Search found 17 matches

by Digger02
Mon Apr 01, 2024 4:43 pm
Forum: Tech Info & Do-It-Yourself Info
Topic: Replacing 03 gas tank
Replies: 6
Views: 2371

Re: Replacing 03 gas tank

Sorry I went with the RockAuto metal tank and it got me a bunch more years, plus my kid a bunch more years. Greatest car ever, but Pennsylvania rust finally got it where the State Inspection people said go away and don't ever come back. Good luck fitting the plastic tank to the earlier year Vibe.
by Digger02
Wed Jul 10, 2019 12:32 pm
Forum: Maintenance Bay
Topic: Replacing Gas Tank
Replies: 12
Views: 7170

Re: Replacing Gas Tank

Good luck!
by Digger02
Sun Jan 27, 2019 11:05 am
Forum: Maintenance Bay
Topic: ANOTHER person with a stuck drivers door
Replies: 5
Views: 1307

ANOTHER person with a stuck drivers door

Hey everbody, 2003 base Vibe, with about 205K miles. Driver side front door will not unlock, not with key, not with fob, and not from inside. There is strong resistance if you try to push the unlock lever from inside the vehicle. Removing door panel does not seem possible with the door locked shut. ...
by Digger02
Tue Nov 27, 2018 9:48 am
Forum: Maintenance Bay
Topic: Replacing Gas Tank
Replies: 12
Views: 7170

Re: Replacing Gas Tank

The Permatex does seem to be a workable temporary solution. The area you are trying to apply it to seems to hold some dirt and grime - so you might want to hit the area with an air hose. I actually made up a ball of sticky Permatex and dabbed it all around the crack to try pick up as much loose dirt...
by Digger02
Fri Sep 28, 2018 4:30 pm
Forum: Maintenance Bay
Topic: Evap cannister hose connections
Replies: 0
Views: 1492

Evap cannister hose connections

Does anybody know if there is a part number for a 2003 Vibe gastank EVAP system for the hose that connects to the blue-paint-marked tube to a vent tube on the top rear of the gas tank. I buggered the connector getting that hose off my old EVAP cannister, and now it wont lock onto the new evap cannis...
by Digger02
Fri May 04, 2018 9:46 am
Forum: Tech Info & Do-It-Yourself Info
Topic: Replacing 03 gas tank
Replies: 6
Views: 2371

Re: Replacing 03 gas tank

Sorry for the slow feedback - I did go with the steel tank from RockAuto. It wasn't too bad of a job - it's posted ever here:

viewtopic.php?f=20&t=46207&view=unread& ... f8c#unread
by Digger02
Fri May 04, 2018 9:33 am
Forum: Maintenance Bay
Topic: Replacing Gas Tank
Replies: 12
Views: 7170

Re: Replacing Gas Tank

In my case, there was a slip joint with a clamp just behind the catalytic converter and resonator, so it was easy to remove the back half of the exhaust. I'm pretty sure I removed the whole back half of the exhaust and set it out the way - my gut feel was that the exhaust needs to be removed. If you...
by Digger02
Tue Sep 19, 2017 1:33 pm
Forum: Maintenance Bay
Topic: Replacing Gas Tank
Replies: 12
Views: 7170

Re: Replacing Gas Tank

I ended up doing the RockAuto tank also. It wasn't too bad of the job - I already had a pipe clamp behind the catalytic converter from when I changed it out, so I just had to drop the back half of the exhaust. The heat shield was nearly completely rotted away - I could not re-attach it after the tan...
by Digger02
Sat Aug 19, 2017 10:33 am
Forum: Tech Info & Do-It-Yourself Info
Topic: Replacing 03 gas tank
Replies: 6
Views: 2371

Replacing 03 gas tank

So, the gas tank on my 2003 FWD Base Vibe with 190K miles is leaking gas (for the third time). The first two leaks were a small hose fitting comes of the back of the tank - first, it rusted the whole way around the fitting, and I patched it with the 2-part gas tolerant epoxy. Then, it started rustin...
by Digger02
Sat Aug 19, 2017 10:31 am
Forum: Maintenance Bay
Topic: Replacing Gas Tank
Replies: 12
Views: 7170

Replacing Gas Tank

So, the gas tank on my 2003 FWD Base Vibe with 190K miles is leaking gas (for the third time). The first two leaks were a small hose fitting comes of the back of the tank - first, it rusted the whole way around the fitting, and I patched it with the 2-part gas tolerant epoxy. Then, it started rustin...
by Digger02
Sat Jul 22, 2017 5:42 am
Forum: Engine & Transmission
Topic: 2003 Vibe - How Hard to Change Oil Pressure Sending Sensor Switch
Replies: 5
Views: 2291

Re: 2003 Vibe - How Hard to Change Oil Pressure Sending Sensor Switch

good point - my metric deep sockets only went up to 19mm, my non-metrics up to 1"
by Digger02
Fri Jul 21, 2017 6:06 pm
Forum: Engine & Transmission
Topic: 2003 Vibe - How Hard to Change Oil Pressure Sending Sensor Switch
Replies: 5
Views: 2291

Re: 2003 Vibe - How Hard to Change Oil Pressure Sending Sensor Switch

For anybody that stumbles on this thread in the future, it wasn't too hard - You don't have to pull the radiator out - The wire clip is pretty easy to release - press hard on the flat spot of the connector and pull - A 15/16" deep socket, with about a 3" extension on socket got the old pre...
by Digger02
Fri Jul 21, 2017 2:49 am
Forum: Engine & Transmission
Topic: 2003 Vibe - How Hard to Change Oil Pressure Sending Sensor Switch
Replies: 5
Views: 2291

Re: 2003 Vibe - How Hard to Change Oil Pressure Sending Sensor Switch

Ok - thanks - I like to know if its possible before I skin my knuckles. I'll give it a go with the radiator in place.

Dave
by Digger02
Thu Jul 20, 2017 5:38 pm
Forum: Engine & Transmission
Topic: 2003 Vibe - How Hard to Change Oil Pressure Sending Sensor Switch
Replies: 5
Views: 2291

2003 Vibe - How Hard to Change Oil Pressure Sending Sensor Switch

Hey, I have a 2003 Vibe Base with about 185K miles. My Vibe just developed a somewhat bad oil leak through the oil pressure sending sensor, just above the oil filter. They have a direct replacement part at Advance Auto, but the video I watched on Youtube was for a Toyota Corolla, and the guy had to ...
by Digger02
Thu Jan 01, 2015 5:26 pm
Forum: Audio, Electronics, Electrical
Topic: I know this is s silly question but...
Replies: 3
Views: 2304

Re: I know this is s silly question but...

I don't know if you ever found the answer to this - there was some good pictures on the matrixowners.com group. You don't need to remove any dash parts or the gear shift knob. All you have to do is press down on the plastic sheet which says P R N D 2 L up near the letter P with a finger and then use...
by Digger02
Fri Sep 21, 2012 10:07 am
Forum: The Vibe Lounge
Topic: New member/new Vibe owner in PA
Replies: 10
Views: 1802

Re: New member/new Vibe owner in PA

Howdy all, I live about 25 miles north of Pittsburgh, near Butler. Thanks for the POR-15 suggestion - I'll probably order some to paint up some of the rusty things on the underside of the car. Its been a great 1st week of driving - about 500 miles of driving, averaging about 32mpg with just a few dr...
by Digger02
Sun Sep 16, 2012 4:21 pm
Forum: The Vibe Lounge
Topic: New member/new Vibe owner in PA
Replies: 10
Views: 1802

New member/new Vibe owner in PA

Hey, Just bought a 2003 Pontiac Vibe with 100K miles - hope to find help here doing standard maintenance stuff - brakes, rotors, exhaust, fixing rust, etc. The Vibe I bought spent its life in PA, and its got some rust underneath - any tips on what to do to keep it from spreading. Also any tips on ke...