Control Wire in Harnes, Where to connect?
Replies: 5
Views: 1527

Re: JVC HU has Steering Control Wire in Harnes, Where to connect?

You can always try the old school way and check the pins on the oem radio harness to see if you find a signal coming from the swc(steering wheel control). Being that u say it only uses 2 wires i can imagine one is + n the other -(ground) but i doubt only one signal wire will control volume, changing...
by 302LVR
Fri Mar 24, 2017 7:07 pm
Forum: Wheels & Tires
Topic: Looking to pickup some Scion TC wheels. Have a question.
Replies: 3
Views: 5205

Re: Looking to pickup some Scion TC wheels. Have a question.

My 03' VGT brings 215/50/17 from factory i believe but i'm currently running a 225/45/17 and haven't really noticed any difference in driveability. I've only had them on for about 6 months though but i'll keep an eye out for any change in speed, MPGs, etc....
by 302LVR
Thu Mar 23, 2017 12:17 pm
Forum: Audio, Electronics, Electrical
Topic: JVC HU has Steering Control Wire in Harnes, Where to connect?
Replies: 5
Views: 1527

Re: JVC HU has Steering Control Wire in Harnes, Where to connect?

I'm not 100% positive but that feature may only work with an aftermarket steering wheel control. If u want go on websites such as crutchfield, sonic electronix, metra, or scosche.com and see if they offer any technical info on wiring it up. Hope that helps.
by 302LVR
Thu Feb 09, 2017 11:51 am
Forum: Off Topic
Topic: Local Police Chase Ends Abruptly - Video
Replies: 4
Views: 4698

Re: Local Police Chase Ends Abruptly - Video

Damn!!! Play stupid games, win stupid prizes.
by 302LVR
Thu Feb 09, 2017 10:01 am
Forum: Audio, Electronics, Electrical
Topic: reverse wire for nav unit
Replies: 9
Views: 3666

Re: reverse wire for nav unit

Good thinking, hadn't thought about that. Indeed if u just splice into the reverse light i'm pretty sure you'll get the signal as soon as the reverse lights come on. Besides that, hope you can figure out your issue very soon.
by 302LVR
Wed Feb 08, 2017 8:51 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: How To: dual-tail light mod for 03-08 Vibes
Replies: 8
Views: 6817

Re: How To: dual-tail light mod for 03-08 Vibes

Heres the added LEDs i did on my 03' Vibe. Definitely improved night visibility for those driving behind me and for my safety basically. [img] [IMG]http://i1186.photobucket.com/albums/z377/302lvr/20150214_155322.jpg[/img] [/img] [img] [IMG]http://i1186.photobucket.com/albums/z377/302lvr/20150214_155...
by 302LVR
Wed Feb 08, 2017 8:42 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: How To: Rewiring the fog-lamp switch the way YOU want it.
Replies: 45
Views: 32513

Re: How To: Rewiring the fog-lamp switch the way YOU want it.

Here's a few pics i took when doing this on my 03' Vibe GT in case anyone is unclear. Basically i went with option #1 which seemed the easiest. Hope it helps anyone in the future. [img] [IMG]http://i1186.photobucket.com/albums/z377/302lvr/20170126_163222.jpg[/img] [/img] [img] [IMG]http://i1186.phot...
by 302LVR
Tue Feb 07, 2017 1:28 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: How To: dual-tail light mod for 03-08 Vibes
Replies: 8
Views: 6817

Re: How To: dual-tail light mod for 03-08 Vibes

I'm pretty much running full LED lights out back including Sylvania 7443 red LEDs for my tail lamps, LED 3rd brake light, and added the trailer lights i mentioned in the above post. It may sound a bit like excess but it really isn't and i did these mods with safety in mind being that Vibes are small...
by 302LVR
Tue Feb 07, 2017 1:13 pm
Forum: Audio, Electronics, Electrical
Topic: Parking brake wire for DVD player
Replies: 7
Views: 2996

Re: Parking brake wire for DVD player

The Android head units suck because Android is free software and the quality control on the hardware, software is poor. The amplifier and sound quality are poor. Trust me, I screwed around with crap brand car audio and now I only use Pioneer. JVC, Sony, Alpine, Kenwood are all quality products, too...
by 302LVR
Tue Feb 07, 2017 12:47 pm
Forum: Audio, Electronics, Electrical
Topic: reverse wire for nav unit
Replies: 9
Views: 3666

Re: reverse wire for nav unit

I was able to locate it above the glovebox. I already had the glovebox removed to get the VSS wire, so it was relatively easy to locate there. First, I have a 2003 Pontiac Vibe GT w/ Manual Transmission. I'm in the process of trying to figure out where the reverse light wire is and found a red-blac...
by 302LVR
Thu Feb 02, 2017 11:07 pm
Forum: Audio, Electronics, Electrical
Topic: Parking brake wire for DVD player
Replies: 7
Views: 2996

Re: Parking brake wire for DVD player

If it's a newer Pioneer, simply grounding out the parking brake wire won't work. That wire is looking for the parking brake to be engaged, released, then engaged again, before video will play and all other locked-out functions become available. You can pull apart the center console and you'll see t...
by 302LVR
Thu Feb 02, 2017 10:53 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: How To: dual-tail light mod for 03-08 Vibes
Replies: 8
Views: 6817

Re: How To: dual-tail light mod for 03-08 Vibes

I like this idea. So is the yellow (now red) section a functional brake light? When you turn, can you tell it's blinking if the brakes are also lit? I believe he tapped into the parking lights so his LEDs are constantly on but not alternating on/off with the blinker. I'm also pretty sure the amber ...
by 302LVR
Wed Feb 01, 2017 11:15 am
Forum: Audio, Electronics, Electrical
Topic: HID install with DRL & ALC removal
Replies: 7
Views: 1388

Re: HID install with DRL & ALC removal

Here's the link someone else shared to help with the DRL bypass in case someone else is interested in doing it. It's a big help and mandatory i believe when installing HIDs since they won't work off a lower power percentage like the DRLs produce, it's either ON or OFF. Hope it helps others. Thanks o...
by 302LVR
Wed Feb 01, 2017 11:07 am
Forum: Audio, Electronics, Electrical
Topic: Parking brake wire for DVD player
Replies: 7
Views: 2996

Re: Parking brake wire for DVD player

Bringing this back from the dead but i'm also about to install a dvd player into my 03' Vibe and would like to know if anyone else has done this. I believe it needs to have the parking brake engaged in order to watch dvds but i heard theres a way of bypassing this through a switch to ground i believ...
by 302LVR
Wed Feb 01, 2017 10:57 am
Forum: Tech Info & Do-It-Yourself Info
Topic: How To: Rewiring the fog-lamp switch the way YOU want it.
Replies: 45
Views: 32513

Re: How To: Rewiring the fog-lamp switch the way YOU want it.

Thanks to Vibenvy for sending me here. I did the fog light mod to my car this weekend and i'm loving it! I can turn them ON whenever i please regardless of whether i have my high beams on or even with parking lights on or off since i went with OPTION #1 . I would like to add that when doing this, th...
by 302LVR
Wed Feb 01, 2017 10:44 am
Forum: Audio, Electronics, Electrical
Topic: Turning off headlights 09 Vibe
Replies: 85
Views: 54462

Re: (Jims08Vibe)

Quote, originally posted by Jims08Vibe »Procedure the same for 2008? I HATE the lack of control over the lights! I finally grew some.... I cut the wire... Red with white stripe. It appears that I have total control over my headlights. I will test it tonight in the dark to see if auto headlights ki...
by 302LVR
Sun Jan 22, 2017 8:55 pm
Forum: Audio, Electronics, Electrical
Topic: Turning off headlights 09 Vibe
Replies: 85
Views: 54462

Re: Turning off headlights 09 Vibe

^^^ Indeed i'm the type to double check as well but what really worries me is someone else other than me leaving them on if they drive my car. Remember, even Forrest Gump said "Sh*t happens!" :lol:
by 302LVR
Fri Jan 20, 2017 9:24 pm
Forum: Exterior
Topic: HID light blew and don't know where to get a bulb!!!
Replies: 4
Views: 1894

Re: HID light blew and don't know where to get a bulb!!!

^^^I agree with him. Just buy a new set on ebay and keep any spare parts that are known to be working in case of any emergencies. You can buy an aftermarket(chinese) HID kit for like $30-35 nowadays just get something that has 2-3 years of warranty so hopefully you know they'll last at least that lo...
by 302LVR
Wed Jan 18, 2017 7:41 pm
Forum: Audio, Electronics, Electrical
Topic: HID install with DRL & ALC removal
Replies: 7
Views: 1388

Re: HID install with DRL & ALC removal

Btw, here's a link provided by Vibenvy which explains the independent wiring of the fog lights for anyone else who might be interested. Big thanks!
viewtopic.php?t=9844
by 302LVR
Wed Jan 18, 2017 7:26 pm
Forum: Audio, Electronics, Electrical
Topic: HID install with DRL & ALC removal
Replies: 7
Views: 1388

Re: HID install with DRL & ALC removal

Yes, luckily it seems i found another thread where they explain on how to do this along with other options as well as far as independent control of the fog lights. It's a big help IMO since i feel safer having the maximum amount of lighting in dark areas since these cars are pretty small as well. Th...
by 302LVR
Tue Jan 17, 2017 10:38 pm
Forum: Audio, Electronics, Electrical
Topic: Turning off headlights 09 Vibe
Replies: 85
Views: 54462

Re: Turning off headlights 09 Vibe

There are pictures a few posts up in this thread showing the wiring for 03-08. I'm not sure the pin #, but it is indeed the red wire with a white stripe. And here is the how-to for the 03-08 fog lights . This is just what i was looking for! Thanks for the help. I will read up on it in detail tomorr...
by 302LVR
Sun Jan 15, 2017 11:08 pm
Forum: Audio, Electronics, Electrical
Topic: Turning off headlights 09 Vibe
Replies: 85
Views: 54462

Re: Turning off headlights 09 Vibe

Hello. Just read through some of this as i'm interested in eliminating the DRLs on my 03' before i install HIDs. Just wanted to verify if i have to cut PIN #12 which is the red wire with white stripe. I'm assuming it should be the same wiring for 03-08' correct? I will consider doing the mod for the...
by 302LVR
Sun Jan 15, 2017 10:36 pm
Forum: Audio, Electronics, Electrical
Topic: a/c fan stops and starts at random...help!
Replies: 4
Views: 4743

Re: a/c fan stops and starts at random...help!

^^^Agreed! I'd also like to add that you can always start troubleshooting the problem with smaller, less expensive parts first like fuses, relays, Resistor, and even opening up that motor and cleaning the contacts with starting fluid or electrical contact cleaner spray or something. Dirty contact ar...
by 302LVR
Sun Jan 15, 2017 10:29 pm
Forum: Audio, Electronics, Electrical
Topic: HID install with DRL & ALC removal
Replies: 7
Views: 1388

Re: HID install with DRL & ALC removal

Any updates??? :?: :?:
by 302LVR
Thu Jan 12, 2017 10:34 pm
Forum: Audio, Electronics, Electrical
Topic: HID install with DRL & ALC removal
Replies: 7
Views: 1388

Re: HID install with DRL & ALC removal

Sounds good. Any help would be greatly appreciated and yes i know figuring these things out sometimes can be a bit complex. I actually did something similar on my 03' Pathfinder when i ran the oem fogs on an independent switch but still using the factory wiring. Thanks once again.