Search found 39 matches

by SnowFish
Tue Oct 25, 2016 9:09 am
Forum: Exterior
Topic: Installing roof rails
Replies: 7
Views: 1851

Re: Installing roof rails

How about this?

Image

;)
by SnowFish
Sat Oct 22, 2016 9:36 am
Forum: Exterior
Topic: Installing roof rails
Replies: 7
Views: 1851

Re: Installing roof rails

Image

Bike trays are now flipped to allow the hatch to open further.

Check out this link.

viewtopic.php?f=33&t=38211&p=429079#p429079

Has the full story.
by SnowFish
Fri Oct 21, 2016 10:42 am
Forum: Exterior
Topic: Installing roof rails
Replies: 7
Views: 1851

Re: Installing roof rails

Should be everything, that you need to know right here.

Image

viewtopic.php?f=33&t=38211&p=429079#p429079

Stay in touch. Cheers.
by SnowFish
Wed Jan 29, 2014 6:17 pm
Forum: Problems & Warranty Issues
Topic: Check Engine + SensaTrac + VSC OFF *flashing*
Replies: 75
Views: 92998

Re: Check Engine + SensaTrac + VSC OFF *flashing*

Our 2010 Vibe, with 65,000 miles, is have the same Check Engine, Traction Control, and VSC Light Flashing. Check engine code is P0138.....O2 sensor. I cleared the code, with my scanner last week, and now it's back. Just cleared it again and checked the gas cap. Has there been any definitive solution...
by SnowFish
Fri Jan 18, 2013 3:07 pm
Forum: Maintenance Bay
Topic: Bought a can of Seafoam...but having second thoughts
Replies: 10
Views: 2573

Re: Bought a can of Seafoam...but having second thoughts

That stuff is Definitely not free. Probably repackaged SeaFoam or Techron. When one can't find a MSDS, that's usually a flag meaning repackage/more $$. Again, if it's been maintained, no reason to put in the oil. It is a great fuel injector cleaner, water displacer, carburetor soak, and preventative...
by SnowFish
Fri Jan 18, 2013 2:27 pm
Forum: Maintenance Bay
Topic: Bought a can of Seafoam...but having second thoughts
Replies: 10
Views: 2573

Re: Bought a can of Seafoam...but having second thoughts

I run a little SeaFoam, occasionally, in every engine I own. Full can, in the gas tank, at every oil change. I also run 1/8 - 1/4 can in just about every tank on my snowmobile, outboards, and other small engines. I do not run it, in the oil, on vehicles that I know the history. Meaning have been reg...
by SnowFish
Sat Sep 01, 2012 5:37 pm
Forum: Maintenance Bay
Topic: 2010 Not Smooth at take off
Replies: 18
Views: 2996

Re: 2010 Not Smooth at take off

I did the re-set. Pretty much the same response. I think it's more getting used to the drive by wire "lag". Not much, but more than the mechanical connection throttles. It's my Wife's car. She does really well in it. I just need more seat time to get the feel for it. For instance, she pull...
by SnowFish
Thu Jul 26, 2012 5:39 am
Forum: Maintenance Bay
Topic: 2010 Not Smooth at take off
Replies: 18
Views: 2996

Re: 2010 Not Smooth at take off

Good info. Thanks. I'll give it a shot. Much appreciated.
by SnowFish
Wed Jul 25, 2012 1:13 pm
Forum: Maintenance Bay
Topic: 2010 Not Smooth at take off
Replies: 18
Views: 2996

Re: 2010 Not Smooth at take off

Does the "reset" apply to drive by wire? or are all Vibes drive by wire?
by SnowFish
Thu Jun 28, 2012 1:59 pm
Forum: Maintenance Bay
Topic: 2010 Not Smooth at take off
Replies: 18
Views: 2996

Re: 2010 Not Smooth at take off

I'll take pictures when mine is done.

TRB, Did you rotated the throttle plate by hand to clean the back side too. I'd hate to un-calibrate the stepper motors, if that's what's in there. Or did you just clean the front end?

Truly a brave new world here.
by SnowFish
Thu Jun 28, 2012 9:33 am
Forum: Maintenance Bay
Topic: 2010 Not Smooth at take off
Replies: 18
Views: 2996

Re: 2010 Not Smooth at take off

Many thanks. I'll just clean the TBI like I normally do. Just not as wild, as I did, on my daughters Saturn. Took almost a whole can of carb cleaner. It was atrocious!
by SnowFish
Thu Jun 28, 2012 8:56 am
Forum: Maintenance Bay
Topic: 2010 Not Smooth at take off
Replies: 18
Views: 2996

Re: 2010 Not Smooth at take off

Interesting..........Now I'm leaning towards my first gut feeling......gummy throat & butterfly. Has anyone cleaned the throttle body butterfly on a drive by wire? I just don't want to screw up the servo (or what ever it is) by manually rotating it to clean the carbon and crud off of the butterf...
by SnowFish
Wed Jun 27, 2012 7:24 pm
Forum: Maintenance Bay
Topic: 2010 Not Smooth at take off
Replies: 18
Views: 2996

Re: 2010 Not Smooth at take off

I bet it's the stinkin' recall! :x Now I have to figure out how to confirm it was done. :?: Pretty sure it was. It was a corporate lease return. :cry:
by SnowFish
Wed Jun 27, 2012 12:09 pm
Forum: Maintenance Bay
Topic: 2010 Not Smooth at take off
Replies: 18
Views: 2996

2010 Not Smooth at take off

Our 2010 2.4L 5 speed auto slap stick is not very smooth at take off. It has the classic symptoms of a sticking throttle body. Really difficult to ease into the throttle for gentle take off. I looked and could not find a throttle cable. Is this a fly by wire? I'm gun shy to flip the butterfly, by ha...
by SnowFish
Tue Jun 12, 2012 8:39 pm
Forum: Maintenance Bay
Topic: Oil Change 0W20.....Really?
Replies: 4
Views: 1125

Oil Change 0W20.....Really?

Getting ready for the first oil change of our new to us 2010 Vibe. Says 0W20 on the filler cap. Is that for real? I think the owners manual says 0W20 also. Seems awful thin.
by SnowFish
Thu May 10, 2012 6:46 am
Forum: Maintenance Bay
Topic: Trans Fluid FINALLY Changed....
Replies: 8
Views: 2704

Re: Trans Fluid FINALLY Changed....

Pretty sure the problems come from back flushing an automatic. Bad idea. This appears to be a manual. Otherwise the fluid would be brownish (auto) instead of black (manual). Think about it...........how can leaving all the ground up particles, and broken down oil/tranny fluid, actually be a benefit?...
by SnowFish
Mon May 07, 2012 7:33 pm
Forum: Exterior
Topic: Roof Rack End Cap!
Replies: 3
Views: 2196

Re: Roof Rack End Cap!

I saved the plugs, from our 2010 Vibe, when we installed the Matrix rack. I'm a pack rat in recovery! :lol: We have no intention of removing the rack. Not sure if they fit, but you can have them if they do. They snap in pretty tight. Not sure how one could fly out. But obviously it did, eh? Maybe gl...
by SnowFish
Sat May 05, 2012 4:25 am
Forum: Exterior
Topic: PLasti-Dipped my ENTIRE car!!
Replies: 23
Views: 4133

Re: PLasti-Dipped my ENTIRE car!!

Some day time pictures would be great. Did you primer first? or just let it buck?
by SnowFish
Tue May 01, 2012 6:54 am
Forum: Exterior
Topic: Roof Rack on 09 Base
Replies: 20
Views: 17917

Re: Roof Rack on 09 Base

There's nice rubber rail pads that come with the rack. No scratching. If you're going to wrench, you need a torque wrench. Actually two. Foot Pounds & Inch Pounds. Even these low end ones will take a ton of guess work out. http://www.harborfreight.com/catalogsearch/result?q=torque+wrench Less th...
by SnowFish
Tue May 01, 2012 5:43 am
Forum: Exterior
Topic: Roof Rack on 09 Base
Replies: 20
Views: 17917

Re: Roof Rack on 09 Base

Careful mounting the top rails. 32.0 Nm isn't that much. That translates to 23.6ftlbs. I went 24ftlbs. Doesn't take much to make it "click". Strip 'em and it will be a major "oh crap" moment. Cross Rails, the allen wrench ones, are 9Nm, which is 6.6ftlbs, or 79.2 inch lbs. We're ...
by SnowFish
Fri Apr 27, 2012 4:43 am
Forum: The Vibe Lounge
Topic: Factory Service Manuals----Paper or CD?
Replies: 6
Views: 859

Factory Service Manuals----Paper or CD?

I'd like to get a Factory Service Manual for our 2010 Vibe. Is the CD version the same as the book? http://www.ebay.com/itm/Pontiac-Vibe-2009-2010-factory-Workshop-SERVICE-REPAIR-MANUAL-base-GT-/110866307626?pt=Motors_Manuals_Literature&hash=item19d0259a2a&vxp=mtr The actual books command a ...
by SnowFish
Wed Apr 25, 2012 10:38 am
Forum: Engine & Transmission
Topic: Is it my starter?
Replies: 22
Views: 2447

Re: Is it my starter?

Clean it up with some nice baking soda & water mixture. grease it up with some vaseline or silicone grease and then report back. Cheers Sounds like a plan. Good idea to clean up the contact surfaces as well. I use a Dremel, with the wire brush attachment, to polish it up. Even New batteries &am...
by SnowFish
Mon Apr 23, 2012 6:22 pm
Forum: Engine & Transmission
Topic: Is it my starter?
Replies: 22
Views: 2447

Re: Is it my starter?

So what's the verdict?
by SnowFish
Mon Apr 23, 2012 11:58 am
Forum: Engine & Transmission
Topic: Performance/Ecomony Chip
Replies: 4
Views: 901

Re: Performance/Ecomony Chip

What I thought. The adds come up when the creepy crawlers find the site. Since I run Fire Fox, I just ad blocked it. No sense in being tempted by the "too good to be trues".
by SnowFish
Mon Apr 23, 2012 11:17 am
Forum: The Vibe Lounge
Topic: New board, new poster
Replies: 11
Views: 2134

Re: New board, new poster

Welcome to the party! And pictures on your first post! Nice!

Great looking ride. Same color as our 2010.

We're barely out of the wrapper, too, to just a welcome for now. I'm still learning. :D
by SnowFish
Mon Apr 23, 2012 11:14 am
Forum: Engine & Transmission
Topic: Performance/Ecomony Chip
Replies: 4
Views: 901

Performance/Ecomony Chip

Saw this link at the top our page. http://www.gfchips.com/pontiacvibe.aspx Is this real? Or just another "try to trick the IAT sensor" (that doesn't work) scam? Any real world experience with these? From what I've seen, with these "VooDoo" chips, is it's better to give $70 to a s...
by SnowFish
Mon Apr 23, 2012 10:50 am
Forum: Engine & Transmission
Topic: Is it my starter?
Replies: 22
Views: 2447

Re: Is it my starter?

In my opinion, the fact that you're still driving it tells me your alternator is working. I live close to work too. Like 3 miles. Should actually be riding my bicycle! :lol: Mine has never (I know, never say never) had problems on the short commutes. However I also have never driven just back and fo...
by SnowFish
Mon Apr 23, 2012 10:15 am
Forum: Engine & Transmission
Topic: Is it my starter?
Replies: 22
Views: 2447

Re: Is it my starter?

......telling me that the battery IS fully charged. I attempt to start....but it's still having difficulty turning over! So you would think by that theory it would NOT be the battery.... I agree. However I have seen batteries fully charged, putting out 12.5 - 13 volts, but they just don't have the ...
by SnowFish
Mon Apr 23, 2012 9:08 am
Forum: Engine & Transmission
Topic: Is it my starter?
Replies: 22
Views: 2447

Re: Is it my starter?

I agree with battery and terminals first. If your battery is 3-4+ years old it's time for a new one anyway. Our local Auto Value will test the old battery before selling you a new one. Pretty sure almost any parts store could do this for you. I'm not ruling out the starter. But, for the most part, i...
by SnowFish
Mon Apr 23, 2012 5:22 am
Forum: The Vibe Lounge
Topic: Manual or Automatic Transmission. Which do you prefer?
Replies: 57
Views: 19408

Re: Manual or Automatic Transmission. Which do you prefer?

We prefer manuals. However the 5 speed slap stick auto is pretty sweet. Kind of the best of both worlds.
by SnowFish
Fri Apr 20, 2012 12:41 pm
Forum: The Vibe Lounge
Topic: Annnnnd...We're Back!!!
Replies: 47
Views: 16925

Re: Annnnnd...We're Back!!!

Image
by SnowFish
Fri Apr 20, 2012 12:18 pm
Forum: Exterior
Topic: Roof Rack on 09 Base
Replies: 20
Views: 17917

Re: Roof Rack on 09 Base

I must say, the Toyota Matrix roof rack is really nice. Original equipment fix & finish. A whole E-Bay $250.00 is well worth it. Here's the install. First remove the plug in the roof channels. http://i772.photobucket.com/albums/yy9/FrozenTows/001rackcover.jpg Next remove the bolts that hold the ...
by SnowFish
Wed Apr 11, 2012 5:48 am
Forum: Exterior
Topic: Roof Rack on 09 Base
Replies: 20
Views: 17917

Re: Roof Rack on 09 Base (Infinity-x)

Dealer wanted $528.00 for the OE racks. Little too salty for my taste.I should be getting the Toyota Matrix rack($250), for our 2010 Vibe, next week. I'll post some pics when installed.
by SnowFish
Sat Apr 07, 2012 11:56 am
Forum: Engine & Transmission
Topic: Timing Belt Replacement interval 2.4?
Replies: 2
Views: 2378

Re: Timing Belt Replacement interval 2.4? (SnowFish)

Many thanks, Sir!
by SnowFish
Sat Apr 07, 2012 11:17 am
Forum: Engine & Transmission
Topic: Timing Belt Replacement interval 2.4?
Replies: 2
Views: 2378

Timing Belt Replacement interval 2.4?

I Did Not see any mention of replacing the timing belt, in the owners manual, for our new to us 2010 2.4L. Car has just under 48k now. I figured the schedule maintenance pages would have said something?
by SnowFish
Sat Apr 07, 2012 1:03 am
Forum: The Vibe Lounge
Topic: Racked my Vibe
Replies: 8
Views: 1555

Re: Racked my Vibe (chassan)

Very nice work! Now I need to come across some roof racks like yours. Hate to resort to the dealership.
by SnowFish
Sat Apr 07, 2012 12:51 am
Forum: The Vibe Lounge
Topic: New to Vibe
Replies: 14
Views: 2406

Re: New to Vibe (SnowFish)

Wow, thanks for all the warm welcomes.Car has under 48k miles. Still on the learning curve of taking off and stopping smoothly. Can't believe the power of this little buddy. And braking, holy cow!We've been driving/modding Geo Metros for the past 10+ years. So going to the Vibe is a quantum leap. No...
by SnowFish
Fri Apr 06, 2012 8:12 am
Forum: The Vibe Lounge
Topic: New to Vibe
Replies: 14
Views: 2406

Thanks. Only plans, as of now, is to find some OEM roof racks to carry the bikes. We have the trays. Just need the racks.
by SnowFish
Fri Apr 06, 2012 6:06 am
Forum: The Vibe Lounge
Topic: New to Vibe
Replies: 14
Views: 2406

New to Vibe

Just picked up a 2010 Vibe. 2.4 Auto. What's up with that slap stick? Sweet! The rest of the car I need to learn. Much exploring.Looking forward to getting to know everyone.

Attached files