GenVibe - Community for Pontiac Vibe Enthusiasts

theangrydwarf1

Quote, originally posted by K-NINE Â»Stupid question alert! So you put the grease on the electrical contact? The dielectric grease helps keep your electrical connections clean and helps prevent arcing between the contacts, it also seals out water. In the case of the spark plug and the boot, you woul...

theangrydwarf1

All of you make good points. On the one hand, if you are installing a large stereo, the extra grounding should help in that aspect. A better ground is a better ground, however running wire all over the place just wastes wire if it doesn't improve anything. On the flip side of the coin, if you are lo...

theangrydwarf1

Well, I'm keeping my fingers crossed. I'm at 95,000 miles on the stock clutch and I'm hoping it will last a good bit longer. My driving is mostly highway, with some intown driving.

theangrydwarf1

Quote, originally posted by ragingfish Â»i think i heard once 24 days @ 375 or until they turn golden brown. You definately dont want to use a slow cooker then.

theangrydwarf1

600lbs, how long does that take to bake?

theangrydwarf1

I missed out on the free pass, oh well. I'm just glad that it was something simple, although difficult to get to. Just dont damron it for next years meet.

theangrydwarf1

First things first, we (Jackson and Ida) want to thank Sewell Pontiac for everything they did for us. We had a great spot on the lot and the food was wonderful. A big thanks to Glenn, Cole and anyone else that helped to put this meet together. We had a great time and are looking forward to coming ba...

theangrydwarf1

That sounds great, better than what we have had lately. Wind gusts upto 40+.

theangrydwarf1

Hey xrs22,I wanted to see how things are comming on the pillars. Thanks again.

theangrydwarf1

Great, we're looking forward to being there. See yall this weekend.

theangrydwarf1

I love it!!! I'm going to have to memorize this song.

theangrydwarf1

I hope to do business with you in the future. Thanks again.

theangrydwarf1

Quote, originally posted by NascarXprt Â»or just wait till Oct and there'll be a digi cam taking pics. I just might do that. Quote, originally posted by NascarXprt Â» cant wiat to see it now. As far as i know, I'm still going. (keeping fingers crossed)

theangrydwarf1

Thanks nuvibe! I'm going to see if I can borrow a digi-cam to take some pics. If I do, I'll post some.

theangrydwarf1

I love how it rides. It's a little rougher than stock, but not much. Definately feels like it hugs the road. I think they helped some with the body roll as well. Over all i say the quality is excellent.

theangrydwarf1

Thanks!! I would love to post some pics, I dont have a digi-cam though. I went with the OEM struts from KYB. I figured my originals had done their due, +86k miles. When I get access to a digi-cam I'll take some pics.

theangrydwarf1

Just installed some S-Techs, new struts, and a Vibrant tower brace. I love the new look of my ride. Brad at Neverenough.com was great.

theangrydwarf1

That's just funny!! I would like to know what they are saying but it is still funny.

theangrydwarf1

Thanks to everyone who posted. I'm trying to get some ideas, so please feel free to add to this. I agree that's more like what im looking for. Where did you find it Lancer?

theangrydwarf1

I would like to find a wing for my vibe and I wanted to see what others have purchased. I'm not interested in the OEM spoilers from GM, I'm looking for something more "ricer". I see that most dont like that look, but I do. Any help is greatly appreciated. Thanks

theangrydwarf1

The base 5-speed has the 1zz engine and the GT has the 2zz, there are some differences between the two. The 2zz has a higher compression ratio of 11.5 to 1. It also has lift, which is a larger cam profile that engages at 6500rpms. These are just a few, others can elaborate on the differences.

theangrydwarf1

Quote, originally posted by xrs22 » i'm taking mine this weekend, had major $$$ problems in april and this month.Bummer, i know how that is. Thanks for getting this setup. These will look awsome.

theangrydwarf1

Just curious, has anyone heard anything more on this?

theangrydwarf1

Great thanks for the help.

theangrydwarf1

The plastic pins that pop in to the frame to hold the spash guards on to the car.

theangrydwarf1

Does anyone know if you can get the tabs that hold the splash guards on to the car at any of the auto parts chains or do you have to go to the dealer to get them? Many of mine are missing and I want to replace them.

theangrydwarf1

Quote, originally posted by Merzbow » But I cannot figure out all the resistor b/s. I was gonna buy some LEDs at Radio Shack but I was not sure how to wire them.Merz, if you look at the LED and see a flat spot near the base of it, thats the negative post. The other side is tied to the postitve (5 o...

theangrydwarf1

if you are going to get the adjustable coilover set, get the ones from Tein. I nearly busted a shock with the skunk2s. Just save your money if you want coilovers and by the Teins.

theangrydwarf1

I'll be sending mine off today. Cant wait to see how they turn out.

theangrydwarf1

Will do. Thanks

theangrydwarf1

Don't feel too bad, I haven't gotten around to sending mine off yet either. I've been so busy with school and work, just haven't had time. I'm hoping to get mine sent out this week.

theangrydwarf1

I switched to Castrol Syntec and I like it.

theangrydwarf1

Welcome to the family.

theangrydwarf1

Sounds good to me.

theangrydwarf1

theangrydwarf1 3 pod a pillar + a plain a pillar/ vibe

theangrydwarf1

I just did. Let us know when and where to send in the money. Thanks.

theangrydwarf1

I would say yes, just dont know what my schedule looks like for the fall.

theangrydwarf1

I replaced mine this weekend. It was time, no wonder why mine idled ruff. Bought the Densos, fifty bucks for all 4 from AutoZone. I think they helped.

theangrydwarf1

The new hood looks great!!!! I may have to see if they still have any, would make a nice addition to my ride. Thanks for the pics.

theangrydwarf1

I would like the 3 pod with the plain passenger side. Thanks abunch.

theangrydwarf1

Glad to see your close to being up and running again. Hope all goes well for you.

theangrydwarf1

I would like in too please.

theangrydwarf1

I think it would be great to set up a meet. It would be nice to get one started down here, get a little representation for us southern folk. I'm looking forward to see how this shapes up.

theangrydwarf1

Quote, originally posted by lordsaber Â»ok cool, i know magnaflow sells different series, what series should i get for best performance and is it gonna sound like a rice burner, also was the performance noticable, the CAI was, but not much, and lastly (sorry for all the questions btw^^) should i go ...

theangrydwarf1

When I get them installed I'll take some pics. Merz, nice AF meter. I'm looking at getting one myself.

theangrydwarf1

I was trying to figure out the best placement for the tubes and wanted to see where others have mounted their tubes. I want to get it planed out so it will take me the least amount of time. Thanks again.

theangrydwarf1

Depending on how they look, I might be interested would prefer a 3 pod a pillar w/ passenger side pillar, but if that one is closed, I would settel for a 2 pod. Looking forward to seeing one installed. How much down would you need?

theangrydwarf1

Quote, originally posted by Thewhite »I'm a Lamborghini Murcielago!You're not subtle, but you don't want to be. Fast, loud, and dramatic, you want people to notice you, and then get out of the way. In a world full of sheep, you're a raging bull.So am I, works for me.

theangrydwarf1

Nice rims. Those are what I'm looking for. I may just have to get some.

theangrydwarf1

Factory:Neptune paintMonotone styleMoons and Tunes 17" rimssport tip6-speed manualPerformance Mods:Injen CAIMagnaflow catback exhaustSpeedSource shifter bushingsSuspension Mods:Vibrant Strut tower braceTein S-techsKyb GR2 strutsDress-up parts:PlasmaGlow LED kit, green (not installed yet)more to...

Search found 159 matches